Sharif Digital Repository

Organic-inorganic halide perovskites (OIHPs) have emerged as a promising semiconductor for the fabrication of efficient optoelectronic devices such as photodetectors (PDs). Among all the perovskite compositions, the mixed-halide MAPb(BrxI1-x)3 formulations have gained more attention for photodetection application thanks to their tunable optoelectronic properties and great stability. However, there is still a lack of sufficient understanding of the effect of Br doping on the stability and physical properties of MAPb(BrxI1-x)3 based PDs. In this work, we prepare a series of MAPb(BrxI1-x)3 (x = 0, 0.04, 0.08, 0.12, and 0.16) single crystals (SCs) and investigate the influence of the Br content... 

We propose an unprecedented transmit-array configuration which can mold the incident beam by modulating phase and amplitude wavefronts. The transmit-array is composed of patterned graphene metasurfaces as shunt admittance sheets. Thanks to the exceptional features of graphene such as tunability, thinness, low loss, and high confinement of graphene plasmons, the proposed subwavelength structure passes strict touchstones for nano-photonic and optoelectronic applications. Two flat-optics functionalities, i.e., focusing and splitting, are realized by means of the proposed configuration  

In this paper, routing properties of cube-based optoelectronic OTIS networks are explored. We show emulations of various cubical network topologies on their OTIS augmented variants, including the nD grid networks, shuffle-exchange, and de Brujin networks. An analytical performance model for OTIS-cube networks is proposed. The model is validated by means of comparison with rigorously obtained simulation results. Using this model, the performance characteristics of the OTIS-hypercube network are evaluated in view of a number of different constraints. Moreover, we compare the performance characteristics of the OTIS-hypercube with that of equivalent fully-electronic networks under various... 

In optoelectronic OTIS architectures, electrical and optical interconnects are used for local and global communication, respectively. Interesting instances of the OTIS architecture are the OTIS-hypercube and OTIS-mesh. This paper conducts a performance evaluation and comparison of these networks under different structural conditions and traffic loads. All judgments made, are based on observations from extensive simulation results of the interconnection networks. We conclude that, when the OTIS-hypercube and equivalent 2-D OTIS-mesh are compared under the constraint of equal bisection bandwidth, the performance of the OTIS-hypercube is of superior performance. We however show that the... 

In this paper an analytical formulation based on the conversion matrix approach for characterizing the oscillator noise spectra as well as the phase and amplitude noise spectra for a single-loop optoelectronic oscillator (OEO) is presented. The validity of this approach is verified by comparing our results regarding the noise spectra of the OEO against the results of two references in the literature. The first reference presents simulation results, and the second reference presents both simulation and measurement results, and good agreement is seen between the results of the new method and those of the references. The advantage of the new approach is the simplicity of the theory as well as... 

We use a nonlinear analytic approach to predict the main oscillation mode power and spurious levels in ultrapure microwave optoelectronic oscillators (OEOs). This approach takes into account N simultaneously mode falling inside the RF filter bandwidth and calculates all the dominant InterModulation Products (IMPs) that fall in the fundamental zone. We show that nonlinear microwave photonic links exhibit the capture effect. By considering this effect, we derive analytical expressions that govern the behavior of the OEOs in the steady state. We find that when the small-signal open-loop gain is increased beyond a critical value, OEOs start a multimode operation from which the spurious levels... 

We introduce the capture effect concept in microwave photonic links (MWPLs) for the first time to our knowledge. The capture effect or the small-signal suppression is the change in the amplitude ratio of the two signals between input and output of the intensity-modulation direct-detection (IMDD) MWPLs. An analytical explanation of the performance of external IMDD MWPLs due to the effects of nonlinearity combined with sum of several input sinusoidal signals is given.We have investigated the suppression of a weaker signal in these links. General analytic expression for the small-signal suppression is derived using a nonlinear analytical approach. We show that the small-signal suppression is... 

The Goos-Haenchen shift of a totally reflected beam at the planar interface of two dielectric media, as if the incident beam is reflected from beneath the interface between the incident and transmitted media, has been geometrically associated with the penetration of the incident photons in the less-dense forbidden transmission region. This geometrical approach is here generalized to analytically calculate the Goos-Haenchen shift in one- and two-dimensional periodic structures. Several numerical examples are presented, and the obtained results are successfully tested against the well-known Artman's formula. The proposed approach is shown to be a fast, simple, and efficient method that can... 

In this paper, an analytical performance model for adaptive wormhole routing in the hypercube-based optical transpose interconnection system (OTIS-hypercube) is proposed and validated. Using this model, the performance merits of the OTIS-hypercube are discussed. We also compare the performance of the OTIS-hypercube with that of equivalent hypercube network under different implementation constraints. Compared to pure simulation results, the presented model can serve as a more appropriate and compact method to display the performance characteristics of OTIS-hypercube networks. © 2007 Elsevier Inc. All rights reserved  

We have performed a numerical solution for band structure of an Abrikosov vortex lattice in type-11 superconductors forming a periodic array in two dimensions for applications of incorporating the photonic crystals concept into superconducting materials with possibilities for optical electronics. The implemented numerical method is based on the extensive numerical solution of the Ginzburg-Landau equation for calculating the parameters of the two-fluid model and obtaining the band structure from the permittivity, which depends on the above parameters and the frequency. This is while the characteristics of such crystals highly vary with an externally applied static normal magnetic field,... 

Many authors simply use band structure of infinite photonic crystals to predict the beam's direction in a finite structure. The validity of this approximation for high frequencies has been questioned by Felbacq (PRL 92, 193902) and instead a dressed (by evanescent waves) transfer matrix has been suggested. In this work, we show through numerical examples that the direction obtained by conventional band structure is more accurate than that of dressed transfer matrix of Felbacq et. al. We also demonstrate that this approximation can be improved by taking the effect of evanescent Bloch modes into consideration. The effect of these modes leads to a constant shift of beam's center inside and far... 

Three-dimensional TiO2 nanostructures take advantages of large surface area and superior light-harvesting efficiency, as well as appropriate charge carrier transport and separation features. Here in this research, we report for the first time on measurement of density of localized trap states in three-dimensional TiO2 nanostructures with various morphologies. Bare 1-dimensional TiO2 nanofibers have been synthesized via two different methods: electrospinning and hydrothermal processes. The surface of TiO2 nanofibrous has been modified with nanoparticles and nanobranches thorough second hydrothermal process. Various morphologies of nanostructured TiO2 have been fabricated including... 

In this work, a novel and facile synthesis process to fabricate single crystalline organometal halide perovskite nanowires has been successfully developed. Nanowires were grown in a high density ordered array from metal nanoclusters inside anodic aluminum oxide templates using a non-catalytic chemical vapor deposition method. Specifically, perovskite NWs were grown as a result of the reaction between methylammonium iodide (MAI) and the Pb/Sn (Pb or Sn) metal in anodic aluminum oxide templates under optimal conditions. The characterization results show that there is a reaction zone at the interface between the perovskite material and metal, at the bottom of the anodic aluminum oxide... 

Motion estimation (ME) is one of the key parts of video compression algorithms. But, motion estimation and computation of motion vectors (MVs) are very time con-suming. In this paper, we propose a method for reducing the cost of motion estimation process. During this process, a series of candidate blocks should be searched to find the best motion vectors. In our method, we compare the skin parts of two blocks before comparing all pixel pairs of the two blocks. Having a preprocessing phase, the skin part comparison is performed quickly. This method provides a parameter that can be used to create a balance between the processing time and the motion estimation accuracy. © 2009 IEEE  

We propose a novel multi-parallel layer DCN architecture based on low radix FOS. Results show cost and power consumption reduction of 4 parallel-layer architecture is 60% and 26.7% with respect to the FatTree. © 2019 The Institute of Electronics, Information and Communication Engineers (IEICE)  

Transparent Conductive Electrode (TCE), as an essential part of the optoelectronic devices, has become popular owing to its unique properties such as high optical transmittance and conductivity. Among utilized materials for fabrication of TCE, copper nanofibers (NFs)-network have been attracting much attention due to its extraordinary properties such as low sheet resistance, the scalable manufacturing and low-cost fabrication method. However, many challenges exist in the way of multi-step fabrication of network to increase the NFs continuity and consequently, improvement of their electrical conductivity as TCE. Herein, we report a deep investigation of the effective parameters on diameter... 

Transparent Conductive Electrode (TCE), as an essential part of the optoelectronic devices, has become popular owing to its unique properties such as high optical transmittance and conductivity. Among utilized materials for fabrication of TCE, copper nanofibers (NFs)-network have been attracting much attention due to its extraordinary properties such as low sheet resistance, the scalable manufacturing and low-cost fabrication method. However, many challenges exist in the way of multi-step fabrication of network to increase the NFs continuity and consequently, improvement of their electrical conductivity as TCE. Herein, we report a deep investigation of the effective parameters on diameter... 

Fabrication of high quality zinc oxide thin films and analysis on its physical, chemical properties have applications in opto-electronic devices, UV laser, microelectronics and micro-machining schemes. Highly textured ZnO thin film with a preferred (0 0 2) orientation was prepared by two-stage chemical deposition (TSCD) using an aqueous solution containing zinc complex on a soda-lime glass substrate. From the results obtained, it can be shown that the preferred orientations of the film microcrystal changes with the doping process. The film was characterized by X-ray diffraction (XRD), SEM, EDAX, optical technique, Fourier transform infrared spectroscopy (FTIR) in order to qualify its... 

Enhancing the photoresponse of single-layered semiconductor materials is a challenge for high-performance photodetectors due to atomically thickness and limited quantum efficiency of these devices. Band engineering in heterostructure of transition metal chalcogenides (TMDs) can sort out part of this challenge. Here, we address this issue by utilizing the plasmonics phenomenon to enrich the optoelectronics property of the WSe2/MoS2 heterojunction and further enhancement of photoresponse. The introduced approach presents a contamination-free, tunable and efficient way to improve light interactions with heterojunction devices. The results showed a 3600-fold enhancement in photoresponsivity and... 

This article presents the variation of structural, electronic, thermal and optical properties of a halide perovskite CsYbBr3with increasing pressure, employing density functional theory. The pressure effect was determined in range of 0-15 GPa. In which stability of CsYbBr3remains valid, as, verified from negative values of enthalpy of formation and phonon dispersion curves. A significant change was observed in lattice constant, bond lengths, bulk modulus and its pressure derivative, volume and ground state energy, with increasing pressure. The calculated electronic properties presented CsYbBr3as a semiconductor with direct band gap of 3.61 eV. However, pressure rise shift the Yb-d states...