Sharif Digital Repository

Nonlinear free/forced vibration of a functionally graded graphene nanoplatelet (GNP) reinforced microbeam having geometrical imperfection which is rested on a non-linear elastic substrate have been studied in the present research. Graphene Platelets have been uniformly and non-uniformly scattered in the cross section area of the microbeam. Non-uniform distribution of GNPs is considered to be linear or non-linear type. Geometric imperfection is considered similar to the first vibration mode of microbeam. Size effects due to micro-rotations are captured in this study by means of modified couple stress elasticity. In the case of forced vibration, a uniform harmonic load is exerted to the top... 

The ever increasing density and performance of FPGAS, has increased the importance and popularity of soft processors. The growing gap between the speed of processors and memories can partly be compensated through memory hierarchy. Since memory accesses follow a non-uniform distribution, and vary from one application to another, variable set-associative cache architectures have emerged. In this paper, a novel cache architecture, primarily aimed at soft processors, is proposed to address the variable access demands of applications, through dynamically configurable line-associativity, with no memory overhead. The FPGA implementation of the proposed architecture achieves an average miss count... 

Liquid-liquid two-phase flow is capable of boosting heat transfer in microdevices compared to the single-phase and gas-liquid flows. A thorough investigation is performed here to characterize the heat transfer in water-oil flow in a microtube. Finite element method along with the level-set model is employed for numerical simulation. A main part of this paper is devoted to studying the effect of wettability on the heat transfer performance. Four contact angles of 0°, 30°, 150°, and 180° are investigated, which revealed that the contact angle of 150° produces the highest Nusselt number (Nu). Triple points form at this contact angle, and the slugs slide on the wall, which results in more... 

In this study, static strain aging behaviour of cold rolled steel strips was considered with emphasis on the distribution of residual hydrostatic stress developed during temper rolling. In order to assess residual stress distribution produced by the temper rolling, a three-dimensional model was first employed. Then, samples were rolled at a reduction of 4% under single and double pass rolling programmes and the kinetics of static strain aging phenomenon as well as the required activation energies were then evaluated using hardness and tensile tests on the deformed samples. Considering the predicted residual hydrostatic stress distribution, it was found that tensile hydrostatic stresses... 

Some of electrokinetic-based biomicrofluidic devices work at zeta potentials that are sufficiently high for ionic size (steric) effects to show up. In the present effort, consideration is given to the steric effects on the hydrodynamics of electroosmotic flow in a rectangular microchannel. The distinction between this research and the previous ones is that we account for non-linear rheology of the fluids encountered in biomicrofluidic systems by means of the power-law viscosity model. The method of analysis consists of a finite-difference-based numerical procedure for a non-uniform distribution of grid points, which is applied to the dimensionless form of the governing equations including... 

One of the challenges of P2P systems is to perform load balancing efficiently. A distributed hash table (DHT) abstraction, heterogeneous nodes, and non uniform distribution of objects cause load imbalance in structured P2P overlay networks. Several solutions are suggested to solve this problem but they have some restrictions. They assume the homogeneous capabilities of nodes, unawareness of the link latency during transferring load and imposing logical structures to collect and reassign load. This paper presents a distributed load balancing algorithm with topology awareness using the concept of virtual servers. In our proposed approach, each node collects neighborhood load information from... 

High-temperature superconducting (HTS) transformers have remarkable appealing advantages over conventional ones. But higher brittleness of HTS windings with respect to copper windings makes HTS transformers more vulnerable in short circuit and inrush current situations. During tap changer operation, appreciable asymmetry and non-uniform distribution of ampere-turn along the windings causes high axial component of short circuit forces and makes the situation more severe. In this paper, multi-segment winding method is employed for reduction of axial short circuit forces. An analytical method is presented for calculation of axial component of short circuit forces under tap changer operation.... 

This study presents a comprehensive investigation on hydrodynamic and thermal transport properties of mixed electroosmotically and pressure driven flow in microtubes. Particular emphasis is given to investigating the combined consequences of viscous dissipation, non-uniform Joule heating, and variable thermophysical properties. Analytical solutions are obtained using the Debye-Hückel linearization and constant fluid properties assumption, while a numerical solution is presented for variable fluid properties and non-uniform distribution of Joule heating. The results indicate that, viscous heating effect is pronounced significantly when a favorable pressure gradient exists and cannot be...