Sharif Digital Repository

In the present study, the antibunching effect is considered in a parity time (PT)-symmetric system, using the recently proposed non-Hermitian model for resonant cavities. The model consists of a cavity coupled to an optomechanical system by a chiral mirror, with both cavities being driven coherently. The nonreciprocal coupling strength between the two cavities leads to the generation of the non-Hermitian but PT-symmetric model. The optimal conditions of strong antibunching are calculated in this system, and then the antibunching effect is considered using the two-photon correlation function and the Wigner function. The results showed that this model presented the best control over the strong... 

A horizontally oriented liquid-liquid-liquid microextraction (HOLLLME) setup was developed and applied for the isolation of two major estrogens from aquatic media. In contrast to the conventional procedure, in this setup the extracting microdrop was suspended from a horizontally positioned needle in order to provide much higher stability to the extracting phase. The developed HOLLLME approach was applied to isolate two major selected estrogens from aquatic media followed by high performance liquid chromatography-ultraviolet (HPLC-UV) determination. Estrogens were, initially, extracted from water samples into hexane and subsequently, the back extraction stage was performed with 6 μL of sodium... 

A new and convenient format of single drop microextraction (SDME) was developed and applied for isolation of some selected aryloxyphenoxypropionate herbicides from aquatic media. In contrast to the conventional SDME procedure, in this set-up the extraction microdrop was positioned at the bottom of a conical vial in order to provide much higher stability for the organic extraction phase while a magnetic bar was used for stirring the aqueous solution. A simple magnet was used for positioning the bar on the top of the microdrop prior to stirring. The whole set-up led to the use of any volume of extraction solvent with unlimited stirring rates. Some important extraction parameters such as the... 

L- asparaginase enzyme is a renown enzyme because of its chemotherapeutic properties. This enzyme may also be employed in food processing technology. The present study aimed, optimizing the agitation and aeration rate in L-asparaginase production, using C. utilis, ATCC 9950 in batch fermentation system. Beet molasses used as the carbohydrate source for enzyme production. A maximum asparaginase activity of 245.6 U/ml obtained after 20h of fermentation under optimal condition of 1.25 vvm aeration rate and 300 rpm agitation speed. Purification of the enzyme was also done by Acetone Precipitation and column chromatograph. Purified L-asparaginase revealed molecular weight 75 kDa and 82.7 % yield... 

In this study, leaching of reverberatory furnace dust at Sarcheshmeh was investigated in H2SO4-O3 medium. Response surface methodology based on central composite face-centered design (RSM-CCF) was applied to optimize the operating parameters. The optimal conditions to achieve the principle objectives of maximizing copper dissolution and minimizing iron dissolution from dust were identified to be a temperature of 30 °C, a leaching time of 3 h, an initial pH of 0.5, a pulp density of 20%, and an ozone flow rate of 1 g/h. Under the optimum conditions, the copper and iron concentrations in the leaching solution were found to be 27.11 and 0.90 g/L, respectively. The results showed that selective... 

The current work deals with modification of the surface of a silica-polyamine with amine-based ionic liquid (IL) and its application for removal of Cu2+ from an aqueous media. The absorbent is simply prepared from commercially available reagents. The material is characterized by FT-IR spectroscopy, thermogravimetric analysis (TGA), N2 adsorption-desorption, and transmission electronic microscopy (TEM). Effects of several parameters on absorption efficiency, as well as activity of the absorbent to other metals, are also investigated. Moreover, the reusability of the absorbent is studied at the optimized condition. © The Royal Society of Chemistry 2016  

One of the challenging problems in real-time data-parallel processing applications is to schedule tasks to different servers aiming to increase data locality for higher efficiency or lower delay, and at the same time, doing load balancing to stabilize the system of server-queues. We target this problem, and discuss efficient real-time task scheduling algorithms aimed not only to stabilize the system when the arrival rate is in the capacity region (i.e. throughput optimality condition), but also to minimize the mean delay of all tasks in heavy traffic regime when the arrival rate approaches the capacity boundary (i.e. heavy-traffic optimality condition). In this paper, we point out the data... 

Conjugated linoleic acid (CLA) is one of the most physiological active fatty acids due to its positive effect on prevention of diseases such as obesity, hyperlipidemia, atherosclerosis and cancer. The aim of this study was to optimize the production of conjugated linoleic acid (CLA)% in alkali isomerization of safflower oil including 71% linoleic acid (LA) using response surface methodology (RSM). The effect of three reaction variables such as temperature, reaction time and amount of KOH on CLA production was investigated using design-expert software. The optimal condition determined at this point, 72% total CLA with the yield of 84% temperature reaction time and the amount of KOH were 187.6... 

A Gaussian laser beam tightly focused through a high-numerical-aperture objective lens, so-called optical tweezers, is widely used for piconewton-range force spectroscopy. Utilizing a proper value for parameters such as bead size, numerical aperture of the objective, and power of the laser is always a challenge. Here, we show which set of values for the parameters can maximize lateral trapping efficiency. Our results show that for a high-numerical-aperture force spectroscopy, a bead with a diameter of 4–5 µm is suitable, and that for manipulation using large beads, utilizing a proper value for laser power and numerical aperture of the objective is crucial. We present a practical method for... 

A Gaussian laser beam tightly focused through a high-numerical-aperture objective lens, so-called optical tweezers, is widely used for piconewton-range force spectroscopy. Utilizing a proper value for parameters such as bead size, numerical aperture of the objective, and power of the laser is always a challenge. Here, we show which set of values for the parameters can maximize lateral trapping efficiency. Our results show that for a high-numerical-aperture force spectroscopy, a bead with a diameter of 4–5 µm is suitable, and that for manipulation using large beads, utilizing a proper value for laser power and numerical aperture of the objective is crucial. We present a practical method for... 

In this investigation a theoretical model based on artificial neural network (ANN) and genetic algorithm (GA) has been developed to optimize effective parameters on porosity formation in Al-Si casting alloys. The ANN theory was used to correlate the chemical composition and cooling rate to the amount of porosity. The GA and ANN were incorporated to find the optimal conditions for achieving the minimum porosity percent. By comparing the predicted values with the experimental data - earlier deduced by Dash et al. - it is demonstrated that the combined GA-ANN model is a useful and efficient method to find the optimal conditions for casting of Al-Si alloys associated with the minimum porosity... 

This paper proposes a new coordinated voltage control scheme to ensure voltage security of power systems. The scheme schedules reactive power injection from VAR sources, including synchronous generators and condensers, capacitor banks, switchable reactors and FACTS devices, to ensure desired loading margin of power systems for a given horizon of time. The problem is treated as voltage security constrained multi-period optimal reactive power flow (VSC-MPORPF). To incorporate scheduling of both continuous and discrete VAR sources, the VSC-MPORPF is formulated as a mixed-integer nonlinear programming problem, and is solved using generalized Benders decomposition (GBD). Multi-period formulation...