Loading...
Search for: pm10
0.005 seconds

    Statistical modeling approaches for pm10 prediction in urban areas; A review of 21st-century studies

    , Article Atmosphere ; Volume 7, Issue 2 , 2016 ; 20734433 (ISSN) Taheri Shahraiyni , H ; Sodoudi, S ; Sharif University of Technology
    MDPI AG  2016
    Abstract
    PM10 prediction has attracted special legislative and scientific attention due to its harmful effects on human health. Statistical techniques have the potential for high-accuracy PM10 prediction and accordingly, previous studies on statistical methods for temporal, spatial and spatio-temporal prediction of PM10 are reviewed and discussed in this paper. A review of previous studies demonstrates that Support Vector Machines, Artificial Neural Networks and hybrid techniques show promise for suitable temporal PM10 prediction. A review of the spatial predictions of PM10 shows that the LUR (Land Use Regression) approach has been successfully utilized for spatial prediction of PM10 in urban areas.... 

    Impact of middle eastern dust sources on PM10 in iran: highlighting the impact of tigris-euphrates basin sources and lake urmia desiccation

    , Article Journal of Geophysical Research: Atmospheres ; Volume 121, Issue 23 , 2016 , Pages 14,018-14,034 ; 2169897X (ISSN) Sotoudeheian, S ; Salim, R ; Arhami, M ; Sharif University of Technology
    Blackwell Publishing Ltd  2016
    Abstract
    Contribution of different Middle Eastern dust origins to PM10 (PM with aerodynamic diameters less than 10 µm) levels in several receptor large cities in Iran was investigated. Initially, the major regional dust episodes were determined through statistical analysis of recorded PM levels at air quality stations and verified using satellite images. The particles dispersion was simulated by Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) to regenerate PM10 during the dust episodes. The accuracy of the modeled results was rather convincing, with an average squared correlation coefficient (R2) of 0.7 (max = 0.95). Consequently, the contributions of different dust sources to the... 

    Permissible emission limit estimation via iterative back-calculation: Case of Assaluyeh energy zone, southern Iran

    , Article Integrated Environmental Assessment and Management ; Volume 14, Issue 1 , 2018 , Pages 130-138 ; 15513793 (ISSN) Khajehpour, H ; Saboohi, Y ; Tsatsaronis, G ; Sharif University of Technology
    Wiley-Blackwell  2018
    Abstract
    In the present research work, an environmental policy procedure for setting a cap on emissions, as a crucial step in any total emission control system, has been provided and evaluated. It is shown that general regulations on emission intensities and rates do not guarantee that ambient air quality standards are met in intense industrial zones. Local emission limits are necessary to meet ambient air quality standards in these zones. To that end, we used dispersion simulators to back-calculate pollutant concentration thresholds for a large and intense energy system in the Assaluyeh region of southern Iran. Verified modeling results indicate 218 d of pollutant concentration threshold exceedance... 

    Estimating urban ground-level PM10 using MODIS 3km AOD product and meteorological parameters from WRF model

    , Article Atmospheric Environment ; Volume 141 , 2016 , Pages 333-346 ; 13522310 (ISSN) Ghotbi, S ; Sotoudeheian, S ; Arhami, M ; Sharif University of Technology
    Elsevier Ltd  2016
    Abstract
    Satellite remote sensing products of AOD from MODIS along with appropriate meteorological parameters were used to develop statistical models and estimate ground-level PM10. Most of previous studies obtained meteorological data from synoptic weather stations, with rather sparse spatial distribution, and used it along with 10 km AOD product to develop statistical models, applicable for PM variations in regional scale (resolution of ≥10 km). In the current study, meteorological parameters were simulated with 3 km resolution using WRF model and used along with the rather new 3 km AOD product (launched in 2014). The resulting PM statistical models were assessed for a polluted and largely variable... 

    Contribution of the Middle Eastern dust source areas to PM10 levels in urban receptors: Case study of Tehran, Iran

    , Article Atmospheric Environment ; Volume 75 , 2013 , Pages 287-295 ; 13522310 (ISSN) Givehchi, R ; Arhami, M ; Tajrishy, M ; Sharif University of Technology
    2013
    Abstract
    The origins and evolution of the Middle Eastern dust storms which frequently impact the residents of this arid region were studied. A methodology was adapted and developed to identify the desert regions of potential dust sources and determine their contributions to PM10 concentrations in the highly-populated receptor city of Tehran, Iran. Initially, the episodes of regional dust intrusion and the resulting amounts of increase in the particulate concentrations during these episodes were determined using a statistical analyzing methodology. The dust episodes were also inspected with the aerosol index information from the Ozone Monitoring Instrument (OMI). The Hybrid Single-Particle Lagrangian... 

    Dust concentration over a semi-arid region: parametric study and establishment of new empirical models

    , Article Atmospheric Research ; Volume 243 , 1 October , 2020 Najafpour, N ; Afshin, H ; Firoozabadi, B ; Sharif University of Technology
    Elsevier Ltd  2020
    Abstract
    In recent years, the city of Tehran, Iran's capital, has encountered numerous dust events so that the dust concentration of PM10 has reached even more than 800 μg m−3. This emphasizes the importance of the statistical study of dust in Tehran and the development of correlations for estimating dust concentration of PM10. In the present study, by evaluating the data measured during dust observations over the years 2013–2016 in Tehran, new statistical models are established for estimating PM10 concentration in terms of horizontal visibility and MODIS AOD. Firstly, simple nonlinear regression models between dust concentration of PM10 and horizontal visibility as well as MODIS AOD are developed.... 

    Evaluating near highway air pollutant levels and estimating emission factors: Case study of Tehran, Iran

    , Article Science of the Total Environment ; Volume 538 , December , 2015 , Pages 375-384 ; 00489697 (ISSN) Nayeb Yazdi, M ; Delavarrafiee, M ; Arhami, M ; Sharif University of Technology
    Elsevier  2015
    Abstract
    A field sampling campaign was implemented to evaluate the variation in air pollutants levels near a highway in Tehran, Iran (Hemmat highway). The field measurements were used to estimate road link-based emission factors for average vehicle fleet. These factors were compared with results of an in tunnel measurement campaign (in Resalat tunnel). Roadside and in-tunnel measurements of carbon monoxide (CO) and size-fractionated particulate matter (PM) were conducted during the field campaign. The concentration gradient diagrams showed exponential decay, which represented a substantial decay, more than 50-80%, in air pollutants level in a distance between 100 and 150meters (m) of the highway. The... 

    Re-construction of the shut-down PM10 monitoring stations for the reliable assessment of PM10 in Berlin using fuzzy modelling and data transformation

    , Article Environmental Monitoring and Assessment ; Volume 189, Issue 3 , 2017 ; 01676369 (ISSN) Taheri Shahraiyni, H ; Sodoudi, S ; Kerschbaumer, A ; Cubasch, U ; Sharif University of Technology
    Springer International Publishing  2017
    Abstract
    A dense monitoring network is vital for the reliable assessment of PM10 in different parts of an urban area. In this study, a new idea is employed for the re-construction of the 20 shut-down PM10 monitoring stations of Berlin. It endeavours to find the non-linear relationship between the hourly PM10 concentration of both the still operating and the shut-down PM10 monitoring stations by using a fuzzy modelling technique, called modified active learning method (MALM). In addition, the simulations were performed by using not only raw PM10 databases but also log-transformed PM10 databases for skewness reduction. According to the results of hourly PM10 simulation (root mean square error about... 

    Characterization of ionic composition of TSP and PM10 during the Middle Eastern Dust (MED) storms in Ahvaz, Iran

    , Article Environmental Monitoring and Assessment ; Volume 184, Issue 11 , November , 2012 , Pages 6683-6692 ; 01676369 (ISSN) Shahsavani, A ; Naddafi, K ; Jaafarzadeh Haghighifard, N ; Mesdaghinia, A ; Yunesian, M ; Nabizadeh, R ; Arhami, M ; Yarahmadi, M ; Sowlat, M. H ; Ghani, M ; Jonidi Jafari, A ; Alimohamadi, M ; Motevalian, S. A ; Soleimani, Z ; Sharif University of Technology
    2012
    Abstract
    Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ∼10 μm or less (PM10) during dust storms in Ahvaz in April-September 2010. TSP and PM10 samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM10 were 1,481.5 and 1,072.9 μg/m 3, respectively. Particle concentrations during the Middle Eastern...