Sharif Digital Repository

Mesoporous MCM-48 silica was synthesized by templating method and the structure of particles was characterized by XRD, TEM and N 2 adsorption techniques. The surface modification of particles in order for introducing into PSF matrix was performed by dimethyldichlorosilane (DMDCS) silylation agent. SEM images of as-synthesized and modified MCM-48/PSF MMMs indicate that in the modified MCM-48 silica particles adhered well to the PSF matrix and that the synthesized MMMs were defect free. The incorporation of MCM-48 particles in to the PSF matrix and also surface coating of these MMMs by polydimethylsiloxane (PDMS) were performed. The quality of surface coating was investigated by SEM images and... 

Background: Nowadays, study and application of modified membranes for water treatment have been considered significantly. The aim of this study was to prepare and characterize a polysulfone (PSF)/graphene oxide (GO) nanocomposite membrane and to evaluate for arsenate rejection from water. Materials and methods: The nanocomposite PSF/GO membrane was fabricated using wet phase inversion method. The effect of GO on the synthesized membrane morphology and hydrophilicity was studied by using FE-SEM, AFM, contact angle, zeta potential, porosity and pore size tests. The membrane performance was also evaluated in terms of pure water flux and arsenate rejection. Results: ATR-FTIR confirmed the... 

The preparation of MCM-41 nanoparticles was made using tetraethylorthosilicate as silica source and cetyltrimethylammonium bromide as surfactant. The X-ray diffraction, transmission electron microscopy, laser particle size analysis and N2 adsorption techniques were used for characterization of nanoparticles. The dimethyldichlorosilan (DMDCS) was applied to improve the dispersion of MCM-41 nanoparticles into the polysulfone (PSF) matrix. The investigation on the thermal stability with thermogravimetric analysis showed the enhanced stability of membranes possessing higher loading of MCM-41 nanaoparticles. The scanning electron microscopy was used to evaluate the quality of particles dispersion... 

In this study, aiming at hexavalent chromium removal from aqueous solutions, different strategies were proposed for developing hydrophilic and surface functional polysulfone (PSf) membrane. In addition to PSf membrane, three different types of membranes were prepared by addition of SiO2 nano-particles to the dope solution and/or by deposition of polydopamine (PDA) layer on the surface of the membranes. The membranes (i.e. PSf, PSf/PDA, PSf/SiO2 and PSf/SiO2/PDA) were characterized by different techniques. The membranes' transport properties and the separation performance were studied using a filtration unit operated at a continuous dead-end flow mode. The kinetics and the separation... 

Low-frequency O 2 plasma was used to modify the surface of polysulfone gas-separation membranes. The effects of the treatment time and plasma power input on the membranes were also investigated. Pure CO 2 and CH 4 gas-permeation measurements were performed before and after plasma treatment. The results show the increase of permeability of the treated membranes due to surface ablation and surface polarization up to 5.63 and 68.80 gas-permeation units for CH 4 and CO 2, respectively, whereas, the CO 2/CH 4 selectivity of the treated membranes varied from 7.7 to 45.3, depending on the treatment conditions. Attenuated total reflection-Fourier transform infrared spectroscopy determined the... 

In this article an attempt was made to fabricate defect-free asymmetric polysulfone (PSf) membranes for the separation of oxygen and nitrogen. The approach is based on the enhanced delayed demixing by blending surface modifying macromolecules (SMMs) in the casting solution and by immersing the cast film in isopropanol for a certain period before it is immersed in water. Different SMMs, including hydrophobic and charged SMMs, were synthesized, characterized, and blended to the host PSf. It was found that the charged SMM could indeed contribute to the removal of defective pores from the skin layer and enhancement of oxygen/nitrogen selectivity. The experimental results were further interpreted... 

MCM-41 nanoparticles were prepared by in situ assembly of inorganic precursors and CTAB. The structure of nanoparticles was characterized by XRD, TEM, particle size analysis, N2 adsorption techniques. The surface modification of particles in order to perfect dispersion in polysulfone (PSf) matrix was performed by dimethyldichlorosilane (DMDCS) and aminopropyltrimethoxysilane (APTMS) as new modification agents. Thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and SEM analysis were applied to investigate thermal stability, glass transition temperature and quality of distribution of particle in the nanocomposite membrane, respectively. The PDMS was used to coat the... 

A gas sensor was developed to measure the concentration of binary gas mixtures. This sensor works based on the permeability change of different gas mixtures across the polymeric membranes. Although high values of permeability and selectivity are needed for an ideal separation, the performance of this sensor mainly depends on the permeability factor. Polysulfone and silicone rubber were applied as the membrane base and coat, respectively. Moreover, in contrast to existing polymeric sensors that use hollow fibers, the present sensor is made of flat membranes. This new design is cheaper, smaller, and easier to use in comparison to the hollow fiber polymeric sensors. In order to test the sensor... 

In this research, polysulfone (PSf) ultrafiltration (UF) membranes were prepared by a phase inversion method. Surface modification of the PSf membranes was carried out via grafting of acrylic acid as a hydrophilic monomer by free radical graft polymerization initiated by redox reaction. A central composite design (CCD) of response surface methodology (RSM) was applied to design the experiments. The process variables were acrylic acid concentration (CAA), redox system contact time (T1), and acrylic acid polymerization time (T2), while the contact angle (CA), pure water flux (PWF), and flux recovery ratio (FRR) were considered as the responses. Analysis of variance (ANOVA) demonstrated that... 

A totally computerized image processing program package is developed to analyze the SEM images of membrane surface and cross-section. Pore size distribution and porosity of the fabricated membranes are determined using the proposed image processing procedure. Furthermore, effect of coagulation bath temperature on the morphology and mechanical properties (such as tensile strength, strain break, tensile energy absorbent, and tensile stiffness) of Polysulfone (PSf) membranes are investigated. The results reveal that the mechanical properties are higher when N-methyl-2-pyrrolidone (NMP) is used as solvent. Also, an increase in the coagulation bath temperature caused a monotonous increase in the... 

The main challenge in many applications of acetic acid is acid dehydration and its recovery from wastewater streams. Therefore, the performance of polyamide thin film composite is evaluated to separate acetic acid from water. To reach this goal, the formation of polyamide layer on polysulfone support membrane was investigated via interfacial polymerization (IP) of meta-phenylenediamine (MPD) in water with trimesoyl chloride (TMC) in hexane. Also, the effect of synthesis conditions, such as concentration of monomers and curing temperature on separation of acetic acid from water were investigated by reverse osmosis process. Moreover, the separation mechanism was discussed. The solute... 

Integrally skinned asymmetric membranes for the separation of O 2 and N 2 were fabricated by the phase inversion technique from polysulfone, polyetherimide, and polyimide. Two types of surface modifying macromolecules (SMMs) including hydrophilic SMM (LSMM) and charged SMM (cSMM) were synthesized and blended with the casting solution to modify the membrane surface. The cast film was then immersed in the first coagulant alcohol (methanol, ethanol, or isopropanol) for a predetermined period, before being immersed in the second coagulant (water). The SMMs used in these experiments were laboratory synthesized by the two-step process of polyurethane prepolymer synthesis and end capping, before... 

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly... 

Polysulfone (PSU) and polyethersulfone (PES) porous membranes; and mixed polymer with nanoparticles TiO2, were prepared for air humidification. The mechanical properties and morphology of these membranes were studied by Tensile tester and SEM/EDX. The effects of membrane composition and operating factors on humidifier performance were investigated. The results revealed that the membrane composition and its structure have significant effect on humidification. The porous membranes with finger type cavities had higher humidification performance but lower mechanical properties. Water flux of the membranes was about 0.16-0.2L/hm2 at 25°C. Furthermore, adding 0.1wt% TiO2 nanoparticles to casting... 

The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results... 

This study investigates the effects of polymer concentration and solvent type on the pore size distribution (PSD) of the fabricated gas-liquid membrane contactors (MCs). Eighteen flat-sheet MCs are fabricated using polysulfone (PSf) and polyethersulfone (PES) polymers, with polymer concentration of 10%, 15%, and 20%. Dimethylformamide (DMF) and n-methyl-2-pyrrolidone (NMP) solvents are used to prepare the polymeric solutions. The role of polyvinylpyrrolidone (PVP) on the mean pore size of MCs is also studied. Scanning electron microscope (SEM) analysis is applied to visualize the pore system of the fabricated MCs. Image processing technique is used to obtain the PSD of the fabricated MCs... 

Crude oil desalter effluent from a Tehran oil refinery was treated by a hybrid UF/RO membrane separation process. Ultrafiltration (UF) was used primarily to remove the emulsified oil droplets followed by the removal of total dissolved solids (TDS) via reverse osmosis (RO). The UF membrane was a hydrophilic flat sheet polysulfone ultrafiltration membrane with MWCO of 100 kDa while the RO membrane was a spiral-wound thin-film composite polyamide. Effect of operating conditions such as transmembrane pressure and crossflow velocity were studied in UF pretreatment. The experimental results showed that the UF membrane removed more than 75% of the oil and can be considered as an effective... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this study, a new facile and cost effective method is used to modify polysulfone membrane surface in order to improve the hydrophilicity, antifouling, and blood compatibility. This modification was performed by adding two functional monomers on the dialysis membrane. Polysulfone (PSF) membranes containing polyvinylpyrrolidone were prepared via phase inversion technique. In the next step, free radical polymerization combined with surface polymerization was used to introduce acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA) onto the polysulfone membrane surface via circulation of initiator and monomer solutions across the membrane surface, respectively. Various monomer concentrations...