Loading...
Search for: nonlocal-elasticity-theory
0.007 seconds

    Vibration analysis of a rotating nanoplate using nonlocal elasticity theory

    , Article Journal of Solid Mechanics ; Volume 9, Issue 2 , 2017 , Pages 319-337 ; 20083505 (ISSN) Ghadiri, M ; Shafiei, N ; Alavi, S. H ; Sharif University of Technology
    Islamic Azad University  2017
    Abstract
    The nanostructures under rotation have high promising future to be used in nanomachines, nano-motors and nano-turbines. They are also one of the topics of interests and it is new in designing of rotating nano-systems. In this paper, the scaledependent vibration analysis of a nanoplate with consideration of the axial force due to the rotation has been investigated. The governing equation and boundary conditions are derived using the Hamilton's principle based on nonlocal elasticity theory. The boundary conditions of the nanoplate are considered as free-free in y direction and two clamped-free (cantilever plate) and clamped-simply (propped cantilever) in x direction. The equations have been... 

    Evaluation of Material Properties of Short Carbon Nanotube-Based Composites Using Nonlocal ElasticityTheory

    , M.Sc. Thesis Sharif University of Technology Amelirad, Omid (Author) ; Naghdabadi, Reza (Supervisor)
    Abstract
    Classical theory of elasticity, which is founded upon results of mechanical experiments on the large scale materials, has reasonable results in predicting mechanical properties. The basic idea in this theory is that stress at a point of the material is only a function of the local strain and it is independent of the nonlocal strains. Therefore, the size of the material does not play any role in analyzing mechanical behavior of materials using this theory. However, results from experiments and atomic simulations have shown that in nano scale materials, such as carbon nanotubes (CNTs) and their composites, mechanical properties are strongly dependent on the size parameters of these materials.... 

    Free Vibration Analysis of a Functionally Graded Nanotube Under an Initial Stress Using Nonlocal Elasticity Theory

    , M.Sc. Thesis Sharif University of Technology Jafarzadeh Kermani, Mona (Author) ; Eskandari, Morteza (Supervisor)
    Abstract
    In this study, flexural vibration of a functionally graded nanotube under an initial stress is investigated. The small scale effect is taken into consideration based on Eringen’s nonlocal elasticity theory. The material properties are assumed to vary exponentially along the depth direction. The complete effect of the initial stress is taken into account in the problem formulation. The governing equations of motion are derived by using the Hamilton’s principle on the basis of the nonlocal Timoshenko beam theory. An analytical solution of the governing equations, for free vibration of a simply-supported nanotube is presented. Numerical results are presented to investigate the effect of the... 

    Developing an Equivalent Shell Model Based on Classical and Nonlocal Theory for Vibration Analysis of Carbon Nanoscrolls

    , Ph.D. Dissertation Sharif University of Technology Taraghi Osguei, Amin (Author) ; Ahmadian, Mohammad Taghi (Supervisor) ; Asghari, Mohsen (Supervisor)
    Abstract
    Carbon nanoscroll (CNS) is a graphene sheet rolled into a spiral structure. The Equilibrium structure of a CNS depends on the elastic bending energy and van der Waals interactions between layers. In recent decade, research on CNSs received high attention after discovering new techniques to produce high purity CNSs. Modal analysis of the CNS is essential in various applications like sensors and actuators. Therefore, in this research, a shell model for free vibration analysis of the CNS is proposed. After considering CNS as an equivalent shell, the assumed mode technique is used to extract natural frequencies and mode shapes of CNSs in different boundary conditions. The effect of geometric... 

    Theoretical Analysis of Mechanical Properties for Metal Matrix Nanocomposites Reinforced by Carbon Nanotubes Using Nonlocal Elasticity

    , M.Sc. Thesis Sharif University of Technology Amini Niaki, Sina (Author) ; Naghdabadi, Reza (Supervisor) ; Sohrabpour, Saeed (Supervisor)
    Abstract
    Nanocomposites are fabricated by incorporating nano-scale particles in polymer, metal, or ceramic matrices. Metal matrix nanocomposites are a new kind of materials which have shown superior mechanical features, such as high strength, stiffness, and hardness. However, they are not sensitive to high temperature, in contrast to the polymer matrix nanocomposites. Nanoporous materials, also, have wide range of applications in different fields, such as geology, biology, biomechanics, and electronic. Carbon Nanotubes (CNTs) have shown wonderful properties like high Young’s modulus, high resonance frequency and unique electrical behavior. Wonderful mechanical and electrical properties make CNTs... 

    Natural Vibrations of Nanostructures Using a Developed 3D Model Based on Nonlocal Theory of Elasticity

    , M.Sc. Thesis Sharif University of Technology Nili Ahmadabadi, Ali (Author) ; Dehghani Firoozabadi, Rouhollah (Supervisor)
    Abstract
    The goal of this thesis is to survey natural frequencis of nanostructures such as nanobeams and nanoplates using nonlocal theory of elasticity by finite element method. In nonlocal theory of elasticity,the constitutive relation appears as an integral form so that the stress of a point is a function of the strain of all points in the field such that by getting away from the assumed point, the effect of strains on the stress of that point decreases. In fact, the stress on a point is an average of stress in the field and the effect of stress of other points in determined by a function called the kernel function. In order to achieve natural frequencies and shape modes of a structure, we need to... 

    Stability Analysis of Hybrid Nanotubes Based on the Nonlocal Continuum Theories

    , M.Sc. Thesis Sharif University of Technology Rafati Heravi, Jacob (Author) ; Asghari, Mohsen (Supervisor)
    Abstract
    Strong van der Waals (vdW) potential fields of carbon nanotubes (CNTs) makes them capable to encapsulate some nanostructures inside their hollow space, which leads to the construction of new hybrid nanostructures under specific conditions. Carbon nano-peapods, carbon nanowires and the hybrid of DNA and CNT are the main categories of hybrid nanostructures of CNT. Characteristics of hybrid nanotubes are unique and different from those of CNT. In nanostructures, the lattice spacing between individual atoms is considerable with respect to the structural dimensions. Also, the range of internal characteristic length is relatively close to external ones. So that utilizing the classical continuum... 

    Sability and Sibration Analysis for a Type of Special Nano Motor Based on Cylindrical Shell Equations and Nonlocal Elastisity Theory

    , M.Sc. Thesis Sharif University of Technology Torkaman Asadi, Mohammad Ali (Author) ; Dehghani Firouzabadi, Rohollah (Supervisor) ; Haddadpour, Hassan (Co-Advisor)
    Abstract
    The present study investigates the vibrational behavior of a special type of nano-motor based on a thin cylindrical shell model and the nonlocal elasticity theory of Eringen. The presumed nano-motor is comprised of three single walled carbon nanotubes (CNT), where two of them are cantilevered and the third one is located in the middle. The CNT in the middle will suspend due to the Van-der-Waals forces generated from the interaction by the cantilevered CNT pair. Some proper chirality arrangements can conduct electricity and make the middle CNT rotate in extremely high speeds. In fact, the middle CNT rotates on a frictionless elastic foundation. In the present study, the nano-motor is modeled... 

    Application of electrostatically actuated carbon nanotubes in nanofluidic and bio-nanofluidic sensors and actuators

    , Article Measurement: Journal of the International Measurement Confederation ; Volume 73 , September , 2015 , Pages 127-136 ; 02632241 (ISSN) Seyyed Fakhrabadi, M. M ; Rastgoo, A ; Ahmadian, M. T ; Sharif University of Technology
    Elsevier  2015
    Abstract
    The paper investigates the effects of fluid flow on the static and dynamic behaviors of electrostatically actuated carbon nanotubes using nonlocal elasticity theory. The influences of various parameters of fluid flow including fluid viscosity, velocity, mass and temperature on the mechanical behaviors of the carbon nanotubes under static and step DC voltages are studied using this theory. The results computed from the nonlocal elasticity theory are compared with those estimated using the classical elasticity theorem and the outcomes demonstrate the applicability of the electrostatically actuated carbon nanotubes as nano sensors and nano actuators in nanofluidic systems. The nanosystem can be... 

    Thermoelastic damping in nonlocal nanobeams considering dual-phase-lagging effect

    , Article JVC/Journal of Vibration and Control ; Volume 26, Issue 11-12 , 2020 , Pages 1042-1053 Borjalilou, V ; Asghari, M ; Taati, E ; Sharif University of Technology
    SAGE Publications Inc  2020
    Abstract
    This paper aims to present an explicit relation for thermoelastic damping in nanobeams capturing the small-scale effects on both the continuum mechanics and heat conduction domains. To incorporate small-scale effects, the coupled equations of motion and heat conduction are obtained by employing the nonlocal elasticity theory and the dual-phase-lag heat conduction model. Adopting simple harmonic forms for transverse deflection and temperature increment and solving the governing equations, real and imaginary parts of the frequency are extracted. According to the complex frequency approach, a closed-form size-dependent expression for evaluating thermoelastic damping in nanobeams is derived. To... 

    Polysilicon nano-beam model based on modified couple stress and Eringen's nonlocal elasticity theories

    , Article Physica E: Low-Dimensional Systems and Nanostructures ; Vol. 63, issue , 2014 , p. 223-228 Miandoab, E. M ; Pishkenari, H. N ; Yousefi-Koma, A ; Hoorzad, H ; Sharif University of Technology
    Abstract
    In recent years, extensive experiments have shown that classical continuum theory cannot predict the behavior of mechanical microstructures with small size. To accurately design and analyze micro- and nano-electro-mechanical systems, size-dependent continuum theories should be used. These theories model micro- and nano-electro-mechanical systems with higher accuracy because they include size-dependent parameters. In this paper, polysilicon nano-beam is modeled using modified couple stress and Eringen's nonlocal elasticity theories. First, partial differential equations governing the vibration of nano-beams are converted to a one D.O.F. differential equations using Galerkin method, resulting... 

    Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams

    , Article Computer Methods in Applied Mechanics and Engineering ; Volume 322 , 2017 , Pages 615-632 ; 00457825 (ISSN) Shafiei, N ; Mirjavadi, S. S ; MohaselAfshari, B ; Rabby, S ; Kazemi, M ; Sharif University of Technology
    Elsevier B.V  2017
    Abstract
    This study presents analysis on the vibration behavior of the two-dimensional functionally graded (2D-FG) nano and microbeams which are made of two kinds of porous materials for the first time, based on Timoshenko beam theory. The material of the nano and microbeams is modeled as 2D-FGMs according to the power law. The Eringen's nonlocal elasticity and the modified couple stress theories are used, respectively in case of nano and microbeams. The boundary conditions are considered as clamped (CC), simply supported (SS), clamped–simply supported (CS), and cantilever (CF). The governing equations are solved using the generalized differential quadrature method (GDQM). The effects of FG power... 

    Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates: a comparative study on modified couple stress theory and nonlocal elasticity theory

    , Article Journal of Intelligent Material Systems and Structures ; Volume 29, Issue 11 , 2018 , Pages 2492-2507 ; 1045389X (ISSN) Shojaeefard, M. H ; Saeidi Googarchin, H ; Mahinzare, M ; Eftekhari, S. A ; Sharif University of Technology
    SAGE Publications Ltd  2018
    Abstract
    In this article, free vibration behavior of a rotating nano/microcircular plate constructed from functionally graded magneto-elastic material is simulated with the first-order shear deformation theory. For the sake of comparison, the nonlocal elasticity theory and the modified couple stress theory are employed to implement the small size effect in the natural frequencies behavior of the nano/microcircular plate. The governing equations of motion for functionally graded magneto-elastic material nano/microcircular plates are derived based on Hamilton’s principle; comparing the obtained results with those in the literature, they are in a good agreement. Finally, the governing equations are... 

    Nonlocal hcp kernel functions based on ab initio calculations: Pertinent dislocation problems revisited

    , Article Mechanics of Materials ; Volume 160 , 2021 ; 01676636 (ISSN) Shahvaghar Asl, S ; Shodja, H. M ; Sharif University of Technology
    Elsevier B.V  2021
    Abstract
    Eringen's nonlocal theory and an accurate determination of the nonlocal kernel functions for hexagonal close-packed (hcp) crystals are of interest. The kernel functions are closely related to the anisotropy as well as any crystalline symmetries. To this end, five new distinct nonlocal kernel functions which have the characteristics of discrete atomistic Green's functions in the stress space are obtained through consideration of the nonlocal dispersion relations associated with certain directions combined with ab initio Density Functional Perturbation Theory (DFPT) calculations of the pertinent phonon frequencies. This is the first work which provides the nonlocal hcp kernel functions... 

    Analytical and parametric analysis of thermoelastic damping in circular cylindrical nanoshells by capturing small-scale effect on both structure and heat conduction

    , Article Archives of Civil and Mechanical Engineering ; Volume 22, Issue 1 , 2022 ; 16449665 (ISSN) Li, M ; Cai, Y ; Bao, L ; Fan, R ; Zhang, H ; Wang, H ; Borjalilou, V ; Sharif University of Technology
    Springer Science and Business Media Deutschland GmbH  2022
    Abstract
    This article intends to examine thermoelastic damping (TED) in circular cylindrical nanoshells by considering small-scale effect on both structural and thermal areas. To fulfill this aim, governing equations are extracted with the aid of nonlocal elasticity theory and dual-phase-lag (DPL) heat conduction model. Circular cylindrical shell is also modeled on the basis of Donnell–Mushtari–Vlasov (DMV) equations for thin shells. By inserting asymmetric simple harmonic oscillations of nanoshell into motion, compatibility and heat conduction equations, the size-dependent thermoelastic frequency equation is obtained. By solving this equation and deriving the frequency of nanoshell affected by... 

    Generalized thermoelasticity model for thermoelastic damping in asymmetric vibrations of nonlocal tubular shells

    , Article Thin-Walled Structures ; Volume 174 , 2022 ; 02638231 (ISSN) Li, M ; Cai, Y ; Fan, R ; Wang, H ; Borjalilou, V ; Sharif University of Technology
    Elsevier Ltd  2022
    Abstract
    The present article intends to provide a size-dependent generalized thermoelasticity model and closed-form solution for thermoelastic damping (TED) in cylindrical nanoshells. With the aim of incorporating size effect within constitutive relations and heat conduction equation, nonlocal elasticity theory and Guyer–Krumhansl (GK) heat conduction model are exploited. Donnell–Mushtari–Vlasov (DMV) equations are also employed to model the cylindrical nanoshell. By adopting asymmetric simple harmonic form for oscillations of nanoshell and merging the motion, compatibility and heat conduction equations, the nonclassical frequency equation is extracted. By solving this eigenvalue problem and... 

    Nonlocal Kernel Functions for fcc and hcp Crystals with Application to Dislocation Problems

    , Ph.D. Dissertation Sharif University of Technology Shahvaghar Asl, Silda (Author) ; Mohammadi Shodja, Hossein (Supervisor)
    Abstract
    For half a century, the problem of extracting the components of the nonlocal moduli tensor of anisotropic materials has been remained unsolved. In the present work, for the first time, the solution of this problem is proposed and the components of nonlocal moduli tensor are obtained for close-packed crystals, i.e. face center cubic or hexagonal closed packed. To this end, new distinct nonlocal kernel functions which have the characteristics of discrete atomistic Green’s functions in the stress space are obtained through consideration of the nonlocal dispersion relations. Each of dispersion relations are associated with certain directions and are combined with ab initio Density Functional... 

    On size-dependent nonlinear free vibration of carbon nanotube-reinforced beams based on the nonlocal elasticity theory: Perturbation technique

    , Article Mechanics Based Design of Structures and Machines ; 2020 Taati, E ; Borjalilou, V ; Fallah, F ; Ahmadian, M. T ; Sharif University of Technology
    Taylor and Francis Inc  2020
    Abstract
    Based on the first-order shear deformation (FSD) model and nonlocal elasticity theory, the simultaneous effects of shear and small scale on the nonlinear vibration behavior of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) beams are investigated for the first time. To this end, the governing equations of bending and stretching with von Kármán geometric nonlinearity are decoupled into one fourth-order partial differential equation in terms of transverse deflection. A closed-form solution of the nonlinear natural frequency, which can be used in conceptual design and optimization algorithms of FG- CNTRC beams with different boundary conditions, is developed using a hybrid... 

    On size-dependent nonlinear free vibration of carbon nanotube-reinforced beams based on the nonlocal elasticity theory: Perturbation technique

    , Article Mechanics Based Design of Structures and Machines ; Volume 50, Issue 6 , 2022 , Pages 2124-2146 ; 15397734 (ISSN) Taati, E ; Borjalilou, V ; Fallah, and, F ; Ahmadian, M. T ; Sharif University of Technology
    Taylor and Francis Ltd  2022
    Abstract
    Based on the first-order shear deformation (FSD) model and nonlocal elasticity theory, the simultaneous effects of shear and small scale on the nonlinear vibration behavior of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) beams are investigated for the first time. To this end, the governing equations of bending and stretching with von Kármán geometric nonlinearity are decoupled into one fourth-order partial differential equation in terms of transverse deflection. A closed-form solution of the nonlinear natural frequency, which can be used in conceptual design and optimization algorithms of FG- CNTRC beams with different boundary conditions, is developed using a hybrid...