Sharif Digital Repository

The CMC of a set of51 alkylpolyoxyethylene glycol ethers, R(EO)(m), and alkylphenol (ethylene oxide) ethers, RΦ(EO)(m), was related to topological, electronic and molecular structure parameters using a stepwise regression method. In development of the models linear and quadratic terms were used without the use of cross terms. Different strategies including Akaike Information Criterion (AIC) were used for choosing the best model. Specification of the best model in agreement with the experiment indicates that volume of the hydrophobic group and surface area of the molecule play a major role in the mechanism of micellization of nonionic surfactants. It was demonstrated that the CMC of these... 

Green and simple synthesis strategies have gained tremendous popularity for the production of anisotropically-shaped noble metallic nanoparticles. The long-term stability of the produced particles, the short timescale of the target reaction(s), as well as the use of non-toxic chemicals, are pivotal features of a useful green procedure. Herein we describe a simple and convenient wet-chemical approach to synthesize stable, non-toxic and water-soluble small gold nanotriangles (GNTs) and gold nanospheres (GNSs) in one step at room temperature, using Tween 20 and Tween 80, respectively. A high level of purity and monodispersity was obtained for the GNTs, in addition to an excellent colloidal... 

The mechanism of surfactants in surfactant-in situ chemical oxidation (S-ISCO) coupled process for trichloroethene (TCE) degradation was firstly reported. The performance of TCE solubilization and inhibition of TCE degradation in three nonionic surfactants (TW-80, Brij-35, TX-100) in PS/Fe(II)/citric acid (CA) system was compared and TW-80 was evaluated to be the optimal surfactant in S-ISCO coupled process due to the best TCE solubilizing ability and minimal inhibition for TCE degradation (only 31.8% TCE inhibition in the presence of 1 g L−1 TW-80 surfactant). The inhibition mechanism in TCE degradation was also demonstrated by comparing the strength of ROSs and PS utilization. In the... 

The rising velocity of air bubbles in surfactant solutions is a sensitive measure for the formation of a dynamic adsorption layer (DAL) at the bubble surface. Due to a certain surface coverage by adsorbed species the bubble surface starts to become immobilized and the rising velocity is retarded. There is a large difference in the retardation effect in presence of the protein β-lactoglobulin (BLG) alone and its mixed solutions with surfactants. In presence of added surfactants BLG forms complexes, which adsorb and retard the bubble rising velocity according to their respective surface activity and adsorption kinetics. While the nonionic surfactant C12DMPO does not show significant increase... 

The influence of the addition of the nonionic surfactants C12DMPO, C14DMPO, C10OH, and C10EO5 at concentrations between 10-5 and 10-1 mmol/L to solutions of β-casein (BCS) and β-lactoglobulin (BLG) at a fixed concentration of 10-5 mmol/L on the dilational surface rheology is studied. A maximum in the viscoelasticity modulus |E| occurs at very low surfactant concentrations (10-4 to 10-3 mmol/L) for mixtures of BCS with C12DMPO and C14DMPO and for mixtures of BLG with C10EO5, while for mixture of BCS with C10EO5 the value of |E| only slightly increased. The |E| values... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Alumina nanofluids are one of the most useful nanofluids. In order to evaluate the colloidal behavior of nanoparticles in alumina/water nanofluid, the influence of effective factors such as pH, ionic strength and surfactants, was studied. Zeta potential, particle size and turbidity change of each nanofluid was investigated. According to the results for 0.05, 0.1 and 0.2 mass% nanofluid, point of zero charge was obtained at pH values of 9.5, 10.2 and 10.5, respectively. The highest nanofluid stability occurred at pH 4 and its lowest was at pH 10. The anionic surfactant had a greater effect on the stability in compared with cationic and nonionic surfactants. By increasing in ionic strength,... 

Alumina nanofluids are one of the most useful nanofluids. In order to evaluate the colloidal behavior of nanoparticles in alumina/water nanofluid, the influence of effective factors such as pH, ionic strength and surfactants, was studied. Zeta potential, particle size and turbidity change of each nanofluid was investigated. According to the results for 0.05, 0.1 and 0.2 mass% nanofluid, point of zero charge was obtained at pH values of 9.5, 10.2 and 10.5, respectively. The highest nanofluid stability occurred at pH 4 and its lowest was at pH 10. The anionic surfactant had a greater effect on the stability in compared with cationic and nonionic surfactants. By increasing in ionic strength,... 

Mass-transfer rates to and from drops in liquid-liquid extraction processes are often reduced by the presence of contaminants. To design an industrial extractor, it is essential to consider this contamination effect in a quantitative manner. To achieve this goal, an experimental investigation was conducted on the mass transfer into single drops for n-butanol-succinic acid-water, as the recommended test system by the European Federation of Chemical Engineering (EFCE). The effects of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethyl ammonium chloride, DTMAC), and nonionic (octylphenol decaethylene glycol ether, Triton X-100) surfactants on the hydrodynamic and mass-transfer... 

The adsorption of proteins at liquid interfaces happens at rather low bulk concentrations due to their rather high surface activity. In contrast typical surfactants start to decrease the surface tension at bulk concentration in the range of mmol/l and reach a minimum value at about two or three orders of magnitude higher concentration. The two proteins studied here, β-lactoglobulin and β-casein, adsorb already remarkably at much lower concentrations, i.e. less than 1. μmol/l. When smallest amounts of a non-ionic surfactant are added to low concentrated protein solutions, changes in the surface tension are observed which cannot be explained by the existing theoretical models. An agreement... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study...