Sharif Digital Repository

Continuous adsorption in stirred reactors in the form of carbon in pulp (CIP) and resin in pulp (RIP) is an established process for the extraction of gold and uranium. Under the circumstance of intraparticle diffusion resistance, CIP and RIP have been accurately modeled by the Boyd's series (reversible adsorption) and shrinking core model (irreversible adsorption). The present study, in its first part, introduces an analytical formula that most closely approximates both models. Using such formula, the study addresses a basic algorithm for optimization of single-stage continuous adsorption systems through linking of the major process variables. Furthermore, this study is devoted to developing... 

Sorption capacity as well as sorption kinetics of oil onto four different expanded perlites with different physical and surface properties were studied. In order to meticulously measure the amount of oil to be sorbed onto the adsorbents used in this study both static and dynamic methods were employed. It would be worth noting that the adsorbent, i.e., perlite can spread on the oil and float on the surface thanks to its low density. The variation of the amount of oil sorbed onto the adsorbents with time was recorded and the weight of adsorbent was monitored at each specified time. The experimental results showed that grain sizes with high surface area can sorb oil to be spread on water... 

In order to improve the performance of thin film devices, it is necessary to characterize their mechanical, as well as electrical, properties. In this work, a model is developed for analysis of the mechanical and electrical properties and the prediction of residual stresses in thin films of silver nanoparticles deposited on silicon substrates. The model is based on inter-particle diffusion modeling and finite element analysis. Through simulation of the sintering process, it is shown how the geometry, density, and electrical resistance of the thin film layers are changed by sintering conditions. The model is also used to approximate the values of Young's modulus and the generated residual... 

In this study, kinetics, equilibrium, and mechanisms of SDBS adsorption onto carbonate rock in presence/absence of alkaline/electrolyte, which is not well discussed in the available literature, is analyzed through batch experiments. Analysis of kinetic data showed that adsorption rate of SDBS onto carbonate is controlled by both boundary layer and intraparticle diffusion, also adsorption kinetics meets pseudo second-order model. The coefficient of kinetic model is a linear function of initial and equilibrium concentrations. The adsorption isotherm experiences four distinct regions, with a rising trend in the first regions until reaching to a maximum after which decreases slightly, as the... 

In this study, kinetics, equilibrium, and mechanisms of SDBS adsorption onto carbonate rock in presence/absence of alkaline/electrolyte, which is not well discussed in the available literature, is analyzed through batch experiments. Analysis of kinetic data showed that adsorption rate of SDBS onto carbonate is controlled by both boundary layer and intraparticle diffusion, also adsorption kinetics meets pseudo second-order model. The coefficient of kinetic model is a linear function of initial and equilibrium concentrations. The adsorption isotherm experiences four distinct regions, with a rising trend in the first regions until reaching to a maximum after which decreases slightly, as the... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Fluid particle diffusion through blood flow within a capillary tube is an important phenomenon to understand, especially for studies in mass transport in the microcirculation as well as in solving technical issues involved in mixing in biomedical microdevices. In this paper, the spreading of tracer particles through up to 20% hematocrit blood, flowing in a capillary tube, was studied using a confocal micro-PTV system. We tracked hundreds of particles in high-hematocrit blood and measured the radial dispersion coefficient. Results yielded significant enhancement of the particle diffusion, due to a micron-scale flow-field generated by red blood cell motions. By increasing the flow rate, the... 

This paper concerns with the interfacial tension (IFT), wettability modification and adsorption behavior of a new plant-based surface active agent, Zizyphus Spina Christi, onto sandstone minerals which has been rarely attended in the available literature. Both kinetics and equilibrium adsorption data were obtained from batch mode tests. It was revealed that Freundlich isotherms matched better fit to the equilibrium data which implied that multilayer coverage of Zizyphus Spina Christi onto the sandstone particle surfaces was more likely to occur. Analysis of experimental kinetic data based on intraparticle diffusion model disclosed that the intraparticle diffusion mechanism is not the only... 

In the present study, dual layers mixed matrix membranes (MMMs) were prepared by incorporating aminated-Fe3O4 nanoparticles into the chitosan/polyvinyl alcohol nanofibers over the polyethersulfone (PES) membrane for the removal of Cr(VI) and Pb(II) ions in batch adsorption and membrane processes. The synthesized aminated-Fe3O4 nanoparticles were characterized using XRD, FESEM and FTIR analysis. The morphology and roughness of membranes were determined using SEM, TEM and AFM analysis. The effect of adsorption operating parameters such as pH (2–7), contact time (0–60 min), initial concentration of metal ions (20–1000 mgL−1) and temperature (30–50 °C) on the Cr(VI) and Pb(II) ions sorption was... 

Kinetics and isotherms of adsorption behavior of nanoscale Zr-based metal-organic framework for the removal of three organic dyes including acidic, direct and basic ones from aqueous solutions were studied by sorption models. Nanocube-shaped UiO-66 particles with an average edge length of 215 nm, specific surface area of 1215 m2/g, total pore volume of 0.58 cm3/g, and average pore diameter of 1.8 nm were prepared by solvothermal methods. Analyzing of the equilibrium isotherms indicates that direct dye removal is best fitted with the Langmuir isotherm. Study of the adsorption kinetics also determines that direct dye adsorption follows pseudo-first-order model (R2=0.99). The kinetics of basic... 

In this study, some new aspects of adsorption of a fluorochemical onto carbonate rocks as a wettability alteration agent to a gas wetting condition with the potential application for reduction of condensate blockage in gas condensate reservoirs are presented. To achieve this, kinetics, equilibrium, and thermodynamic of the adsorption process besides contact angle, imbibition, and characterization tests are investigated. Results of adsorption experiments revealed that kinetics behavior of the utilized fluorochemical–calcite system obeyed the pseudo-second order kinetics model. There was no change in adsorption after about 20 h. Also, the intraparticle diffusion mechanism was not the only rate... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Catechins from fresh green tea leaves as potential sources of anticancer and antioxidant components were target materials in this work. Superheated water extraction, which is a kind of leaching operation, and solvent partition with chloroform and ethyl acetate were utilized to recover Catechins from tea leaves. Then, a mathematical model was developed to simulate the superheated water extraction of Catechins. The unsteady state mass balance of the solute in solid and superheated water phases led to two partial differential equations. The model was solved numerically using a linear equilibrium relationship. The model parameters were predicted applying existing experimental correlations. An...