Loading...
Search for: oil-and-gas
0.009 seconds
Total 67 records

    Application of genetic algorithm for optimization of separator pressures in multistage production units

    , Article Chemical Engineering Communications ; Vol. 201, issue. 7 , 2014 , p. 926-938 Ghaedi, M ; Ebrahimi, A. N ; Pishvaie, M. R ; Sharif University of Technology
    Abstract
    In this article, a genetic algorithm is used to optimize the separator pressures in a multistage crude oil and multistage gas condensate production unit with four and three separators respectively. This leads to the generation of more accurate results for the quality and quantity of oil remaining in the stock tank for both crude oil and gas condensate production units. Genetic-based optimized pressures for crude oil separators resulted in 1.8% and 2% enhancement in oil remaining in the stock tank for summer and winter respectively. API gravity of the stock tank oil was improved 2.4% in summer and 2.2% in winter. For the gas condensate production unit, optimized pressures can enhance by 8.6%... 

    Defining mitigation strategies for recurring EPC contract risks

    , Article Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, CRC 2016, 31 May 2016 through 2 June 2016 ; 2016 , Pages 2773-2782 ; 9780784479827 (ISBN) Sadeghi, B ; Mortaheb, M. M ; Kashani, H ; Sharif University of Technology
    American Society of Civil Engineers (ASCE) 
    Abstract
    Engineering, procurement and construction (EPC) contracts are commonly used for the construction of oil and gas production facilities. These projects are subjected to many uncertainties. EPC contractors often assume most of the project risks. Several studies have focused on the identification and analysis of EPC project risks. However, they generally fail to define appropriate and effective risk management strategies. The objective of this study is to define efficient risk mitigation strategies that can be utilized in EPC oil and gas projects. A comprehensive review of literature was conducted to identify the risks in EPC projects. Experts' opinion were used to analyze and categorize these... 

    Solid acid catalytic alkylation: A means for gasoline-aromatics reduction

    , Article Proceedings of the 17th World Petroleum Congress, Rio de Janeiro, 1 September 2002 through 5 September 2002 ; Volume 3 , 2002 , Pages 405-416 Badakhshan, A ; Kazemeini, M ; Khorasheh, F ; Sahebdelfar, S ; Sharif University of Technology
    2002
    Abstract
    Reduction of aromatics implies that the gasoline pool would suffer both quantitatively and qualitatively. Alkylates (highly branched paraffinic hydrocarbons) are ideal substitutes because of their high octane numbers, and environmental friendly characters. Alkylates have played significant roles in US gasoline pool, while in Europe alkylates have a lesser important role. The phase out of lead and the increased capacity of FCC units for making more gasoline from heavier petroleum cuts have enhanced the validity of alkylation processes in petroleum refineries. Based on the data obtained in the laboratory using a new developed catalyst, it is predicted to behave as a successful catalyst for C4... 

    “Environmental Modelling of Oil and Gas Upstream”

    , M.Sc. Thesis Sharif University of Technology Khajehpour, Hossein (Author) ; Sabouhi, Yadollah (Supervisor)
    Abstract
    Oil and gas upstream, is one of the major parts of the energy chain in the world. Processes of production, transportation, processing and conversion of energy carriers are the main parts of this sector. Process units of oil and gas upstream industry are some of most local and global pollution resources in the world. In this research, the consideration of the pollutions from the production, processing and conversion of fossil fuels sector and the optimization of the management choices of each pollutant is subjected. Consideration of the pollutants related to the upstream sector, pollution control and management choices, cost accounting of the environmental impacts, the methods of accounting... 

    Identification and qualification of health, safety and environmental risks on construction of projects in Iranian petroleum industry

    , Article Proceedings, Annual Conference - Canadian Society for Civil Engineering Volume 4, 2012, Pages 3301-3310 ; Volume 4 , 2012 , Pages 3301-3310 ; 9781622768004 (ISBN) Mohammadi, P ; Heshmati, E ; Sharif, H ; Ahmadian Fard Fini, A. R ; Sharif University of Technology
    2012
    Abstract
    Iran is engaged in a long-term program to improve and strengthen its position among producers of petroleum in the world. In this regard, many projects are planned and executed in different fields related to oil and gas industry. Prior to investment in new projects, it is essential to understand and manage major corporate risks and their related consequences. Due to nature of petroleum industry, Health, Safety and Environmental (HSE) issues are associated with such projects and have always been matters of concern. This paper directs readers towards the integrated HSE approach from concept to affect project construction phase. The process of oil production includes exploration, extraction and... 

    Laboratory studies of MEOR in micromodel as a fractured system

    , Article Society of Petroleum Engineers Eastern Regional Meeting 2007: Unbridling Energy's Future, Lexington, KY, 17 October 2007 through 18 October 2007 ; October , 2007 , Pages 39-46 ; 9781604239362 (ISBN) Nourani, M ; Panahi, H ; Biria, D ; Roosta, R ; Haghighi, M ; Mohebbi, A ; Sharif University of Technology
    2007
    Abstract
    Microbial EOR (MEOR) is receiving renewed interest worldwide. The method is based on microorganisms' activities to reduce residual oil of reservoirs, which is dependent on behavior of inherent microorganisms or injection of bioproduct of external microorganisms. Five bacterial species were taken from MIS crude oil that is one of the aging Persian fractured reservoirs. Visualization experiments were carried out to examine the behavior of MEOR in micromodels designed to resemble the fractured system: static and dynamic. A new surface sample of the MIS oil was taken at the well head and physical specifications were measured at the lab. This was fairly light oil with API gravity of 42.5. The... 

    Phase behavior assessment of deposition compound (asphaltene) in heavy oil

    , Article 11th ADIPEC: Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, 10 October 2004 through 13 October 2004 ; 2004 , Pages 783-799 Tabibi, M ; Nikookar, M ; Ganbarnezhad, R ; Pazuki, G. R ; Hosienbeigi, H. R ; Sharif University of Technology
    Society of Petroleum Engineers (SPE)  2004
    Abstract
    In this paper, the soave-Redlich-Kwong (SRK) Eos is modified based on perturbation theory. The parameter of the new cubic equation of state considered reduced temperature and a centric factor dependent. The average of absolute deviations of predicted vapor pressure, vapor volume and saturated liquid density of 30 pure compounds are 0.814.2.G14 and 5.814%, respectively. Also comparison with the new equation of vaporization of pure compounds are given. The florry-Hugines (FH) model is similarly modified by an adjustable parameter. This parameter is defined based on molecular weight of asphaltene to molecular weight of heavy oil ratio in form of polynomial function. The phase behavior of... 

    Emission Estimation for Volatile Organic Compounds (VOCs) form Evaporation Ponds in the Upstream Oil and Gas Industry

    , M.Sc. Thesis Sharif University of Technology Hadivi, Pouya (Author) ; Arhami, Mohammad (Supervisor)
    Abstract
    This study aims to estimate the emission rate of Volatile Organic Components (VOCs) and hazardous air pollutants from the surface of evaporation ponds in oil and gas upstream industries. With respect to the irrecoverable consequences of such emissions, the emission of air pollutants in the oil and gas upstream industries are alarming. Hence, estimation of the pollutants’ emission and surface pollution monitoring are needed for controlling and decreasing of air pollutants in oil and gas upstream industries and also presenting and performing suitable and efficient solutions. The studied ponds in this research include 4 ponds in the oil and gas upstream industries which have been used for... 

    The Optimal Model Development of Technology Selection in Upstream Oil and Gas Industry

    , M.Sc. Thesis Sharif University of Technology Vesali Naseh, Amir (Author) ; Roshandel, Ramin (Supervisor)
    Abstract
    Upstream Oil and Gas due to the high energy consumption offer multiple degree of freedom that can be exploited to reduce capital and/or operating costs. Be use combination of optimization methods (Retrofit and Operational Problems) due to the complex nature of the optimization in UOG. To achieve the optimization Details need to identify relationships between variables. System modeling based on demand in two categories, can be divided: the demand for water and oil based and model based on electricity demand. Existing and new technologies in both evaluated and identificated the application of the system in upstream sections. The linear programming model used to determine the export of... 

    Determination of Suitable Parameters for Design of Nozzle & Diffuser of Surface Jet Pump for Transmission of Low-Pressure Oil Through High- Ressure Oil

    , M.Sc. Thesis Sharif University of Technology Mohseni, Ali (Author) ; Arghavani Hadi, Jamal (Supervisor) ; Hakkaki Fard, Ali (Co-Supervisor)
    Abstract
    Surface Jet Pump (ejector) is one of the most widely used equipment in the industry, which can be used in the oil and gas industry, propulsion and refrigeration systems. One of the uses of surface jet pumps in the oil and gas industry is the use of high-pressure wells to transfar low-pressure wells. The purpose of this research is to measure the transmission feasibility of low-pressure wells using surface jet pumps and optimize surface jet pump geometry. The purpose of optimizing the geometry of the surface jet pump is to maximize the ratio of the discharge rate from the low-pressure well to the high-pressure flow (entranment ratio). One of the most common methods for optimizing the... 

    Study, Research and Diagnosing of Oil and Gas Production Supply by Application of a System Dynamic Approach with Concentration on Supply Chain Collaboration

    , M.Sc. Thesis Sharif University of Technology Ghanbari Nasrabadi, Shiva (Author) ; Fatahi, Omid (Supervisor) ; Khorami, Hamed ($item.subfieldsMap.e)
    Abstract
    In today’s competitive market, organizations need to modify their local perspective on enterprise, to a wider scope including supply chain. Focusing on supply chain, helps a more effective and efficient management for organizations. Today’s supply chain management is an inevitable part of enterprise management for achievement of integration between a supply chain’s partners. Oil and gas supply chain, as a complex supply chain, needs an effective and efficient management which uses from different tools and techniques, diagnoses the related errors and drawbacks among upstream partners. A management with such characteristics is scarce, and in this thesis it is tried to present an effective and... 

    Developing a Base Guideline for Cost Engineering System in Iranian Oil, Gas & Petrochemical Industry Projects

    , M.Sc. Thesis Sharif University of Technology Majdian, Mohammad Ali (Author) ; Eslami, Hossain (Supervisor)

    Experimental Analysis of Injection and Reservoir Brine Compatibility to Prevent Scale Formation during Various Oil and Gas Production Processes

    , M.Sc. Thesis Sharif University of Technology Motayeri, Roya (Author) ; Jamshidi, Saeid (Supervisor)
    Abstract
    Scale formation is an unpleasant phenomenon that occurs when the mixed fluids are incompatible. The scales damage the reservoir, wellbore and the surface facilities. They reduce the effective fluid path and increase the pressure drop of the system; so it is necessary to study the precipitation thermodynamics of scale formation, and present a trustable method for banning the scales from precipitation. In this project, it has been tried to study the value of precipitated scale due to the mixing of two incompatible waters (Civand and Sea Water). The results of which are compared with the results of a geochemical software named PHREEQC. Then, the performance of hydro chloridric acid as a scale... 

    Lithological facies identification in Iranian largest gas field: A comparative study of neural network methods

    , Article Journal of the Geological Society of India ; Vol. 84, issue. 3 , Sep , 2014 , p. 326-334 ; ISSN: 00167622 Kakouei, A ; Masihi, M ; Sola, B. S ; Biniaz, E ; Sharif University of Technology
    Abstract
    Determination of different facies in an underground reservoir with the aid of various applicable neural network methods can improve the reservoir modeling. Accordingly facies identification from well logs and cores data information is considered as the most prominent recent tasks of geological engineering. The aim of this study is to analyze and compare the five artificial neural networks (ANN) approaches with identification of various structures in a rock facies and evaluate their capability in contrast to the labor intensive conventional method. The selected networks considered are Backpropagation Neural Networks (BPNN), Radial Basis Function (RBF), Probabilistic Neural Networks (PNN),... 

    Lithological facies identification in Iranian largest gas field: A comparative study of neural network methods

    , Article Journal of the Geological Society of India ; Vol. 84, issue. 3 , September , 2014 , PP. 326-334 ; ISSN: 00167622 Kakouei, A ; Masihi, M ; Sola, B. S ; Biniaz, E ; Sharif University of Technology
    Abstract
    Determination of different facies in an underground reservoir with the aid of various applicable neural network methods can improve the reservoir modeling. Accordingly facies identification from well logs and cores data information is considered as the most prominent recent tasks of geological engineering. The aim of this study is to analyze and compare the five artificial neural networks (ANN) approaches with identification of various structures in a rock facies and evaluate their capability in contrast to the labor intensive conventional method. The selected networks considered are Backpropagation Neural Networks (BPNN), Radial Basis Function (RBF), Probabilistic Neural Networks (PNN),... 

    Interactions between high power fiber laser and rock in shaley formation during drilling and production operation

    , Article 6th EAGE Saint Petersburg International Conference and Exhibition ; 7-10 April , 2014 , Pages 594-598 ; ISBN: 9781632665393 Bazargan, M ; Koohian, A ; Jalalyfar, H ; Habibpour, M ; Shahvar, M. P ; Madani, A ; Sharif University of Technology
    Abstract
    This paper is presenting the data on interactions between Fiber laser and shale. With this obvious goal that is dependent on improving the efficiency of laser power. The idea of selecting shale sample was because of variety of this rock type in Iranian oil and gas formations. In the experiment, a long pulsed laser beam was arranged to drill and propagate surfaces, in the opposite direction to the earth gravity, and it was used to drill hole from the top to the bottom of cylindrical Shale rock. The heat that been induced from the Fiber laser is absorbed in the direct surfaces in front and cause heat flux generation inside of rock texture. The specific heat transfer inside of shale sample can... 

    Feasibility of using laser bit beside of common bits to drilling slim holes

    , Article Society of Petroleum Engineers - International Petroleum Technology Conference 2013, IPTC 2013: Challenging Technology and Economic Limits to Meet the Global Energy Demand ; Volume 1 , 2013 , Pages 422-433 ; 9781627481762 (ISBN) Bazargan, M ; Jalalyfar, H ; Koohian, A ; Habibpour, M ; Sharif University of Technology
    2013
    Abstract
    The capability level of rotary as well as first generation drilling operation could not be matched for deeply drilling programs. To reach that deep, the increasing in drill string length could also cause an additional constraint on hydraulic performance. The operation of slim hole drilling has significant potential to reduce well costs. This cost might be savings are especially important with increased demand for reduced capital finance under current economic conditions in the Iranian oil and gas industry. This savings achievement could be caused by use of smaller drilling rigs, work over rigs, reduced casing size, reducing requirement for drilling consumables and other costs associated with... 

    Improvement of palm oil and sunflower oil blends by enzymatic interestrification

    , Article International Journal of Food Science and Technology ; Volume 46, Issue 5 , 2011 , Pages 1093-1099 ; 09505423 (ISSN) Yazdi, Z. K ; Alemzadeh, I ; Sharif University of Technology
    Abstract
    Palm oil (PO) and sunflower oil (SFO) blends with varying proportions were subjected to enzymatic interesterification (EIE) using a 1,3-specific immobilised lipase. The interesterified blends were evaluated for their slip melting point (SMP), solid fat content (SFC) at 10-40°C, p-anisidine value, peroxide value, free fatty acids (FFA), induction period of oxidation at 110°C (IP110) and composition of fatty acids by gas chromatography. Under EIE treatment, the blends of PO and SFO in different proportions (20:80, 40:60, 50:50, 60:40 and 80:20) had saturated and unsaturated fatty acid content in the range of 37.6-52.0% and 48.0-62.4%, respectively. The blends showed a considerable reduction in... 

    A combined micro-solid phase-single drop microextraction approach for trace enrichment of volatile organic compounds

    , Article Analytical Methods ; Volume 7, Issue 16 , Jun , 2015 , Pages 6514-6519 ; 17599660 (ISSN) Bagheri, H ; Zare, M ; Piri Moghadam, H ; Es haghi, A ; Sharif University of Technology
    Royal Society of Chemistry  2015
    Abstract
    An attempt was made to combine μ-solid phase extraction and headspace single drop microextraction techniques and use their advantages for trace determination of some volatile organic compounds in aqueous samples. After performing the two-step preconcentration approach, the desired analytes were determined by gas chromatography-mass spectrometry. A resorcinol-formaldehyde-based xerogel was used as the extraction medium in the μ-solid phase extraction (μ-SPE) method. Then, the extracted BTEX was eluted with a rather large amount of methanol. To remove the laborious process including solvent evaporation and further reconstitution, which is usually accompanied by loss of analytes and accuracy,... 

    Caspian Sea negotiation support system

    , Article World Environmental and Water Resources Congress 2010: Challenges of Change - Proceedings of the World Environmental and Water Resources Congress 2010, 16 May 2010 through 20 May 2010 ; 2010 , Pages 2694-2702 ; 9780784411148 (ISBN) Rouhani, O. M ; Madani, K ; Gholizadeh, S ; Sharif University of Technology
    Abstract
    Caspian Sea is currently a subject of one of the world's most intractable disputes, involving five coastal states of Azerbaijan, Iran, Kazakhstan, Russia, and Turkmenistan. The conflict over the legal status of this multinational water body emerged after the collapse of the Soviet Union. Since then the parties have been negotiating without reaching an agreement on the ownerships of waters, and the oil and natural gas beneath them. Although different division methods have been suggested so far for sharing the Caspian Sea, the gains of the countries from sea area and valuable resources remain unclear as the proposed methods are either focused on the areal shares or on the oil and gas shares....