Sharif Digital Repository

TiO2 nanoparticles (NPs) were synthesized by hydrothermal assisted sol-gel technique. In the next step, as-synthesized NPs were modified by poly ethylene glycol (PEG). Then, folic acid (FA) was conjugated to TiO 2-PEG. Finally, Doxorubicin (Dox) as an anticancer drug was loaded on as-prepared TiO2-PEG-FA nanocarrier. The optimization of TiO 2 and FA concentration and the influence of ultraviolet (UV) irradiation on photocatalytic activity of nanocarrier and Dox loaded carrier were assessed by utilizing the 3-(4,5-dimethylthiazol-2yl)-2,5- diphenyltetrazolium bromide (MTT)-assay method. Results indicated that the effect of NPs on cancer cells killing is dose-dependent, optimized at 1.25 g/L.... 

We report a simple and inexpensive synthesis route of TiO2 nanoparticles using electrical arc discharge between titanium electrodes in oxygen bubbled deionized (DI) water followed by heat treatment. The resulting nanoparticles were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD patterns demonstrate formation of TiO2 phase in oxygen bubbled water after heat treatment and dominance of rutile to anatase phase. The size and morphology of TiO2 nanoparticles were studied using different arc currents as a crucial parameter in properties of final... 

Herein, we report the preparation of SnS2 nanoflakes decorated with bismuth ferrite (BiFeO3) nanoparticles and reduced graphene oxide (rGO) nanosheets. The crystal structures and morphology results of composite indicated that spherical BiFeO3 nanoparticles were homogeneously attached onto the surface of SnS2 nanoflakes with the decoration of rGO sheets. The optimized photocatalyst, i.e. SnS2 (1.5)-BiFeO3/rGO (0.15) composite not only exhibites the highest photocatalytic performance for the degradation of methylene blue (MB) and Methyl orange (MO) as model reaction under visible light illumination among the individual SnS2 and BiFeO3 photocatalysts but also retains the stable photodegradation... 

Nanostructured aluminum titanate (AT) was synthesized by the sol-gel method. The calcination temperature was selected as a processing variable to obtain different phase ratios of AT and its parent phases i.e. TiO2 and Al2O3. The main aim behind the present work was to cast light on the photocatalytic performance of AT-based nanocomposites and evaluate their capability to serve as a novel photocatalyst. X-ray diffraction (XRD) analysis and field-emission scanning electron microscopy (FE-SEM) studies were conducted to evaluate the microstructure-sensitive properties of the synthesized powders. Diffuse reflectance spectroscopy (DRS) and the methylene blue degradation test were carried out to... 

ZnO/gC 3 N 4 hybrid nanofibers containing different concentrations of gC 3 N 4 nanosheets were prepared using electrospinning technique; this was followed by annealing at 460 forC for one hour in a box furnace. Based on scanning electron microscopy (SEM) image analysis, the mean diameter of the nanofibers was measured to be ~ 55 nm. Fourier transform infrared (FTIR) spectroscopy confirmed the presence of ZnO and gC 3 N 4 in the prepared nanofibers. The photocatalytic activity of the nanofibers was examined under UV photoirradiation, showing that the ZCN0.5 nanofibers containing 0.5 wt% of gC 3 N 4exhibited the highest performance, as compared to other photocatalysts. The observed improvement... 

To enhance hydrophilicity and photocatalytic activity, N-doped and N–V-codoped TiO2films were coated on glass substrates by the sol–gel dip-coating method. The substrates were previously coated with SiO2using the same method. The coated samples, after annealing at 450 °C for 30 min in air, were analyzed by an X-ray diffractometer, scanning electron microscope, Fourier transform infrared spectroscope, X-ray photoelectron spectroscope, and UV–visible spectroscope. The SiO2/N–V-codoped TiO2photocatalyst showed a narrower band gap (2.93 eV) compared to the SiO2/N-doped. Degradation tests, methyl orange under UV light and stearic acid under visible light, were performed in order to evaluate... 

The fabrication of strong photocatalysts applied to the degradation of organic pollutants is necessary in environmental applications. In a single-stage method, acetate precursor and poly vinyl pyrolydine are used to produce ZnO nanostructures with various morphologies in annealing temperatures ranging from 300 to 900 °C. The physical properties of the prepared nanostructures were characterized by SEM, TEM, XRD, BET, DRS, CHN analysis and PL spectroscopy. The SEM images exhibit a variety of the as-prepared hexagonal zinc oxides including wires, rods, particles and porous network of welded particles of ZnO nanoparticles. The results of the photocatalytic degradation of methylene blue as an... 

Annealed and wrought AA5052 aluminum alloy was subjected to friction stir processing (FSP) without and with 3 vol pct TiO2 nanoparticles. Microstructural studies by electron backscattered diffraction and transmission electron microscopy showed the formation of an ultra-fine-grained structure with fine distribution of TiO2 nanoparticles in the metal matrix. Nanometric Al3Ti and MgO particles were also observed, revealing in-situ solid-state reactions between Al and Mg with TiO2. Tensile testing at different strain rates determined that FSP decreased the strain rate sensitivity and work hardening of annealed Al-Mg alloy without and with TiO2 nanoparticles, while opposite results were obtained... 

We synthesize TiO2@SnO2 core-shell nanoparticles (NPs) by a facile two-step aqueous sol-gel method and their photocatalytic activity is compared with the pure TiO2 and SnO2 NPs for degradation of methylene blue under UV irradiation. The chemical property, crystal structure and morphology of the synthesized samples are studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM) and transmission electron microscope (TEM) techniques. The mechanisms of electron–hole recombination and separation of charge carriers are studied by photoluminescence (PL) and diffuse reflectance spectroscopy (DRS). Furthermore, the kinetics... 

Decorating photocatalysts with noble metal nanoparticles (e.g., Pt) often increases the catalysts’ photocatalytic activity and biomedical properties. Here, a simple and inexpensive method has been developed to prepare a Pt-Ag3PO4/CdS/chitosan composite, which was characterized and used for the visible light-induced photocatalytic and antibacterial studies. This synthesized composite showed superior photocatalytic activity for methylene blue degradation as a hazardous pollutant (the maximum dye degradation was observed in 90 min of treatment) and killing of Gram positive bacterial (Staphylococcus aureus and Bacillus cereus) as well as Gram negative bacteria (Klebsiella pneumoniae, Salmonella... 

Titanium dioxide (TiO2) and Cu-doped TiO2 (Cu–TiO2) were synthesized using a sol-gel method and used as nanofillers to prepare CMC-based functional packaging films. The Cu–TiO2 was spherical particles with a size range of 66.1 ± 9.0 nm TiO2 and Cu–TiO2 nanoparticles had good compatibility with CMC and were evenly distributed in the CMC polymer matrix to form a composite film. The TiO2-added film did not show significant antibacterial activity, but the Cu–TiO2-added film exhibited high antibacterial activity against foodborne pathogenic bacteria (L. monocytogenes and E. coli) under visible light. When bananas were packaged with the CMC-based films, the CMC/Cu–TiO2 film effectively delayed the... 

Visible light-active BiOCl/BiVO4/mordenite and Ag/BiOCl/BiVO4 nanocomposite with a p–n heterojunction structure were prepared. Mordenite nanocrystals were synthesised using the hydrothermal method. Deposition and reduction methods were utilised to modify the Zeolite surface. The photocatalytic activities of the heterojunctions were investigated by scanning the change of Acid blue 92 (AB92) concentration under visible irradiation. The nanocomposites demonstrated improved efficiency for dye photodegradation. The activities are due to strong oxidative ability and efficient charge separation and transfer through the BiOCl/BiVO4 p–n junction. The photogenerated electron-holes react with species... 

RGO/Ag/TiO2-nanotubes/Ti plates with high photocatalytic activity were fabricated via electrochemical reduction of graphene oxide on Ag/TiO2-nanotubes. The loading of silver nanoparticles was carried out by electroless reduction of Ag1+ onto TiO2 nanotubes previously formed by anodizing titanium. Microstructure studies show that reduced graphene oxide (RGO) layers having high surface area have been deposited on the as-prepared Ag/TiO2-nanotubes, where nanoparticles of Ag had grown on the walls of TiO2-nanotubes. The results of photocatalytic experiments demonstrate that the RGO/Ag/TiO2-nanotubes/Ti plate exhibits significantly enhanced photocatalytic activity for the photocatalytic... 

Visible light-active BiOCl/BiVO4/mordenite and Ag/BiOCl/BiVO4 nanocomposite with a p–n heterojunction structure were prepared. Mordenite nanocrystals were synthesised using the hydrothermal method. Deposition and reduction methods were utilised to modify the Zeolite surface. The photocatalytic activities of the heterojunctions were investigated by scanning the change of Acid blue 92 (AB92) concentration under visible irradiation. The nanocomposites demonstrated improved efficiency for dye photodegradation. The activities are due to strong oxidative ability and efficient charge separation and transfer through the BiOCl/BiVO4 p–n junction. The photogenerated electron-holes react with species...