Sharif Digital Repository

Complicated sedimentary processes control the spatial distribution of geological heterogeneities. This serves to make the nature of the fluid flow in the hydrocarbon reservoirs immensely complex. Proper modeling of these heterogeneities and evaluation of their connectivity are crucial and affects all aspects of fluid flow. Since the natural variability of heterogeneity occurs in a myriad of length scales, accurate modeling of the rock type connectivity requires a very fine scheme, which is computationally very expensive. Hence, this makes other alternative methods such as the percolation approach attractive and necessary. The percolation approach considers the hypothesis that a reservoir can... 

Dissolved air precipitation/solvent sublation (DAP/SS) was used for treatment of simulated and real oilfield produced water to generate very fine bubbles which are necessary for effective separation. In this method micro bubbles produced by saturation of air in a pressurized packed column were released in an atmospheric column leading the bubbles to raise resulting trapped contaminants in the Gibbs layer around them to be removed by a layer of immiscible solvent at the top of column. The method was conducted to solutions including Benzene, Toluene and Chlorobenzene (ClB) as part of BTEX contaminants in produced water, mixture of them as simulated produced water and real oilfield produced... 

Scale formation is one of the major problems in oilfields. Removal of scales is a difficult process due to their relative hardness and low solubility. Therefore it is valuable to find a method which can remove damages caused by scales. Ultrasonic radiation is known have the sufficient energy to remove the scales. Our purpose is to investigate the role of ultrasound on permeability increments due to scale removal. Some experiments were carried out to find these effects and observed that ultrasound has increased volumetric mass transfer, concentration and solubility limits. We also worked on a model presented by Tahmasebi et. al[2010] and applied changes on it to make it able to predict... 

Despite the numerous experimental studies concerning asphaltene, the extent of reversibility of asphaltene aggregation at reservoir conditions remains still an elusive and controversial issue in the available literature. In this work, a series of depressurization and repressurization experiments were performed on three different live oils for qualitative and quantitative evaluation of the reversibility of asphaltene aggregation under typical pressure and temperature conditions of oil fields. The obtained results reveal that the kinetics and the extent of reversibility of asphaltene aggregation at elevated pressure and temperature are majorly controlled by the characteristics of the reservoir... 

Wellbore stability is a main concern in drilling operation. Troublesome drilling issues are chemically active formations and/or high-pressure–high-temperature environments. These are mainly responsible for most of wellbore instabilities. Wellbore failure is mostly controlled by the interaction between active shales and drilling fluid in shale formations. The factors influencing this interaction consist of fluid pressure, temperature, composition of drilling fluid, and exposure time. In this paper, a non-linear fully coupled chemo-thermo-poroelasticity model is developed. At first, a fully implicit finite difference model is presented to analyze the problem, and then, it is verified through... 

The positive coupling effect decreases the condensate saturation as a result of very high flow rates in vicinity of the wellbore. The current work challenges the notion that the positive rate effect does not lead in falling trend of condensate saturation around the wellbore in the case of rich gas composition. According to the results obtained from this parameter case study, four distinct trends would appear in the condensate saturation profile of both lean and rich gas compositions. These quadruplet trends are consistent and their occurrence is mainly related to the considered base capillary number (Ncb) which is likely dependent to the composition of the fluid  

Optimization of any production operation is a tool for increasing production rates and reducing production costs. Water flooding is one of the techniques that frequently be used to increase oil recovery after primary depletion. A methodology for optimizing the production by using the net present value of a heterogeneous reservoir under water flooding has been presented, which is based on controlling the bottomhole pressures of the production wells, using smart well technology. For this purpose, a numerical flow simulator is coupled with an optimization program. The technique was implemented on a synthetic two dimensional oil reservoir with heterogeneous permeability. This optimization... 

Image logs provide useful information for fracture study in naturally fractured reservoir. Fracture dip, azimuth, aperture and fracture density can be obtained from image logs and have great importance in naturally fractured reservoir characterization. Imaging all fractured parts of hydrocarbon reservoirs and interpreting the results is expensive and time consuming. In this study, an improved method to make a quantitative correlation between fracture densities obtained from image logs and conventional well log data by integration of different artificial intelligence systems was proposed. The proposed method combines the results of Adaptive Neuro-Fuzzy Inference System (ANFIS) and Neural... 

Complicated sedimentary processes control the spatial distribution of geological heterogeneities. This serves to make the nature of the fluid flow in the hydrocarbon reservoirs immensely complex. Proper modeling of these heterogeneities and evaluation of their connectivity are crucial and affects all aspects of fluid flow. Since the natural variability of heterogeneity occurs in a myriad of length scales, accurate modeling of the rock type connectivity requires a very fine scheme, which is computationally very expensive. Hence, this makes other alternative methods such as the percolation approach attractive and necessary. The percolation approach considers the hypothesis that a reservoir can... 

Sustainable technologies are the main concerns of the 21st century modified oilfield industries. The insufficiency of conventional drilling fluid formulations with a combination of hardly degradable hazardous chemicals as additives raise the demands of field-applicable innovative and environmentally friendly methods. Pistachio Shell discards as degradable wastes, which can intellectually apply in drilling fluid formulation. The experimental oilfield investigations of utilizing pistachio shell powder prove the significant enhancement of rheological properties, reduction of fluid loss and mud cake thickness in both API (Low Pressure —Low Temperature) and High Pressure—High Temperature (HPHT)... 

Numerous cases of casing failure have been reported worldwide. Depletion-induced compaction is one of the main factors that may cause casing failure. Stress perturbation in salt layers may accommodate rock flow which endangers the stability of cased wells. Besides, poor cementing jobs are recognized as one of the wellbore instability causes. These factors need to be considered to determine the mechanism behind the casing failure. In this study, the creep behavior of the caprock salt layer in the southwest Iranian oil fields is experimentally studied through a number of creep tests under conditions of elevated temperature and pressure. Then, a three-dimensional finite element analysis is... 

Interpretation of temperature logs has been done successfully in wells to identify water or gas entries location, detect casing leaks, and evaluate cement placement. This paper shows how knowledge of the Joule-Thomson cooling effect and frictional heating effect can be applied for well test interpretation. Many analysts rely on pressure derivative curve to diagnose wellbore storage period and radial flow regime on pressure transient data. However, there are field examples that flow regimes can't be accurately determined. During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating...