Loading...
Search for: particle-agglomerates
0.005 seconds

    Mechanical and microstructural properties of cement paste incorporating nano silica particles with various specific surface areas

    , Article Key Engineering Materials, 8 July 2010 through 9 July 2010 ; Volume 478 , July , 2011 , Pages 19-24 ; 10139826 (ISSN) ; 9783037851357 (ISBN) Khaloo, A. R ; Vayghan, A. G ; Bolhasani, M ; Sharif University of Technology
    2011
    Abstract
    In this study, the effect of agglomeration and non-uniform dispersion of silica particles on the mechanical and microstructural properties of cement paste incorporating silica fume and nanosilica (NS) with various specific surface areas (SSA) is experimentally investigated. The SSA and replacement percent of silica particles were considered as test variables and four series of mixes were made including one set of mixes for silica fume with a SSA of 20 m2/g and three sets of mixes for three different types of NS with SSA equal to 90, 200 and 380 m2/g. In each series of mix designs three different cement replacement percents of 1.5%, 3% and 5% were applied. The results indicate that as the SSA... 

    Submicron particle deposition in pulmonary alveoli during cyclic breathing

    , Article Scientia Iranica ; Volume 24, Issue 4 , 2017 , Pages 1975-1984 ; 10263098 (ISSN) Monjezi, M ; Saidi, M. S ; Ahmadi, G ; Sharif University of Technology
    Sharif University of Technology  2017
    Abstract
    The prediction of deposition efficiency of submicron particles in the pulmonary alveoli has received special attention due to its importance for drug delivery systems and for assessing air pollutants health risks. In this work, the pulmonary alveoli of a healthy human are idealized by a three-dimensional honeycomb-like configuration and a fluid-structure interaction analysis is performed. In contrast to previous works in which the inlet flow rate is predefined, in this model, a negative pressure is imposed on the outside surface of the flalveolus which causes air to flow in and out of the alveolus. The resulting flow patterns confirmed that there was no circulation in the terminal alveolus.... 

    Shape-controlled silver NPs for shape-dependent biological activities

    , Article Micro and Nano Letters ; Volume 12, Issue 9 , 2017 , Pages 647-651 ; 17500443 (ISSN) Sadeghi, F ; Yazdanpanah, A ; Abrishamkar, A ; Moztarzadeh, F ; Ramedani, A ; Pouraghaie, S ; Shirinzadeh, H ; Samadikuchaksaraei, A ; Chauhan, N. P. S ; Hopkinson, L ; Sefat, F ; Mozafari, M ; Sharif University of Technology
    Abstract
    The most important issue during synthesis of nanoparticles (NPs) is to avoid particle agglomeration and adhesion. There have been several attempts to use special substances such as organic surfactants, polymers and stable ligands for this purpose. In this study, silver NPs were synthesised with and without gelatin macromolecules, as a green natural biopolymer, which resulted in NPs with varying shapes and sizes. The effect of morphological characteristics on the antibacterial and antifungal properties of the synthesised NPs were studied, by comparing Gram-negative (Escherichia coli) versus Gram-positive (Staphylococcus aureus) bacteria as well as fungi (Candida albicans) by calculation of... 

    Effects of surface modified nanosilica on drilling fluid and formation damage

    , Article Journal of Petroleum Science and Engineering ; Volume 194 , 2020 Hajiabadi, S. H ; Bedrikovetsky, P ; Mahani, H ; Khoshsima, A ; Aghaei, H ; Kalateh Aghamohammadi, M ; Habibi, S ; Sharif University of Technology
    Elsevier B.V  2020
    Abstract
    Despite the fact that hydrophobic nanosilica can improve the stability of water/oil emulsion, there exist controversies pertaining to its influence on oil-based drilling fluid rheological behavior and the subsequent formation damage. The present study addresses the above using a surface modified nanosilica, where the particles were functionalized with different silane-based groups to alter their hydrophilicity: 3-glycidoxypropyl-triethoxy silane (GPTS) and combined GPTS and propyl silane (PGPTS). The NPs were characterized through FTIR analysis, particle size, and zeta-potential measurements followed by flow behavior experiments, core-scale mud flow tests, Computed Tomography (CT) scanning...