Sharif Digital Repository

High molecular mass of naphthalene make it non-biodegradable and the biological methods for treated the pollutant are much time consuming. In this paper, two methods of ozonation and aeration are used to remove naphthalene. Because of the industrial wastewater has a great range of pH, in this study different concentrations of soluble naphthalene are placed in variable pH conditions, different contact times and changes in amount of aeration and ozonation. ANOVA results indicated a significant difference between two methods. The average removal of naphthalene by use of ozonation is 55 % and 37 % for aeration. As results, the best conditions that naphthalene are removed is in acidic environment... 

In this study, magnetic nanoparticles (MNPs) modified with poly amidoamine (PAMAM) dendrimers - by adding methyl acrylate and ethylenediamine continuously till 10th generation- which further anchored to benzaldehyde ligand through polymeric bonding and studied as a novel method for synthesizing a nano sorbent for removing naphthalene (NAP) from aqueous environments. Synthesized nanopolymer was characterized by Fourier transform infrared spectroscopy (FTIR), Field-Emission Scanning Electron Microscopy (FE-SEM) equipped with EDS, X-ray Diffraction (XRD), Vibrating Sample Magnetometry (VSM), thermal gravimetric analysis (TGA). Based on the obtained analysis results synthesized average... 

In this research, titanium dioxide-phosphorus (TiO2-P) immobilized on silica phosphoric acid (SPA) was prepared by a simple modified sol–gel method with SPA as a precursor instead of phosphoric acid. TiO2-P thin film photocatalyst immobilized on SPA as a novel high-efficiency photocatalyst was investigated to remove naphthalene as a toxic compound from wastewater. The novel resulting photocatalyst were characterized by energy-dispersive X-ray (EDX) and X-ray diffraction pattern revealed nano-photocatalyst TiO2-P with the average size of 15–20 nm. EDX analysis showed the presence of phosphorus elements in the crystalline structure of TiO2 and diffuse reflectance spectroscopy showed the energy... 

The thermophilic bacterium Nocardia otitidiscaviarum strain TSH1, originally isolated in our laboratory from a petroindustrial wastewater contaminated soil in Iran, grows at 50 °C on a broad range of hydrocarbons. Transformation of naphthalene by strain TSH1 which is able to use this two ring-polycyclic aromatic hydrocarbon (PAH) as a sole source of carbon and energy was investigated. The metabolic pathway was elucidated by identifying metabolites, biotransformation studies and monitoring enzyme activities in cell-free extracts. The identification of metabolites suggests that strain TSH1 initiates its attack on naphthalene by dioxygenation at its C-1 and C-2 positions to give... 

Homogeneous and fairly monosized microspherical structures of polyaniline has been synthesized using a simple soft template method with β-naphthalene sulfonic acid (β-NSA) as both the surfactant and dopant, and ammonium persulfate (APS) as the oxidant at 2-5 C. The morphology of PANI-NSA was successfully controlled from nanotubes to microsphere, by changing the synthesis conditions (i.e. pH, the concentration of surfactant and monomer, and temperature). Some mechanistic aspects of the formation of nanotubes and hollow spheres have been discussed precisely based on SEM, TEM, DLS, FTIR and UV-visible results. Moreover, synthesis was performed under acidic environment to obtain further... 

Methods for the regioselective C-H borylation and subsequent cross-coupling of the 2,1-borazaronaphthalene core are reported. Azaborines are dependent on B-N/C=C isosterism when employed in strategies for developing diverse heterocyclic scaffolds. Although 2,1-borazaronaphthalene is closely related to naphthalene in terms of structure, the argument is made that the former has electronic similarities to indole. Based on that premise, iridium-mediated C-H activation has enabled facile installation of a versatile, nucleophilic coupling handle at a previously inaccessible site of 2,1-borazaronaphthalenes. A variety of substituted 2,1-borazaronaphthalene cores can be successfully borylated and... 

The synthesis of cheap and environmental friendly adsorbent from residual sugarcane bagasse was done for the removal of naphthalene from aqueous solution. The activated carbon dot was obtained by KOH chemical activation of carbon dots. The characteristics of carbon dots and activated carbon dots were determined using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermogravimetric analysis. A series of experiments were conducted in a batch system to assess the effect of the system variables, i.e., initial pH, initial naphthalene concentration, adsorbent dosage, and contact time. The kinetic data showed better fit to the... 

Accelerated Michael-type Friedel-Crafts alkylation of naphthols with nitrostyrenes in the presence of water is reported. The procedure is simple, catalyst-free, and affords good yields of the products. © 2009 Elsevier Ltd. All rights reserved  

A computer-controlled pilot plant has been constructed to study the dynamical behavior and control of the thermal cracking furnace. The governing equations that describe the furnace dynamics are presented, and, based on these equations and a kinetic model, software that simulates the steady-state behavior of the system has been developed. The furnace is divided into eight zones that can be heated independently, and, therefore, any desired temperature profile can be applied. The variables to be measured are the furnace zone temperature, coil outlet temperature (COT), and product yield. Two different control strategies (namely, COT control and furnace wall temperature control) are applied... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

Two new macrocyclic ligands Ln (L and L′) bearing two fluorophore naphthalene moieties were synthesized and characterized by employing 1H and 13C NMR, IR, microanalysis as well as mass spectrometry. Comparative studies on the effect of assorted metal cations as Cr(III), Cu(II), Zn(II), Cd(II), Pb(II), Na(I), Ni(II), Co(II), Ba(II), Fe(II), Al(III), Mg(II), Cs(I), Ca(II), Hg(II), K(I), Mn(II), Ag(I), Fe(III) on fluorescence and UV–vis spectra of Ln in ethanol illustrated that both of the macrocycles were sensitive and selective fluorescence chemosensors for Al(III). Remarkable binding constant values as 1.36 × 105 M−1 and 1.15 × 105 M−1 alongside 1:1 stoichiometry for Al(III)/L and Al(III)/L′... 

A bacterial strain, FBHYA2, capable of degrading naphthalene, was isolated from the American Petroleum Institute (API) separator of the Tehran Oil Refinery Complex (TORC). Strain FBHYA2 was identified as Achromobacter sp. based on physiological and biochemical characteristics and also phylogenetic similarity of 16S rRNA gene sequence. The optimal growth conditions for strain FBHYA2 were pH 6.0, 30°C and 1.0% NaCl. Strain FBHYA2 can utilize naphthalene as the sole source of carbon and energy and was able to degrade naphthalene aerobically very fast, 48 h for 96% removal at 500 mg/L concentration. The physiological response of Achromobacter sp., FBHYA2 to several hydrophobic chemicals... 

Aims: The metabolism of phenanthrene and anthracene by a moderate thermophilic Nocardia otitidiscaviarum strain TSH1 was examined. Methods and Results: When strain TSH1 was grown in the presence of anthracene, four metabolites were identified as 1,2-dihydroxy-1,2-dihydroanthracene, 3-(2-carboxyvinyl)naphthalene-2-carboxylic acid, 2,3-dihydroxynaphthalene and benzoic acid using gas chromatography-mass spectrometry (GC-MS), reverse phase-high performance liquid chromatography (RP-HPLC) and thin-layer chromatography (TLC). Degradation studies with phenanthrene revealed 2,2′-diphenic acid, phthalic acid, 4-hydroxyphenylacetic acid, o-hydroxyphenylacetic acid, benzoic acid, a phenanthrene... 

The surface defluorination of Teflon in powdery form was performed using a chemical treatment. The reaction parameters including the reaction time, sodium, naphthalene concentrations were optimized using a Taguchi method to obtain maximum functionality on the particles surface. The surface functionality of the treated particles was analyzed by FTIR, energy dispersive X-ray analysis (EDX) and surface energy. Both treated (g-PTFE) and untreated (PTFE) Teflon were added to polyamide 66 (PA66) at various loadings up to 6 wt%. Mechanical, differential scanning calorimetry (DSC) and tribological analyses for different PA66/Teflon composites were carried out. The chemical treatment enhanced the... 

A new type of composite material based on carbon nanotubes (CNTs) and sol-gel chemistry was prepared and used as sorbent for needle trap device (NTD). The synthesized composite was prepared in a way to disperse CNTs molecules in a sol-gel polymeric network. CNT/silica composites with different CNT doping levels were successfully prepared, and the extraction capability of each composite was evaluated. Effects of surfactant and the oxidation duration of CNTs on the extraction efficiency of synthesized composites were also investigated. The applicability of the synthesized sorbent was examined by developing a method based on needle trap extraction (NTE) and gas chromatography mass spectrometry...