Sharif Digital Repository

In this work a microgrid is established within the geographical perspective of interest. The characteristics of the grid and its urban are employed to determine the candidate points for establishment of EV charging stations. The investment costs and operation costs are calculated for each station realizing the required constraints. This process resulted in optimum selection of EV stations. The optimization is achieved based on two different types of preliminary assumptions. In the first one, it is assumed to have only one station, while in the second one possibility of having multi-stations is considered. Using the total investment and operation costs as the objective function of... 

Recently, demand-response (DR) programmes are one of the appropriate tools for energy systems to encourage flexible customers to participate in the operation of energy systems. One of the complex tasks in multi-energy environments is optimal energy flow (OEF) problem of these systems. In this regard, this study investigates the OEF of an integrated electrical, heat, and gas system considering flexible heat and electrical demands. The conventional DR programme has been combined with the demand-side energy supplying management activity by introducing switching concept among input energy carriers. The way of the supplying energy of flexible customer can be changed by switching among input... 

This paper reports on the application of low-grade sensible waste heat (liquid phase) driven multi-effect distillation (MED) technology to exploit waste heat sources that are generally abundant in the petrochemical industries especially, those located close to the Persian Gulf's coastline. For this purpose, a techno-economic feasibility study by considering local capital and operating costs for a selected petrochemical plant has been conducted. In this study, a sensible waste heat stream (practically at 80 °C in the liquid phase), which is actively cooled by the cooling process of the plant, is considered as the heat source for the proposed desalination process. This process can recover... 

Supplying sustainable energy is of a critical prominence nowadays. A main outcome of the galloping development in energy generation technologies is the ability to integrate multi-carrier energy systems that facilitates meeting the fast growth of energy demand. Energy hub is one of the main infrastructures making the incorporation of multi-carrier systems smoother. In this paper, the optimal scheduling problem of an energy hub structure equipped with combined heat and power, boiler, power-to-gas storage, thermal energy storage and electrical energy storage in order to supply power, heat and gas demands is presented. Power to gas is regarded as a new technology that creates a connection... 

This paper presents a stochastic framework for short-term operation of a distribution company (disco). The proposed framework optimizes disco's operational decisions in two hierarchical stages. The first stage, called day-ahead operation stage (DAOS), deals with the operational decisions on purchases from the day-ahead market and commitment of distributed generation (DG) units. The objective of this stage is to minimize the expected operating cost while the financial risk exposed by uncertain real-time prices and loads is restricted to a given level. The model associated with this stage is based on the mixed-integer programming (MIP) format. The second stage, named real-time operation stage... 

The first step in the accepted methods of overhead transmission line insulation coordination is to specify a reliability criterion, and then based on this constraint the most economic insulation design is sought. While the objective of an optimal insulation design method is to find an insulation design that minimises the total cost (the sum of the installation cost, operational cost and cost of failure), each of the cost components can be determined on a per-year basis taking into account the equipment's lifetimes. In this paper, through application of ATP software and realising the total cost of different transmission line designs, a set of alternative insulation designs using various surge... 

In this work, steady state and dynamic performances of quaternary distillation column sequences designed based on steady state and dynamic cost functions have been investigated. To quantify the dynamic performance, product losses due to disturbances have been considered in the objective function. In addition, variations of operating costs such as utilities have been considered in the objective function. To separate a quaternary mixture into four products, 22 configurations have been used. It has been observed that the feed composition, disturbance frequency and magnitude affect the dynamic behavior strongly. To decrease the optimization computational load, a scheme that provides a suboptimal... 

A microgrid (MG) is a small-scale version of the power system which makes possible the integration of renewable resources as well as achieving maximum demand side management (DSM) utilization. The future power system will be faced with severe uncertainties owing to penetration of renewable resources. Consequently, the uncertainty assessment of system performance is essential. The conventional energy scheduling in an MG may not be suitable for active distribution networks. Hence, this study focuses on the probabilistic analysis of optimal power dispatch considering economic aspects in a multi-carrier networked microgrid. The aim is to study the impact of uncertain behavior of loads, renewable... 

Brushless doubly fed induction generators (BDFIGs) show commercial promise for wind-power generation due to their lower capital and operational costs and higher reliability as compared with doubly fed induction generators. This paper presents a vector-control scheme for a BDFIG operating as a variable-speed generator. The proposed vector controller is developed on the power-winding stator-flux frame and can be used to control both the speed and the reactive power. The machine model and the control system are developed in MATLAB. The test results show that the proposed controller has good dynamic performance when changes in speed and reactive power are applied. © 2009 IEEE  

We propose a component model for the scheduling of combined-cycle gas turbine (CCGT) units by mixed-integer programming (MIP) in which combustion turbines (CTs) and steam turbines (STs) are modeled as individual units. The hourly schedule of CCGT based on the component model is compared with that of the mode model. The modeling of modes, which includes a combination of CTs and STs, would require certain approximations for representing fuel input-power output curves, ramping rate limits, minimum operating time limits, etc. The approximations can result in sub-optimal schedules. Furthermore, the commitment and dispatch of CCGTs based on the mode model will require a real-time dispatch to... 

Power generation consumes a substantial amount of water in the power industry. In order to address the impact of water consumption restriction on the power generation, this paper proposes a security-constrained unit commitment (SCUC) formulation considering water consumption impact as an additional constraint. To this end, the water consumption in power plants is formulated. Consequently, the SCUC is extended to consider the consumed water volume as a restricting factor. A procedure is introduced to investigate the most appropriate point of power generation operation to save a vital amount of water by raising reasonable generation costs. The objective of the proposed model is to minimize the... 

Ejector refrigeration system has many advantages over traditional compressor-based systems, including: simplicity, low installation and operating costs and the ability to operate with low-grade thermal energy sources. However, its main drawbacks are low Coefficient of Performance (COP) and failure at high ambient temperatures. To overcome these problems, a novel methodology for designing a multi-ejector refrigeration system is proposed. This system utilizes a parallel array of ejectors instead of one ejector. Therefore, the system can continuously operate at its optimum efficiency. Each ejector works within a specific range of condensing pressures. The condenser pressure governs the... 

In the near future power systems, efficient management of uncertainties with considering the system constraints without any simplification will be a challenge for system operators. Considering AC constraints leads to providing more accurate schedule of generating units, which can have a significant impact on the reduction of operating costs. Although numerous studies have been done to convexify AC optimal power flow constraints, most of the models are non-linear, which can be intractable for large-scale systems. In this study, a novel linear robust AC model is introduced using a combination of the quadratic convex relaxation (QCR) and the Frank-Wolfe algorithm for linearising the AC... 

This paper presents a day-ahead scheduling approach for a multi-carrier residential energy system (MRES) including distributed energy resources (DERs). The main objective of the proposed scheduling approach is the minimization of the total costs of an MRES consisting of both electricity and gas energy carriers. The proposed model considers both electrical and natural gas distribution networks, DER technologies including renewable energy resources, energy storage systems (ESSs), and combined heat and power. The uncertainties pertinent to the demand and generated power of renewable resources are modeled using the chance-constrained approach. The proposed model is applied on the IEEE 33-bus... 

This study intends to develop a comprehensive procedure for evaluating locational value of a wind farm project incorporating reduction in transmission system losses, load delivery point interruption cost and operating cost of generating units. The energy extracted from the wind farm in normal operation condition is considered to replace the energy from fossil-fueled conventional units. In addition, composite system reliability analysis in the presence of wind power is carried out to evaluate total costs associated with curtailed energy at different load points as well as generation of generating units in contingency conditions. System reliability analysis related to large-scale wind farms,... 

Nowadays, dynamic analysis of air-conditioner units is essential to achieve satisfactory comfort conditions in buildings with low energy consumption and operation cost. In this paper, a nonlinear multi input-multi output model (MIMO) of an air-handling unit (AHU) is considered. In the presence of realistic harmonic disturbances, nonlinear dynamics of AHU is investigated. The effect of various thermodynamics and geometrical parameters on limit cycles behaviour of the indoor temperature is investigated. It is observed that the indoor space volume plays as the bifurcation parameter of the system. Decreasing the indoor space volume leads to the occurrence of secondary Hopf (Neimark) bifurcation... 

This paper develops a system dynamics model to analyze the impacts of different kinds of capacity payment as investment incentive mechanisms in Iranian electricity market. Since it is aimed that the incurred capital and operating costs of generation technologies be recovered in Iranian electricity pool, the noncompetitive capacity payment mechanism has been introduced for this purpose in order to encourage new investments in electric power generation system. In the current mechanism, the capacity payments are designated to the generating units in the whole country electricity market. An annual base value of capacity payment is proposed based on recovering the capital cost of a benchmark... 

Nowadays, dynamic analysis of air-conditioner units is essential to achieve satisfactory comfort conditions in buildings with low energy consumption and operation cost. In this paper, a nonlinear multi input-multi output model (MIMO) of an air-handling unit (AHU) is considered. In the presence of realistic harmonic disturbances, nonlinear dynamics of AHU is investigated. The effect of various thermodynamics and geometrical parameters on limit cycles behaviour of the indoor temperature is investigated. It is observed that the indoor space volume plays as the bifurcation parameter of the system. Decreasing the indoor space volume leads to the occurrence of secondary Hopf (Neimark) bifurcation... 

Purpose - The purpose of this paper is to present a novel approach in terrain following (TF) flight using fuzzy logic. The fuzzy controller as presented in this work decides where and how the aircraft needs to change its altitude. The fast decision-making nature of this method promises real-time applications even for tough terrains in terms of shape and peculiarities. The method could always assist to design trajectories in an off-line manner. Design/methodology/approach - To achieve the aforementioned goal, the method effectively incorporates the dynamics of the aircraft. Basically, the mathematical method employs special relationships among existing slope of the terrain and its derivative...