Sharif Digital Repository

Steel bracing systems can be used effectively for seismic retrofitting of existing RC buildings as well as for seismic design of new building. Steel bracing system has been used to increase the lateral load resistance of steel structures. In recent years the concept of steel bracing has also been applied to the retrofitting of reinforced concrete frames, especially to improve seismic performance of non-ductile reinforced concrete buildings. The use of steel bracing systems for seismic rehabilitation of RC frames offers some advantages such as (a) minimal added weight to the structure; (b) ease and speed of construction;(c) increased architectural flexibility; in comparison with RC shear... 

There are many parameters which are utilized to obtain a more reasonable performance for structures under earthquake excitations in seismic provisions. It is well recognized that the main character to design of structures under seismic excitation is probabilistic rather than deterministic; therefore, it should be determined if the probability of structural damages is decreased when such parameters change in design of structures. In this thesis, fragility curves are developed in order to evaluate these parameters. Fragility curves are employed for various probability parameters. These diagrams are utilized to demonstrate when a coefficient or a number of parameters are used to improve... 

Heavy damage developed from near field earthquake in resent years cause serious attention to this problem. Investigation shows that these records include large energy pulse, unlike far field earthquake. Overall effect of near field earthquakes ignored in the most building codes. The purpose of this investigation to find effect of near field earthquake on reinforced concrete moment frames. To achieve this goal Erduran damage index is efficient way to calculate damage. Two 4th and 8th story reinforcement concrete moment frame buildinges with moderate and high ductility designed by strength criterion. Seven pairs of near field earthquakes and seven pairs of far field earthquakes scaled and use... 

The observed response of medium rise buildings during sever earthquakes worldwide has indicated that RC buildings with shear walls behave considerably better than other buildings. The conviction that shear walls are inherently brittle still prevails amongst engineers, and therefore, they usually prefer to choose moment resisting RC frames without shear walls. In this study, a number of RC frames, with and without shear walls are designed in accordance with the seismic codes, and are then subjected to an assemble of severe earthquakes. The results of timehistory nonlinear analyses of these models are then used to investigate the effect of the presence of shear walls within the framework of... 

With occurring severe earthquakes, damages of columns in RC buildings can lead to overall failure and collapse. So retrofitting of such columns that do not comply with the design requirements is necessary to prevent such phenomena. A variety of methods has been introduced so far for retrofitting. The key factors in determining the retrofitting methods are being economic and easily implemented in the design. Confining concrete columns with pre-stressed steel strips is a new technique that is simple and economic. Previous experimental experiments have shown that this method can enhance ductility and overall seismic behavior of such columns.
In the present study three and six story frames... 

Explosion as a physical phenomenon have various effects on the environment, including living organisms, surrounding buildings, equipment and infrastructure there. Due to such extreme loading conditions, efforts have been made during the past three decades to develop methods of structural analysis and design to resist blast loads. The analysis and design of structures subjected to blast loads require a detailed understanding of blast phenomena and the dynamic response of various structural elements. The most appropriate method for evaluating the behavior of structures under blast loading is performance approach which specifies the response of structures against explosion. It seems that... 

Concentric steel braces and brace-type dampers are often applied to the upgrading of reinforced concrete frames subjected to lateral loads. These braces may develop High axial tension forces, and transferring them appropriately to the existing beam– Column joints is a key challenge. This paper investigates a solution for connecting the end-plate of the steel brace with the frame, using shear-key plates fixed to the concrete with anchor bolts, and a low friction material inserted between the end-plates and the shear-key plates. The presence of the low friction material impedes the development of tension forces in the anchor bolts and ensures that they are basically subjected to shear forces.... 

Wall systems are an essential part of the buildings and their capacity should be properly considered in their design. However, the seismic behavior of building systems with in-filled walls and their interaction is a very complex issue, yet to be understood. Using the in-filled walls in the buildings without including them in the design process changes the whole behavior of the structural system as well as their failure mechanism under earthquake excitations. On the other hand, there have been extensive researches on rehabilitation of the structures with in-filled walls or designing them as the main or one of the lateral load carrying systems against seismic input. In this research, first the... 

Many reinforced concrete frame buildings with masonry partitions have been built all around the world. Observations from past earthquakes show that the partitions can endanger the life of buildings occupants and lead to significant damage and loss. Failure of the partitions can be caused by dynamic vibrations and in-plane and out-of-plane loads/displacements. The interaction between in-plane and out-of-plan behaviors and location of partitions, nonlinearity and higher modes of the structures could affect the out-of- plane seismic demands on partitions. Therefore, there is a need for a comprehensive assessment in order to limit the loss in buildings with masonry partitions. This research... 

Nowadays one of the important issues in earthquake engineering is seismic vulnerability assessment of structures and selecting the best retrofit method for them. On the other hand due to probabilistic nature of earthquake occurrence and uncertainties exist in determination of structure capacity, probabilistic approaches in seismic assessment and retrofit of structure, are highly interested by many researchers. Therefore in this research four probabilistic based methods in seismic retrofit and assessment of structures are proposed and to illustrate the application of these methods, which are summarized below, some RC frames are investigated:
1- Seismic assessment of structures using new... 

There are two aspects to this research. In the first section, a numerical method is used to analyze the seismic performance of reinforced concrete frames with corrugated and flat steel shear walls as a lateral bearing system. In the second section, the seismic performance factors for reinforced concrete frames with corrugated steel shear walls (response modification factor (R), overstrength factor (Ω_0), and deflection amplification factor (C_d)) for reinforced concrete frame with corrugated steel shear walls have been determined.In the first section of this study, a three-story reinforced concrete frame with a flat steel shear wall with a scale of one to three is validated in finite element...