Sharif Digital Repository

In this paper resilience oriented water and energy hub scheduling for a remote area is presented. The optimal operation scheduling considering maintenance programming and reliability indices are presented. Demands which include electricity, heat and drinking waters are supplied by diesel generators, boilers, combined heat and power units, and drinking water sources such as desalination units and transferring water. The considered system contains renewable energy resources such as wind turbine and photovoltaic arrays as well as electrical storage units. In order to enhance resiliency of system against forced outages of components and regular maintenance programs, maintenance constraints and... 

In the past decade, distribution network operators have been broadly engrossed toward automated distribution networks. The operators acknowledge network automation as an efficient investment toward a better service reliability. This paper aims to provide a new long-term cost/benefit analysis for an optimal level of distribution network automation. In the analysis, reduction in customer outage cost is considered as the benefit of implementing automation systems with capital investment, and annual operation and maintenance costs. In the Finnish regulation model, there is a special incentive based on customer outage cost reduction. As the main contribution of this paper, the impact of earth... 

The proper and reliable operation of circuit breakers (CBs) directly affects the reliability and continuity of electricity services in a power systems. Condition-based maintenance (CBM) is the best economic CB maintenance strategy through its online monitoring (OLM) possibilities. Since there is a large number of CBs in a power system, to equip all CBs with OLM systems is not economically justifiable however. This paper, as the second part of a two-part paper, presents an effective optimization framework to find the optimal number of CBs to be monitored online as the kernel of CBM process. To prove its feasibility, the proposed approach is applied to the IEEE Roy Billinton Test System, which... 

Competition in the electric power industry urges utilities to not only reduce the investment costs, but also to reasonably cut the operation and maintenance expenses as much as possible, while keeping both power quality and reliability requirements met. Reliability-centred maintenance (RCM) has been proven to be in response to this dilemma in power systems and has been yet successfully applied in various engineering contexts. This study introduces a novel approach, as of the first steps of RCM implementation in composite power generation and transmission systems, to identify the critical components for the main sake of a more focused maintenance management. Criticality evaluation is, here,... 

This paper develops a mathematical model based on the stochastic programming for simultaneous generation expansion and retirement planning. Retirement decision of the existing generating units is accommodated since these units are aging more and more. The proposed method is formulated as an optimization problem in which the objective function is to minimize the expected total cost consisting of the investment required for commissioning new units, operation and maintenance costs, the retirement salvage cost, and the system risk cost. The problem is subjected to a set of generating unit and system physical and operational constraints. The modeling of energy limited units is also devised in a... 

Automation is acknowledged by distribution utilities as a successful investment strategy to enhance reliability and operation efficiency. However, practical approaches that can handle the complex decision-making process faced by decision makers to justify the long-term financial effects of distribution automation have remained scarce. An automated and remote-controlled sectionalizing switch play a fundamental role in an automated distribution network. This paper introduces a new optimization approach for distribution automation in terms of automated and remotely controlled sectionalizing switch placement. Mixed-integer linear programming (MILP) is utilized to model the problem. The proposed... 

Ways to reduce an airline's cost has been studied for years. In fact, in order to achieve this goal, ones need to know different types of airline's costs including; fuel and oil, maintenance, Ticketing, passenger services, etc. and their impact on the total cost of an airline. According to announcement of ICAO [1], "maintenance cost (about 11% of total cost) is the second major cost after fuel and oil". Therefore, this may attract airline owners' attention to find ways to control maintenance cost and eventually the total cost of an airline. Though, there are many systematic approaches to analyze cost reduction and making policies, in this article, SD modeling is applied to develop a... 

Automation is acknowledged by distribution utilities as a successful investment strategy to enhance reliability and operation efficiency. However, practical approaches that can handle the complex decision-making process faced by decision makers to justify the long-term financial effects of distribution automation have remained scarce. An automated and remote-controlled sectionalizing switch play a fundamental role in an automated distribution network. This paper introduces a new optimization approach for distribution automation in terms of automated and remotely controlled sectionalizing switch placement. Mixed-integer linear programming (MILP) is utilized to model the problem. The proposed... 

In the past decade, distribution network operators have been broadly engrossed toward automated distribution networks. The operators acknowledge network automation as an efficient investment toward a better service reliability. This paper aims to provide a new long-term cost/benefit analysis for an optimal level of distribution network automation. In the analysis, reduction in customer outage cost is considered as the benefit of implementing automation systems with capital investment, and annual operation and maintenance costs. In the Finnish regulation model, there is a special incentive based on customer outage cost reduction. As the main contribution of this paper, the impact of earth... 

This paper presents a new framework for planning studies of modern distribution networks. Presence of electric vehicles (EVs) and various technologies of distributed generation (DG) technologies are considered in the studies as two upcoming events of the future systems. In this regard, place and capacity of DG units along with the reinforcement of distribution lines are determined running a multi-objective (MO) optimization algorithm. Total losses of the distribution network along with annualized cost of expansion plans including investment, operation and maintenance costs are introduced as the main criteria which should be optimized in the proposed framework. An effective Posteriori... 

Considering the wide spread locations of wind farms in Iran, it is important to develop a suitable decision support system (DSS) to fulfill proper management of wind farms. Extensive literature survey indicates that there are no integrated forms of DSS to manage a set of wind farms. The existing wind farms are performing independently, and there is no practical method for exchanging the online data. DSS can contribute to optimal operation of wind farms, operation and maintenance scheduling, pricing policy, etc. In this study, a geographic information system and RETSCREEN software were linked to the designed DSS to achieve a more suitable result. Also, a huge number of data are constantly... 

Power electronics is becoming an underpinning technology for modern power systems. Power converters are increasingly used in various applications implying different levels of importance in power systems. Hence, optimal decision-making for manufacturing, control, operation and maintenance of them requires understanding of their importance in the power systems. Furthermore, identifying the converters importance may be beneficial for simplifying the system-level reliability modeling in a large Power Electronic based Power Systems (PEPSs). Thereby, a Failure Mode, Effects and Criticality Analysis (FMECA) approach is proposed in this paper in order to figure out the importance of converters in... 

Considering the wide spread locations of wind farms in Iran, it is important to develop a suitable decision support system (DSS) to fulfill proper management of wind farms. Extensive literature survey indicates that there are no integrated forms of DSS to manage a set of wind farms. The existing wind farms are performing independently, and there is no practical method for exchanging the online data. DSS can contribute to optimal operation of wind farms, operation and maintenance scheduling, pricing policy, etc. In this study, a geographic information system and RETSCREEN software were linked to the designed DSS to achieve a more suitable result. Also, a huge number of data are constantly...