Sharif Digital Repository

Due to role of polymer in increasing sweep efficiency during oil recovery, much attention has been paid to the using polymer solutions in enhanced oil recovery methods. In spite of the existence of the great researches in this area, the role of nanoparticles in modification of the polymer performance in the presence of salts has not been examined before. Furthermore, there is no information about how the dispersed silica nanoparticles affect the heavy oil recovery during the polymer flooding in the presence of divalent cations. In this study, a series of polymer flooding experiments are performed in a quarter five-spot glass micromodel saturated with heavy oil. Solutions of polyacrylamide... 

Abstract original image Smart Enhanced Oil Recovery Process using Core–Shell Nanoparticles: The cover image denotes schematically the enhanced oil recovery process by flooding using an aqueous dispersion of core–shell nanoparticles made up of protected polyacrylamide nanostructures (PPNs). Y. Tamsilian and his colleagues at Sharif University of Technology (Iran) and the Institute for Polymer Material (POLYMAT, Spain) demonstrated the synthesis of polyacrylamide nanoparticles protected with a hydrophobic polystyrene shell by using a one-pot, two-step inverse emulsion polymerization technique, where the polystyrene shell was created by surface polymerization. The presence of the hydrophobic... 

Nanoemulsion is a novel type of emulsified solutions holding great promises for utilizing in industrial applications. Although microemulsions have been the subject of numerous studies in past decades, however, nanoemulsions are quite virgin and merit detailed investigation to scrutinize their characteristics specific to reservoir engineering, in particular, Enhanced Oil Recovery (EOR). To this end, the present study is an attempt to evaluate the effectiveness of a specific nanoemulsion for oil displacement through porous media. In this regard, flooding experiments were designed and Hexa decyl trimethylammonium bromide (CTAB), which is a cationic surfactant, was used as the emulsifying agent.... 

CO2 flooding has been recognized widely as one of the most effective enhanced oil recovery (EOR) technologies for reducing greenhouse emissions while increasing the ultimate recovery of oil reservoirs. Because of the wide variety of parameters that can influence, the outcome of CO2 storage projects reservoir simulation has gained wide popularity. In this study, a fully compositional reservoir simulation model was used to simulate various operational conditions, reservoir properties and fluid composition, and their effects on the amount of CO2 stored and oil recovered. The results can be used for selection of best reservoir candidates for carbon storage and optimization of operational... 

Production of highly viscous tar sand bitumen using Steam Assisted Gravity Drainage (SAGD) with a pair of horizontal wells has advantages over conventional steam flooding. This paper explores the use of Artificial Neural Networks (ANNs) as an alternative to the traditional SAGD simulation approach. Feed forward, multi-layered neural network meta-models are trained through the Back-Error-Propagation (BEP) learning algorithm to provide a versatile SAGD forecasting and analysis framework. The constructed neural network architectures are capable of estimating the recovery factors of the SAGD production as an enhanced oil recovery method satisfactorily. Rigorous studies regarding the hybrid... 

Since oil reservoirs are limited and energy demand is increasing, seeking for high efficient EOR processes or enhancing the efficiency of current proposed EOR methods for producing trapped oil from reservoirs are highly investigated. As a way out, it is possible to couple the EOR and nanotechnology to utilize the efficiency of both methods together. Regarding this possibility, in the present study, in the first stage of investigation stable and uniform water-based solution of nano-sized particles of copper oxide with different concentrations (0.01–0.05 M) were prepared and then injected into the core samples. In the first stage, the effects of different surfactants with respect to their... 

The effects of CO2 and salt type on the interfacial tension (IFT) between crude oil and carbonated brine (CB) have not been fully understood. This study focuses on measuring the dynamic IFT between acidic crude oil with a total acid number of 1.5 mg KOH/g and fully CO2-saturated aqueous solutions consisting of 15,000 ppm of KCl, NaCl, CaCl2 and MgCl2 at 30 °C and a wide range of pressures (500–4000 psi). The results of IFT measurements showed that solvation of CO2 into all the studied aqueous solutions led to an increase in IFT of acidic crude oil (i.e., comparison of IFT of crude oil/CB and crude oil/brine), while no significant effect was observed for pressure. In contrast, the obtained... 

The selective plugging effect of hydrophobic bacteria cell on secondary oil recovery performance was investigated. Water and aqua solution of purified Acinetobacter strain RAG-1 were injected into an oil-saturated heterogeneous micromodel porous media. Pure water injection expelled oil by 41%, while bacterial solution injection resulted in higher oil recovery efficiency (59%). In the simulation section, a smaller part of the heterogeneous geometry was applied as a computational domain. A numerical model was developed using coupled Cahn-Hilliard phase-field method and Navier-Stokes equations, solved by a finite element solver. In the non-plugging model, approximately 50% of the matrix oil was... 

By reducing the exploration of new oil reservoirs, enhanced oil recovery from previous oil reservoirs is a solution to supply energy demand. In order to develop the production, various technologies and methods have been proposed such as steaming, direct heating, flooding by nano-fluid, chemical injection, polymer injection and etc. In the present study, nanofluid flooding has been attempted on a rock reservoir with incomplete cone geometry and its performance has been evaluated on oil recovery. The porous media is considered heterogeneous in simulation in accordance with oil reservoirs. The heterogeneous geometry considered in this study is incomplete cone that is heterogeneous in a random... 

The authors simulated a reservoir by using two-layer perceptron. Indeed a model was developed to simulate the increase in oil recovery caused by bacteria injection into an oil reservoir. This model was affected by reservoir temperature and amount of water injected into the reservoir for enhancing oil recovery. Comparing experimental and simulation results and also the erratic trend of data show that the neural networks have modeled this system properly. Considering the effects of nonlinear factors and their erratic and unknown impacts on recovered oil, the perceptron neural network can develop a proper model for oil recovery factor in various conditions. The neural networks have not been... 

A fundamental chemical enhanced oil recovery (EOR) process is surfactant flooding in which the key mechanism is to reduce interfacial tension between oil and the displacing fluid and hence mobilizing the trapped oil. Surfactant loss by adsorption is one of the most important criteria that governs the economics of the surfactant flooding methods. In addition to this, detrimental effects and high price of currently used surfactants cause EOR process so expensive and unfeasible. This study is aimed to introduce a novel kind of plant based surfactant which is extracted from Zizyphus Spina-Christi tree. In addition, equilibrium adsorption behavior of this novel biosurfactant in aqueous solution... 

CO2 injection is a potentially viable method of enhanced oil recovery for medium oil reservoirs. The authors compare the effect of gas injection strategy (simultaneous water-alternating gas [SWAG], water-alternating gas [WAG], and continuous gas injection [CGI]) on recovery in immiscible, near-miscible, and miscible modes of injection. It has been proved that CGI is not the most efficient injection scenario in oil-wet reservoirs. Miscible and near-miscible core flood tests demonstrated high oil recoveries in all injection strategies due to high capillary numbers achieved as a result of miscibility. The fluid mechanics of floods were discussed using pressure drop data, different mechanics was... 

A simple method for synthesis of novel organogels based on multiwalled carbon nanotubes (MWCNTs) is reported. Three classes of organogels were synthesized by crosslinking polymerization of dodecyl methacrylate with various weight percentages of 1,4-butanediol dimethacrylate, vinyl-group-modified MWCNTs or pristine MWCNTs in the presence of 2,2-azoisobutyronitrile as initiator. In this reaction, the carbon nanotubes (CNTs) served simultaneously as an adsorbent, a comonomer and a crosslinking agent. The oil-absorbent containing CNTs showed much higher swelling capacity in oil and organic solvents compared with that without CNTs. Therefore, CNT-based organogels can be introduced as a promising... 

Many bitumen reservoirs contain shale layers of varying thickness, lateral extent, and frequency. These shale layers, depending on their size, vertical and horizontal locations, and continuity throughout the reservoir, may act as a flow barrier and severely reduce vertical permeability of the pay zone and slow down the steam-assisted gravity drainage steam chamber development. Therefore, to improve productivity in these reservoirs, understanding of the effects of reservoir heterogeneities has become necessary. This work presents numerical investigation of the effects of shale barriers on steam-assisted gravity drainage performance when applied to produce mobile heavy oil. The most concern of... 

A literature review of laboratory and field scale studies on low salinity water (LSW) injection showed that the salinity and composition of injected water can have a significant impact on oil recovery. Historically, extensive research has been completed to understand the mechanisms and factors affecting LSW injection. However, although numerous mechanisms have been proposed to describe the interactions in the target process, none have been widely accepted. In this study, waterflooding tests were used to investigate the advantages, disadvantages, and effect of LSW injection. In laboratory tests, two different brines and crude oil of one of Iran's southern reservoirs were used to assess the... 

Enhanced oil recovery (EOR) methods assisted by gravity drainage mechanism and application of sophisticated horizontal wells bring new hope for heavy oil extraction. Variety of thermal and non-thermal EOR techniques inject an external source of energy and materials such as steam, solvent vapor, or gas through a horizontal well at the top of the reservoir to reduce in-situ heavy oil viscosity. So, the diluted oil becomes mobile and flows downwards by gravity drainage to a horizontal producer located at the bottom of the reservoir. In this paper, a sector model of an Iranian fractured carbonate heavy oil reservoir was provided to simulate and evaluate capability of some EOR techniques such as... 

In this paper, the effect of silica nanoparticles on oil production due to the spontaneous imbibition of brine into oil-wet sandstones has been studied. The imbibed fluids were NaCl 3 wt. % solutions containing various concentrations of nanoparticles and the recovered oil for each solution was compared. The results revealed that nanoparticles yielded more oil recovery. Nanofluid was used after brine imbibition, and the oil recovery increased from 17.8% to 40% while in the case of using the same nanofluid as the first imbibed fluid the oil recovery was 53%. Also, the results indicated that the oil recovery depends on nanoparticle concentrations. © 2019, © 2019 Taylor & Francis Group, LLC