Sharif Digital Repository

In this research UHMWPE/MWCNT nanocomposites with different concentrations of nanotubes (0.5, 1.5, 2.5, 3.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Support of catalyst on MWCNT was investigated using Fourier Transform Infrared Spectroscopy (FTIR). The results confirmed interaction between catalyst and hydroxyl groups on the surface... 

Polymer blending has an important role in preparation of materials with suitable properties without synthesizing new polymers. One of these blends is polypropylene (PP)/ polyethylene (PE). PE is added for improving the impact strength and toughness of PP. For improvementof the properties, a compatibilizer is used due to incompatibility of the PP/PE blend. Improving the impact properties is usually related to the reduction in stiffness. Considering the importance of stiffness in many industrial applications, mineral fillers are employed for increasing the stiffness. In this research, the goal has been to manufacture polypropylene-based ternary composite(Polypropylene/ Polyethylene/Nanometric... 

In this research UHMWPE/FUMED SILICA nanocomposites with different concentrations of nano fumed silica (0.5, 1.5, 2.5, 4.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Fumed Silica functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Scanning Electron Microscopy (SEM) images also certified very good dispersion of fumed silica throughout PE matrix. Intrinsic viscosity measurements showed high molecular weight for... 

In this research UHMWPE/CB nanocomposites were prepared via in situ polymerization using Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and carbon black were used as supports of catalyst. TiCl4 accompanied by triisobutyl aluminum and diisobutyl phthalate (DIBP) constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Then, structural, thermal and mechanical properties of produced nanocomposites with different CB content were evaluated by SEM, DSC, TGA, DMTA and tensile tests. Scanning Electron Microscopy (SEM) images also certified very good dispersion of CBs throughout PE matrix.... 

Recently, due to the increase of environmental concerns, a significant raise in applying films and packaging containers, pollution produced from petroleum-based plastics packaging and problems arising from the various methods of waste disposal, the researchers have concentrate to replace these materials with biodegradable ones. In this study, a nanocomposite based on alloy matrix of thermoplastic starch and polyethylene which is reinforced with different amounts of Montmorillonitenanoclay has been constructed by the extrusion process. Furthermore, in order to increase the compatibility between the polar and non-polar components in the group of samples, compatibilizer was used and its... 

Polyethylene, due to its low production and maintenance costs, light weight and excellent chemical resistance, is the most widely used material for production of water and gas transfer pipes. Pipe grade polyethylene (PE100) with bimodal molecular weight distribution has excellent mechanical properties, especially long-term creep performance. In order to prevent UV degradation, carbon black is added as masterbatch to PE100 to produce black compounds, which acts as most effective industrial UV stabilizer of polyethylene. Five PE100 black compounds and one white PE100 as reference sample were produced using a twin-screw extruder. Rheological, melt flow DSC, TGA, FE-SEM and tensile tests were... 

In Lithium ion batteries, the separator is membrane that placed between the cathode and the anode is one of critical components. Its primary function is to effectively transport ionic charge carriers between two electrodes as an efficient ionic conductor as well as to prevent the electric contact between them as a good electric insulator. The separator does not involve directly in any cell reactions, but its structure and properties play an important role in determining the battery performance. Commercially available polyolefin separators low cost, good electric resistance, high electrochemical stability, and effectively prevent thermal runaway caused by the electrical short-circuits or... 

Polyethylene is the most widely used plastic material in the world for reasons such as lightweight, good strength, good processability, low cost, and low maintenance cost, and very good chemical resistance. One of the applications of polyethylene that has received much attention in recent decades is its use in the manufacture of hot water pipes. To maintain the properties of polyethylene at high temperatures, it must be crosslinked at a proper level. Appropriate antioxidants should be used to prevent the degradation and oxidation of polyethylene during the process as well as long-term operation. Concomitant use of phenolic antioxidants for long-term stability during service and phosphorus... 

Polyethylene is one of the most widely used polymers for the production of drinking water pipes. The presence of chlorine-based disinfectants in drinking water leads to long-term chemical destruction of pipes and sometimes reduces the life of pipes by half. Therefore, it is very important to investigate various factors affecting the chemical resistance of polyethylene pipes. The crystalline microstructure of the substance is affected by the average molecular weight, type and distribution comonomer on the chain, is one of the important and influential factors on the chemical resistance of these species against chlorine dioxide as a disinfectant. In this research, the chemical resistance of... 

In recent years, non-biodegradable microplastics (MPs), which cause a lot of pollution in the environment, have become a major concern worldwide. Due to their small size and large surface area, these plastic particles have a great ability to be absorbed into biological cells. Due to their hydrophobic surface, these particles have the ability to absorb pollutants such as heavy metals, toxic medicinal substances, softeners, etc. Microplastics are usually persistent in the environment, allowing them to be transported along the food chain. Research on the degradation of microplastics is focused on biological and non-biological approaches. To date, microorganisms such as algae, fungi, and...