Loading...
Search for: photoluminescence-measurements
0.01 seconds

    Supercritical synthesis and characterization of graphene-pbs quantum dots composite with enhanced photovoltaic properties

    , Article Industrial and Engineering Chemistry Research ; Volume 54, Issue 30 , 2015 , Pages 7382-7392 ; 08885885 (ISSN) Tayyebi, A ; Tavakoli, M. M ; Outokesh, M ; Shafiekhani, A ; Simchi, A ; Sharif University of Technology
    American Chemical Society  2015
    Abstract
    Lead sulfide quantum dots (PbS QDs) were decorated onto a graphene surface in a semi-core-shell structure using supercritical ethanol. The temperature of ethanol played significant role in controlling size and agglomeration of QDs as well as the extent of reduction of graphene. Average size of the QDs was estimated by transmission electron microscopy to be around 3.96 nm and by quantum models to be about 4.34 nm. PbS QDs prepared at 330 °C were of high purity, and the yield was 99%. Instrumental and chemical analyses demonstrated formation of a strong bond between PbS QDs and graphene, through a Pb-O-C bridge. UV and photoluminescence measurements along with theoretical considerations... 

    Room temperature H2S gas sensor based on rather aligned ZnO nanorods with flower-like structures

    , Article Sensors and Actuators, B: Chemical ; Volume 207,Issue PartA , February , 2015 , Pages 865-871 ; 09254005 (ISSN) Hosseini, Z. S ; Zad, A. I ; Mortezaali, A ; Sharif University of Technology
    Elsevier  2015
    Abstract
    Rather vertically aligned ZnO rods with flower-like structures were grown on quartz substrates through vapor phase transport method. X-ray diffraction (XRD) analysis and photoluminescence (PL) measurement were performed to determine crystalline structure and defects, respectively. H2S gas sensing properties of the grown structure were investigated at both room temperature and 250 °C for comparison. A remarkable increase in response and selectivity at room temperature compared to 250 °C was observed. High response and selectivity to low concentrations of H2S at room temperature as well as good stability make the sensor a promising candidate for practical applications  

    Structural, magnetic, and optical properties of zinc-and copper-substituted nickel ferrite nanocrystals

    , Article Journal of Superconductivity and Novel Magnetism ; Volume 25, Issue 7 , 2012 , Pages 2443-2455 ; 15571939 (ISSN) Tehrani, F. S ; Daadmehr, V ; Rezakhani, A. T ; Akbarnejad, R. H ; Gholipour, S ; Sharif University of Technology
    Springer  2012
    Abstract
    Ferrite nanocrystals are an interesting material due to their rich physical properties. Here we add nonmagnetic dopants Zn and Cu to nickel ferrite nanocrystals, Ni1-xMxFe2O4 (0 ≤ x ≤ 1, M = Cu, Zn), and study how relevant properties of the samples are modified accordingly. Basically, these dopings cause a rearrangement of Fe +3 ions into the two preexisting octahedral and tetrahedral sites. In fact, this, we show, induces pertinent magnetic properties of the doped samples. In the case of the Cu-doping, the Jahn-Teller effect also emerges, which we identify through the Fourier Transform Infra-Red Spectroscopy of the samples. Moreover, we show an increase in the lattice parameters of the... 

    Surface engineering of pbs colloidal quantum dots using atomic passivation for photovoltaic applications

    , Article 8th International Conference on Materials for Advanced Technologies, 28 June 2015 through 3 July 2015 ; Volume 139 , 2016 , Pages 117-122 ; 18777058 (ISSN) Tavakoli, M. M ; Sharif University of Technology
    Elsevier Ltd 
    Abstract
    Solution-processed quantum dots (QDs) have attracted significant attention for the low-cost fabrication of optoelectronic devices. Here, we synthesized PbS QDs via hot injection method and passivated the trap states by using short thiols and dopant elements for photovoltaic application. In order to study the effect of dopants on photovoltaic application, PbS QDs were doped by using three different cations: Cadmium, Calcium, and Zinc. We utilized Time resolvel Photoluminescence measurement to study the carriers lifetime for different samples and found that the carriers life time increases ∼80% by using Cd as a dopant compared with undoped sample. In addition, the results of J-V measurement... 

    Fast two-step microwave-activated synthesis of Mn doped ZnS nanocrystals: Comparison of the luminescence and doping process with thermochemical approach

    , Article Journal of Luminescence ; Volume 131, Issue 4 , April , 2011 , Pages 721-726 ; 00222313 (ISSN) Marandi, M ; Hajisalem, G ; Taghavinia, N ; Houshiar, M ; Sharif University of Technology
    2011
    Abstract
    In this work we report a fast two-step microwave activated synthesis of the ZnS:Mn nanocrystals. Zn(NO3)2 and Na2S 2O3 were used as the precursors and Mn(NO 3)2 was employed as the source of the impurity. The aqueous synthesis was based on the heat sensitivity of Na2S 2O3, which releases some S species on heating. Consequently, the reaction was well activated under microwave irradiation resulting in formation of ZnS:Mn nanocrystals. Thioglycerol (TG) was also used as the capping agent and the catalyst of the reaction. The synthesis process was done in two steps, i.e. 1 min irradiation without TG and then injection of TG and continuation of irradiation. ZnS:Mn nanocrystals were quickly formed... 

    Combustion synthesis of g-C3N4/Fe2O3 nanocomposite for superior photoelectrochemical catalytic performance

    , Article Applied Surface Science ; Volume 534 , 2020 Ghane, N ; Sadrnezhaad, S. K ; Hosseini H., S. M ; Sharif University of Technology
    Elsevier B.V  2020
    Abstract
    The g-C3N4/Fe2O3 nanocomposite was produced by the solution combustion synthesis (SCS) of iron-nitrate/g-C3N4 mixtures of varying concentration ratios and using urea as a fuel. The following methods did characterization of the products: X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller investigation (BET), ultraviolet–visible light analysis (UV–vis) and photoluminescence measurement (PL). Effect of iron nitrate on stability and photocurrent density under simulated visible-light irradiation was determined. The...