Loading...
Search for: pressure-less-sintering
0.006 seconds

    Effects of HfB2 addition on pressureless sintering behavior and microstructure of ZrB2-SiC composites

    , Article International Journal of Refractory Metals and Hard Materials ; Volume 94 , 2021 ; 02634368 (ISSN) Jafari, S ; Bavand Vandchali, M ; Mashhadi, M ; Nemati, A ; Sharif University of Technology
    Elsevier Ltd  2021
    Abstract
    In this study the effects of HfB2 addition were investigated on the sintering behavior, densification and microstructure of ZrB2-SiC in the presence of B4C and MoSi2 as a sintering catalyst. 5, 10, 15 and 20 wt% of HfB2 was substituted with ZrB2 in ultra-high temperature ceramic composites of ZrB2-SiC. Additionally, the effect of using nano-scale against common micron size SiC was compared. All compositions were sintered for 1 h in 2100 °C and 2150 °C. Relative and bulk density and open porosity percentage of samples were calculated by Archimedes method. Dimensional changes of pellets and their weight reduction after pyrolysis and sintering proved that increasing of HfB2 leads to increasing... 

    Comprehensive study on the effect of SiC and carbon additives on the pressureless sintering and microstructural and mechanical characteristics of new ultra-high temperature ZrB2 ceramics

    , Article Ceramics International ; Volume 41, Issue 9, Part A , November , 2015 , Pages 11456–11463 ; 02728842 (ISSN) Khoeini, M ; Nemati, A ; Zakeri, M ; Tamizifar, M ; Samadi, H ; Sharif University of Technology
    Elsevier Ltd  2015
    Abstract
    The combined effects of SiC and carbon additives on the densification, structure and characteristics of pressureless sintered ZrB2-SiC ceramic composites were studied. The ZrB2-SiC (1-10wt%) composite powders were mixed by 1-2wt% carbon. The prepared powder mixtures were then cold-consolidated and sintered in argon environment in the temperature range of 1800-2100°C for 2h. The constituted phases and microstructural evolutions were studied using x-ray diffraction and scanning electron microscope equipped with an energy dispersive x-ray detector. The obtained results concluded that the densification was increased by extending the sintering time and also by prior holding... 

    Pressureless sintering of ZrB 2 ceramics codoped with TiC and graphite

    , Article International Journal of Refractory Metals and Hard Materials ; Volume 81 , 2019 , Pages 189-195 ; 02634368 (ISSN) Khoeini, M ; Nemati, A ; Zakeri, M ; Shahedi Asl, M ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    In this research, the pressureless sintering of ZrB 2 composites were studied to obtain the highest densification and investigate the effects of TiC (2–10% wt) and graphite (1–2% wt) additives on the sinterability. The results showed that by adding TiC, the porosity and water absorption of the samples decreased, resulting in an increase in the density of the samples up to ~98% of the theoretical density. The addition of graphite and TiC reduced the surface oxide layers, improved the density and prevented the grain growth. The graphite additive reacted with B 2 O 3 and ZrO 2 and allowed the system to achieve a complete densification at 2000 °C. Both TiC and graphite additives were completely...