Sharif Digital Repository

One of the primary challenges of re-planning in high-speed urban railways is the randomness of disruptive events. In this study, an integrated disturbance recovery model presented in which short-turn and stop-skip service operations are optimized together to minimize the average of passengers’ waiting times. This study develops a discrete-event simulation model that employs a variable neighborhood search algorithm to maintain the service level under infrastructure elements’ unavailability. Due to the unpredictable nature of the incidents, the uncertainty associated with obstruction duration is experimentally analyzed through probabilistic scenarios. The computational experiments are... 

One of the primary challenges of re-planning in high-speed urban railways is the randomness of disruptive events. In this study, an integrated disturbance recovery model presented in which short-turn and stop-skip service operations are optimized together to minimize the average of passengers’ waiting times. This study develops a discrete-event simulation model that employs a variable neighborhood search algorithm to maintain the service level under infrastructure elements’ unavailability. Due to the unpredictable nature of the incidents, the uncertainty associated with obstruction duration is experimentally analyzed through probabilistic scenarios. The computational experiments are... 

In this research, Zn, Ni, and Cu recovery from mobile phone printed circuit boards was investigated. The initial pH and pulp density using Aspergillus niger or Penicillium simplicissimum fungi were optimized to improve the recovery of Zn, Ni, and Cu using a central composite design. Fungi were able to recover 97% of Cu. Often for Ni recovery, A. niger was more effective, but in low pulp densities and low pH, P. simplicissimum was preferred. For recovery of Zn, A. niger is more appropriate at pH lower than 6, but P. simplicissimum outperforms at pH higher than 6. Under the optimum conditions (pulp density of 4 gL−1 and initial pH 10), the respective recovery of Cu, Ni, and Zn was determined... 

Vertical copper oxide nanoflakes were synthesized on a Cu foil through oxidation in alkaline conditions. X-ray photoelectron spectroscopy showed that after exposing the nanoflakes to an Escherichia coli bacterial suspension, the outermost surface of the nanoflakes was chemically reduced through the glycolysis process of the bacteria. Current-voltage (I-V) characteristics of the nanoflakes (measured perpendicular to surface of the Cu foil by using conductive atomic force microscopy) indicated that electrical resistivity of the nanoflakes increased about one order of magnitude after exposure to the bacterial suspension. The nanoflakes reduced by the bacterial suspension could also be... 

This paper introduces a Dynamic Read SRAM (DRSRAM) architecture for high-density subthreshold RAM applications. DRSRAM performs a dynamic read operation to overcome the poor stability and bitline leakage problem of 6T SRAM cell in sub-threshold region. It is shown that there is fundamental limit for wordline activation time and recovery time under a given cell mismatch and bitline leakage. To verify the proposed technique, a 64128 bit array of the 6T bit-cell is simulated in 90 nm CMOS technology. The simulation results show a 100% noise margin enhancement at subthreshold region. This design operates down to 300 mV at a 1 MHz clock rate with noise margins as large as 72 mV. This design... 

Nanosecond pulsed-power generators have many applications in industries. As the rise time and fall time of conventional semiconductor switches are usually more than a few nanoseconds, it is necessary to employ special switches or new pulse generating methods to achieve nanosecond pulses. A common method for producing narrow pulse voltage waveforms is using the reverse recovery process of diodes. In this method, a super fast recovery diode is used as an opening switch in an inductor current path. A drift step recovery diode can form a rapid cut-off current front; Hence this method can be an effective solution to generate narrow pulses. This paper describes an investigation about the effect of... 

Numerous operational issues including voltage deviation and instability arise in distribution networks with insufficient reactive support. Static issues have been widely studied for years, and some dynamic ones are recently gaining attention due to the proliferation of distributed generation (DG). In this paper, a two-step reactive compensation planning procedure is proposed to address these challenges. In the first step, passive compensators are optimally sited and sized using a metaheuristic algorithm in order to improve steady-state indices including power efficiency, voltage profile, and static voltage stability. In the second step, a static synchronous compensator (Statcom) is located... 

In conducting mechanical tests on the brain tissue, it is preferred to perform multiple tests on the same sample. In this study, we investigated the behavior of the bovine brain tissue in repeated compression tests wit h 0 recovery periods (namely, 10, 60, 120, 180, 240, and 300 s). Compression tests were performed on cylindrical samples with average diameter and height of 18.0 mm and 15.0 mm, respectively. Two testing protocols were employed; t he first one comprised experiments wit h 5, 25, and 125 mm/min loading speeds up to 33% strain and the second one consisted of tests with 25 and 125 mm/min loading speeds up to 17% strain. Each experiment was conducted in two cycles separated by a... 

In conducting mechanical tests on the brain tissue, it is preferred to perform multiple tests on the same sample. In this study, we investigated the behavior of the bovine brain tissue in repeated compression tests wit h 0 recovery periods (namely, 10, 60, 120, 180, 240, and 300 s). Compression tests were performed on cylindrical samples with average diameter and height of 18.0 mm and 15.0 mm, respectively. Two testing protocols were employed; t he first one comprised experiments wit h 5, 25, and 125 mm/min loading speeds up to 33% strain and the second one consisted of tests with 25 and 125 mm/min loading speeds up to 17% strain. Each experiment was conducted in two cycles separated by a... 

In this research, Zn, Ni, and Cu recovery from mobile phone printed circuit boards was investigated. The initial pH and pulp density using Aspergillus niger or Penicillium simplicissimum fungi were optimized to improve the recovery of Zn, Ni, and Cu using a central composite design. Fungi were able to recover 97% of Cu. Often for Ni recovery, A. niger was more effective, but in low pulp densities and low pH, P. simplicissimum was preferred. For recovery of Zn, A. niger is more appropriate at pH lower than 6, but P. simplicissimum outperforms at pH higher than 6. Under the optimum conditions (pulp density of 4 gL−1 and initial pH 10), the respective recovery of Cu, Ni, and Zn was determined... 

We have investigated hydrogen sensing properties of electrodeposited Pd clusters on macroporous silicon substrates. Porous layer was prepared by electrochemical etching of p-type silicon (100) wafer in organic electrolyte DMF (dimethylformamide) diluted by HF (%95 Vol. %). The deposition of Pd was carried out by linear voltammetry (LV) technique. This technique was taken for reduction of palladium ions in the potential range from 0.4 V to -1 V vs. SCE, at the scan rate of 20 mV s-1. Some samples were annealed at 300°C for an hour in air to study the effect of heat treatment on their gas sensitivity. Surface structural and chemical properties of the samples were characterised using Scanning...