Search for: polymeric-catalysts
Microwave-induced Cannizzaro reaction over neutral γ-alumina as a polymeric catalyst [electronic resource], Article Reactive and Functional Polymers ; 01/2002; 51(1):49-53 ; Soleimanzadeh, B ; Marandi, G. B
γ-Alumina is used to catalyze the Cannizzaro reaction in the absence of any base under microwave irradiation in high yields. In the case of terephthalaldehyde the reaction is carried out with high selectivity
Functionalized poly(amidoamine) dendrimer as a strong ionic Brønsted acid organocatalyst for protection/deprotection of aldehydes, Article Phosphorus, Sulfur and Silicon and the Related Elements ; Vol. 189, issue. 12 , 2014 , pp. 1794-1801 ; ISSN: 10426507 ; Hosseini, S. H ; Sharif University of Technology
Poly(amidoamine) dendrimer (PAMAM) was successfully functionalized by chlorosulfonic acid to form an strong ionic acid catalyst. The resulting polymeric catalyst was shown to be an efficient catalyst for the synthesis of 1,1-diacetyl from aldehydes under free solvent conditions at room temperature. Also, the deprotection of the resulting aldehydes was investigated under catalytic conditions. The Hammett acidity function of catalyst showed that catalyst is a strong Brønsted acid. Due to the multi-functional nature of PAMAM, the catalyst has high loading level of acidic protons
Article Monatshefte fur Chemie ; Volume 138, Issue 4 , 2007 , Pages 363-379 ; 00269247 (ISSN) ; Rahimi, A ; Pourjavadi, A ; Sharif University of Technology
Polymer supported reagents have found many applications in recent years. Scientists in research laboratories of agrochemical and pharmaceutical industries now routinely utilize these compounds to prepare ensembles of small organic molecules for screening. This review is aimed to highlight some of the most important applications of these promising materials in organic synthesis. Furthermore, an extensive listing of polymeric reagents that were recently used in organic synthesis is included. © Springer-Verlag 2007
Article Reactive and Functional Polymers ; Volume 51, Issue 1 , 2002 , Pages 49-53 ; 13815148 (ISSN) ; Soleimanzadeh, B ; Marandi, G. B ; Sharif University of Technology
Microwave induced Cannizzaro reaction, which was performed in presence of neutral γ-alumina as a polymeric catalyst, was discussed. Cannizzaro reaction was carried out on alumina surface and other unknown products were also obtained. Solvent extraction method was utilized to isolate mild and selective benzyl alcohol and carboxylic acids
Graphene oxide/poly(vinyl imidazole) nanocomposite: An effective support for preparation of highly loaded heterogeneous copper catalyst, Article Applied Organometallic Chemistry ; Volume 29, Issue 9 , June , 2015 , Pages 601-607 ; 02682605 (ISSN) ; Safaie, N ; Hosseini, S. H ; Bennett, C ; Sharif University of Technology
John Wiley and Sons Ltd 2015
A heterogeneous polymeric catalyst was synthesized by immobilization of copper ions in a graphene oxide/poly(vinyl imidazole) nanocomposite. This catalyst has proven to be highly active in a practical protocol for click synthesis of 1,2,3-triazole via one-pot three-component cycloaddition of halides, terminal alkynes and sodium azide. The reaction was carried out in water medium and good to excellent yields of products were obtained using only 1.0 mol% of catalyst. The catalyst can be readily recovered and reused eight times under the described reaction conditions without significant loss of activity. The reaction also proceeded well with only 0.002 mol% of catalyst, which shows the high...
Immobilized copper(II) on nitrogen-rich polymer-entrapped Fe3O4 nanoparticles: A highly loaded and magnetically recoverable catalyst for aqueous click chemistry, Article Applied Organometallic Chemistry ; Volume 30, Issue 2 , 2016 , Pages 73-80 ; 02682605 (ISSN) ; Hosseini, S. H ; Pour Javadi, A ; Bennett, C ; Sharif University of Technology
John Wiley and Sons Ltd
A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi-layered poly(2-dimethylaminoethyl acrylamide)-coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one-pot three-component reaction of alkyl halide, sodium azide and alkyne, known as copper-catalyzed click synthesis of 1,2,3-triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of...
Kinetic and morphological investigation on the magnesium ethoxide-based ziegler-natta catalyst for propylene polymerization using typical external donors, Article Macromolecular Symposia ; Volume 285, Issue 1 , 2009 , Pages 52-57 ; 10221360 (ISSN) ; Ramezani Saadat Abadi, A ; Hiraoka, Y ; Kim, S. Y ; Taniike, T ; Terano, M ; Sharif University of Technology
Kinetic and morphological aspects of slurry propylene polymerization using a MgCl2-supported Ziegler-Natta catalyst synthesized from a Mg(OEt)2 precursor in the presence and absence of two different external donors are investigated. The kinetic profiles show similar trend in presence and absence of donors. The Mg(OEt)2-based catalyst show a mild activation and a long-standing activity with good replication of the catalyst particles. The results show that synthesized Mg(OEt)2-based Ziegler-Natta catalyst presents a highly stable polymerization activity and good replication due to the uniform Ti distribution all over the catalyst particles. © 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Thermal degradation behavior and kinetic analysis of ultra high molecular weight polyethylene based multi-walled carbon nanotube nanocomposites prepared via in-situ polymerization, Article Journal of Macromolecular Science, Part A: Pure and Applied Chemistry ; Volume 49, Issue 9 , 2012 , Pages 749-757 ; 10601325 (ISSN) ; Saadatabadi, A. R ; Khorasheh, F ; Sharif University of Technology
Thermal degradation behavior of multi-wall carbon nanotubes (MWCNTs)/ultra high molecular weight polyethylene (UHMWPE) nanocomposites, with different nanotubes contents (0.5, 1.5 and 3.5 wt%) prepared via in-situ polymerization technique have been investigated using thermal gravimetric analysis (TGA). TGA spectra revealed that these nanocomposites had enhanced thermal stability and no significant mass loss (<0.4 wt%) occurred up to 350°C. Thermal degradation of these UHMWPE/MWCNT nanocomposites was investigated in terms of parameters such as the onset temperature of degradation (T 10), the decomposition temperature at 50% wt loss (T 50), the degradation temperature of maximum rate of the...
Article Journal of Applied Polymer Science ; Volume 116, Issue 3 , May , 2010 , Pages 1237-1246 ; 00218995 (ISSN) ; Shahsavan, H ; Bolouri, O ; Taranejoo, S ; Goodarzi, V ; Torabi Angaji, M ; Sharif University of Technology
Prediction of reaction yield as the most important characteristic process of a slurry polymerization industrial process of propylene has been carried out. Stacked neural network as an effective method for modeling of inherently complex and nonlinear systems-espe-cially a system with a limited number of experimental data points-was chosen for yield prediction. Also, effect of operational parameters on propylene polymerization yield was modeled by the use of this method. The catalyst system was Mg(OEt)2/DIBP/TiCl 4/PTES/AlEt3, where Mg(OEt)2, DIBP (diisobutyl phthalate), TiCl4, PTES (phenyl triethoxy silane), and triethyl aluminum (AlEt3) (TEAl) were employed as support, internal electron...
Tungstate-loaded triazine-based magnetic poly(Bis-imidazolium ionic liquid): An effective bi-functional catalyst for tandem selective oxidation/Knoevenagel condensation in water, Article Polymer (United Kingdom) ; Volume 112 , 2017 , Pages 342-350 ; 00323861 (ISSN) ; Tavakolizadeh, M ; Hosseini, S. H ; Pourjavadi, A ; Bennett, C ; Sharif University of Technology
Elsevier Ltd 2017
A novel bi-functional polymeric catalyst was synthesized by immobilization of tungstate anions onto the nitrogen rich poly(ionic liquid)/magnetic nanocomposite. The resulting catalyst has two types of catalytic sites: (i) immobilized WO4 anions with bis-imidazolium ionic liquid cation for selective oxidation of alcohols and (ii) basic amine groups for Knoevenagel condensation between produced aldehyde and malononitrile. Due to the polymeric nature of the catalyst, large amounts of tungstate and basic nitrogen groups were presented on the solid surface which led to a decrease in the applied catalyst mass for catalytic reaction. High catalytic activity and excellent selectivity of catalyst in...
A regioselective approach to synthesize indolyl diketone derivatives via magnetic polymeric copper-catalyst, Article Catalysis Letters ; 2021 ; 1011372X (ISSN) ; Jarahiyan, A ; Pourjavadi, A ; Sharif University of Technology
Abstract: In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis by a heterogeneous catalyst. The magnetic polyacrylonitrile was synthesized through anchoring acrylonitrile monomers on Fe3O4 nanoparticles surface and then modified with 2-aminopyridine. At the final step, copper nanoparticles were immobilized onto the polymeric support containing stable ligands from functionalized nitrile groups of polyacrylonitrile. The different techniques such as Fourier transmission infrared spectroscopy, X-ray diffraction, Field emission scanning electron microscopy, Transmission...
HRP-dendron nanoparticles: The efficient biocatalyst for enzymatic polymerization of poly(2,5-dimethoxyaniline), Article Journal of Molecular Catalysis B: Enzymatic ; Volume 90 , June , 2013 , Pages 139-143 ; 13811177 (ISSN) ; Vossoughi, M ; Shahrokhian, S ; Alemzadeh, I ; Sharif University of Technology
Synthesis of poly(2,5-dimethoxyanilie) (PDMA) catalyzed by nano reengineered horseradish peroxidase (HRP) with dendritic macromolecules, was studied as a function of reaction media. UV-vis, gel permeation chromatography and conductivity measurements were used to explain how the reaction media compositions influence the physical properties of PDMA. Nanostructured PDMA was also synthesized by oxidative polymerization in a novel and green bi-catalyst system involving HRP and ferric chloride. FTIR and UV-vis analysis confirmed the formation of emeraldine salt state of PDMA. The thermal stability of reengineered HRP granted further studies on the polymerization using bi-catalyst system at...