Sharif Digital Repository

The presence of asphaltene means additional difficulties related to transport and processing due to the increased crude oil viscosity caused by the asphaltene. For a better knowledge of the flow properties of asphaltene containing crude oils, it is necessary to understand how asphaltene affects the rheological properties. The aim of this article is to provide information on such rheological properties of oil-asphaltene slurry systems. The results of rheological experiments show that the non-Newtonian flow curves can be approximated by the Bingham plastic model to determine the apparent viscosity and the yield stress as a function of asphaltene concentration and temperature. An explanation is... 

The aim of present study is to investigate the convective heat and mass transfer in steady MHD boundary layer flow of an electrically conducting micropolar fluid over an inclined surface. Partial differential equations resulting from the mathematical modeling of the phenomenon are reduce to nonlinear ODEs, and a finite difference based scheme has been adopted to iteratively find the numerical solution by employing the successive over-relaxation (SOR) method. A self-developed computer code has been used in the MATLAB environment. Influence of chemical reaction, Brownian motion, thermophoresis, and viscous dissipation on the relevant features of the flow are discussed and analyzed through... 

The aim of present study is to investigate the convective heat and mass transfer in steady MHD boundary layer flow of an electrically conducting micropolar fluid over an inclined surface. Partial differential equations resulting from the mathematical modeling of the phenomenon are reduce to nonlinear ODEs, and a finite difference based scheme has been adopted to iteratively find the numerical solution by employing the successive over-relaxation (SOR) method. A self-developed computer code has been used in the MATLAB environment. Influence of chemical reaction, Brownian motion, thermophoresis, and viscous dissipation on the relevant features of the flow are discussed and analyzed through... 

Electroosmosis is the main mechanism for flow generation in lab-on-a-chip (LOC) devices. The temperature rise due to the Joule heating phenomenon, associated with the electroosmosis, may be detrimental for samples being considered in LOCs. Hence, a complete understanding of the heat transfer physics associated with the electroosmotic flow is of high importance in design and active control of LOCs. The objective of the present study is to estimate the temperature rise and the thermal entry length in electroosmotic flow through rectangular microchannels, having potential applications in LOC devices. Along this line, the power-law rheological model is used to account for non-Newtonian behavior... 

Electroosmosis has many applications in fluid delivery at microscale, sample collection, detection, mixing and separation of various biological and chemical species. In biological applications, most fluids are known to be non-Newtonian. Therefore, the study of thermal features of non-Newtonian electroosmotic flow is of great importance for scientific communities. In the present work, the fully developed electroosmotic flow of power-law fluids in a slit microchannel is investigated. The related equations are transformed into non-dimensional forms and necessary changes are made to adapt them for non-Newtonian fluids of power-law model. Results show that depending on different flow parameters... 

We provide the simulation of electroosmotic phenomenon in nanochannels using the Dissipative Particle Dynamics (DPD) method. We study the electroosmotic phenomenon for both newtonian and non-newtonian fluids. Literature shows that most of past electroosmotic studies have been concentrated on continuum newtonian fluids. However, there are many nano/microfluidic applications, which need to be treated as either non-newtonian fluids or non-continuum fluids. In this paper, we simulate the electroosmotic flow in nanochannel considering no limit if it is neither continuum nor non-nonewtonian. As is known, the DPD method has several important advantages compared with the classical molecular dynamics... 

Cardiovascular diseases are one of the major causes of death in the world; atherosclerosis being one aspect. Carotid bifurcation is one of the sites that are vulnerable to this disease. Wall Shear Stress (WSS) is known to be responsible for the process of atherogenesis. In this study, we have simulated the blood flow for Newtonian and non-Newtonian, steady and unsteady, flow conditions in three idealistic and five realistic geometries. A risk factor has been presented based on the results of wall shear stress and, then, a relation was found between geometrical features and the wall shear stress risk factor. Our main conclusions are: 1) The non-Newtonian behavior of blood elevates the value... 

Phase behavior of active crude oil/alkaline was systematically studied in the presence of cosolvents. For this purpose, several factors have been considered: alkaline concentration, oil concentration, and type of brine. The best composition was used to generate emulsion for rheology and displacement tests. Furthermore, precipitation of alkaline was eliminated by its synergy with EDTA. Next, rheology of emulsion was analyzed by which a Power law model was developed that indicates non-Newtonian behavior of emulsion. Moreover, the viscosity of emulsion was reduced by the addition of cosolvent as well as by the increase of alkaline concentration. Finally, the best formulation (containing... 

We use the dissipative particle dynamics (DPD) method to simulate the non-Newtonian electroosmotic flow (EOF) through nanochannels. Contrary to a large amount of past computational efforts dedicated to the study of EOF profile, this work pays attention to the EOF of non-Newtonian fluids, which has been rarely touched in past publications. Practically, there are many MEMS/NEMS devices, in which the EOF behaviour should be treated assuming both non-continuum and non-Newtonian conditions. Therefore, our concern in this work is to simulate the EOF through nanochannels considering both non-Newtonian fluid properties and non-continuum flow conditions. We have chosen DPD as our working tool because... 

Since the discovery of inertial focusing in 1961, numerous theories have been put forward to explain the migration of particles in inertial flows, but a complete understanding is still lacking. Recently, computational approaches have been utilized to obtain better insights into the underlying physics. In particular, fundamental aspects of particle focusing inside straight and curved microchannels have been explored in detail to determine the dependence of focusing behavior on particle size, channel shape, and flow Reynolds number. In this review, we differentiate between the models developed for inertial particle motion on the basis of whether they are semi-analytical, Navier-Stokes-based,... 

Purpose - This paper sets out to present a fully explicit smoothed particle hydrodynamics (SPH) method to solve non-Newtonian fluid flow problems. Design/methodology/approach - The governing equations are momentum equations along with the continuity equation which are described in a Lagrangian framework. A new treatment similar to that used in Eulerian formulations is applied to viscous terms, which facilitates the implementation of various inelastic non-Newtonian models. This approach utilizes the exact forms of the shear strain rate tensor and its second principal invariant to calculate the shear stress tensor. Three constitutive laws including power-law, Bingham-plastic and... 

Nanofluids are widely used as the continuous phase during droplet formation in microsystems due to their impressive features such as excellent thermal, magnetic, and interfacial properties. Although it is well-known that nanofluids are susceptible to exhibit non-Newtonian behavior even at a low concentration of nanoparticles, effects of non-Newtonian behavior of nanofluids have not been studied on droplet formation thus far. In this study, oil-in-water droplet formation with a relatively high viscosity ratio of the immiscible phases was studied numerically in a T-junction microchannel. To inspect the non-Newtonian effects of aqueous nanofluids on droplet formation, empirical data on the... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the...