Loading...
Search for:
pressure-head
0.005 seconds
Hydrograph attenuation along a pipe using a Flush tank
, Article Urban Water Management: Challenges and Oppurtunities - 11th International Conference on Computing and Control for the Water Industry ; Volume 1 , 2011 ; 0953914089 (ISBN); 9780953914081 (ISBN) ; Mahmoud Borghei, S ; Sharif University of Technology
Abstract
One of the miscellaneous units that are frequently used in water and wastewater systems is flush tank. Flush tank increases the self cleaning velocity in the conduit, and helps to clear the conduits from deposits and contaminations. While these units have been used for many years, there is not enough information about the hydraulic performance of these units in respect to the discharge, distance from the tank and the pipe hydraulics. In this paper the experimental results from observed hydrographs at different distances from the flush tank in a pipe has been presented. The variables include; volume of releasing water (or inlet hydrograph), upstream head, pipe diameter (3 cm), pipe length and...
Experimental Study of Hydraulics of Flush Tanks in Sewer Networks
, M.Sc. Thesis Sharif University of Technology ; Borgheie, Mahmoud (Supervisor)
Abstract
One of the miscellaneous units that are frequently used in water and wastewater systems is flush tank. Flush tank increases the self cleaning velocity in the conduit, and helps to clear the conduits from deposits and contaminations. While these units have been used for many years, there is not enough information about the hydraulic performance of these units in respect to the discharge, distance from the tank and the pipe hydraulics. In this paper the experimental results from observed hydrographs at different distances from the flush tank in a pipe has been presented. The variables include; volume of releasing water (or inlet hydrograph), upstream head, pipe diameter (3 and 4 cm), pipe...
Investigation of switching time and pressure head effects on hydro magnetic micro-pump and flow controller
, Article 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008, 10 August 2008 through 14 August 2008, Jacksonville, FL ; Volume 2 , 2009 , Pages 463-470 ; 9780791848418 (ISBN) ; Shafii, M. B ; Fluids Engineering Division, ASME ; Sharif University of Technology
2009
Abstract
The significant importance of micro-scaled devices in medicine, lab-on-a-chip, and etc resulted in a vast variety of researches. The idea behind the novel hydro magnetic micro-pump and flow controller is that ferromagnetic particles, mixed and dispersed in a carrier fluid, can be accumulated and retained at specific sites to form pistons in a micro-tube using some external magnetic field sources along the micro-tube. This external magnetic field is related to some solenoids, which are turned on and off alternatively. Depending upon dragging speed of these pistons, which itself is a function of switching time, this device can be used to either increase (pumping) or decrease (valving) the flow...
Performance improvement of mixed-flow centrifugal pumps with new impeller shrouds: Numerical and experimental investigations
, Article Renewable Energy ; Volume 163 , 2021 , Pages 635-648 ; 09601481 (ISSN) ; Khalesi, J ; Jafari, M ; Gazori, H. O ; Sharif University of Technology
Elsevier Ltd
2021
Abstract
A new impeller configuration with innovatively-designed shrouds is introduced, and its impact on the pressure head and efficiency of the semi-open centrifugal pump is explored using experimental and numerical approaches. The proposed design includes attaching specific plates called bladelets to a semi-open impeller to limit the secondary flows over the blades resulting in an increase in the pump head and efficiency. Hydraulic performance of a centrifugal pump with three different bladelets at angles of 30°, 60°, and 90° is investigated experimentally, and the results are compared to semi-open and closed impellers. The values of pressure head and efficiency of the proposed centrifugal pump...
Deriving an analytical model for hydro-magnetic micro flow controller
, Article 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008, Darmstadt, 23 June 2008 through 25 June 2008 ; Issue PART B , June , 2008 , Pages 1139-1146 ; 0791848345 (ISBN); 9780791848340 (ISBN) ; Shafii, M. B ; ASME ; Sharif University of Technology
2008
Abstract
Fluid control, namely pumping and valving, is a critical factor in the performance of micro-fluidic systems. In recent years a variety of micro-fluidic systems are developed for the purpose of miniaturizing fluid handling, and chemical analysis to develop Lab On a Chip (LOC) technology. The mentioned facts resulted in design and fabrication of a novel hydromagnetic flow controller. The idea behind this device is that magnetic particles, mixed and dispersed in a carrier liquid, can be accumulated in the form of a piston. Depending upon dragging speed of these pistons, which itself is a function of switching time, this device can be used to either increase (pumping) or decrease (valving) the...