Sharif Digital Repository

Trusses are suitable load-bearing structural systems for heavy concentrated loads. In this paper, it is shown that it is possible to use active control mechanisms to enhance the load-bearing capacity of the trusses. Under heavy loading, some elements of a truss might experience high stresses and show non-linear behavior, resulting in large deformations in the truss. Under such a condition, some elements of the truss might damage which can lead to the collapse of the truss. Application of control forces on some of the degrees of freedom of the truss can render help the truss tolerate larger forces before its collapse. A neural network can then be trained to learn the relationship between the... 

A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on the splitting of a multiphase topology optimization problem into a series of binary phase topology optimization sub-problems which are solved partially, in a sequential manner, using a traditional binary phase topology optimization solver; internal solver. The coupling between these incomplete solutions is ensured using an outer iteration strategy based on the block coordinate descend method. The presented algorithm provides a general framework to extend the traditional binary phase topology optimization solvers for the solution of multiphase... 

Nonlinear dimensionality reduction methods have demonstrated top-notch performance in many pattern recognition and image classification tasks. Despite their popularity, they suffer from highly expensive time and memory requirements, which render them inapplicable to large-scale datasets. To leverage such cases we propose a new method called "Path-Based Isomap". Similar to Isomap, we exploit geodesic paths to find the low-dimensional embedding. However, instead of preserving pairwise geodesic distances, the low-dimensional embedding is computed via a path-mapping algorithm. Due to the much fewer number of paths compared to number of data points, a significant improvement in time and memory... 

This paper addresses the effect of different optimization criteria for the control purpose of vehicle suspension. In the present study, active vibration control system for a 5 degree-of-freedom (DoF) pitch-plane suspension model with bounce and pitch motions is investigated. In the proposed vehicle model, the impact of the wheel-axle-brake assemblies' masses is also considered. The developed model is controlled using a fuzzy logic controller (FLC) to minimize the vibration of the driver's seat. The controller is designed to control the applied force to the seat. Furthermore, in order to determine the optimal value of fuzzy system parameters, genetic algorithm (GA) optimization search is used... 

This paper addresses the effect of different optimization criteria for the control purpose of vehicle suspension. In the present study, active vibration control system for a 5 degree-of-freedom (DoF) pitch-plane suspension model with bounce and pitch motions is investigated. In the proposed vehicle model, the impact of the wheel-axle-brake assemblies' masses is also considered. The developed model is controlled using a fuzzy logic controller (FLC) to minimize the vibration of the driver's seat. The controller is designed to control the applied force to the seat. Furthermore, in order to determine the optimal value of fuzzy system parameters, genetic algorithm (GA) optimization search is used... 

We propose an efficient and effective nonlinear feature domain noise suppression algorithm, motivated by the minimum mean square error (MMSE) optimization criterion. Multi Layer Perceptron (MLP) neural network in the log spectral domain minimizes the difference between noisy and clean speech. By using this method as a pre-processing stage of a speech recognition system, the recognition rate in noisy environments is improved. We can extend the application of the system to different environments with different noises without re-training it. We need only to train the preprocessing stage with a small portion ofnoisy data which is created by artificially adding different types of noises from the... 

In this paper, we have proposed an efficient and effective nonlinear feature domain noise suppression algorithm, motivated by the minimum mean square error (MMSE) optimization criterion. A Multi Layer Perceptron (MLP) neural network in the log spectral domain has been employed to minimize the difference between noisy and clean speech. By using this method, as a pre-processing stage of a speech recognition system, the recognition rate in noisy environments has been improved. We extended the application ofthe system to different environments with different noises without retraining HMMmodel. We trained the feature extraction stage with a small portion of noisy data which was created by... 

Rammed earth (RE) is an eco-friendly building material and has been capturing special attention among researchers. Many of the recently studied RE additives are extremely resource- and energy-consuming. On the other hand, the usage of fly ash (FA), which is a sustainable replacement for cement, has been scarcely investigated in RE construction. In this paper, an experimental investigation was performed on the physical and mechanical properties of RE materials stabilized with the combination of cement and alkali-activated FA. This scrutiny consists of density measurements, pulse velocity tests, unconfined compression tests, and direct shear tests. Additionally, the carbon dioxide emission and... 

In order to estimate both maximum displacement and maximum inertia force of bilinear hysteretic system subjected to earthquake motions, an equivalent linearization approach with new effective parameters is presented. Effective mass and effective damping ratio as pair of effective parameters instead of the effective period and effective damping ratio in existing equivalent linear systems are introduced. Two error measures for displacement and inertia force are defined. Error distributions over a two-dimensional parameter space of effective parameters are analysed, and the parameters are determined through a statistical approach with a dual optimization criterion for displacement and inertia... 

Acidizing of carbonate oil-wet rocks saturated with oil and saline formation water is subjected failure in some cases due to acid-induced damage such as sludge and emulsion formations. This condition may also lead to mineral precipitation, oil film barrier between acid and rock and diversion chemical malfunctions. Therefore, pre-flush process has been proposed as one of the most efficient stage for oil-wells matrix acidizing to reduce these challenges significantly. Besides, the pre-flush stage would result in more clean rock as the reservoir fluids are pushed back from the near wellbore regions, restoring rock wettability to more water wet state, preventing direct acid-oil contact and...