Sharif Digital Repository

In this research, rubber based nanocomposites with presence of nanoparticle has been studied. Styrene butadiene rubber (SBR)/nanocopper (NC) composites were prepared using two-roll mill method. Transmission electron microscope (TEM) and scanning electron microscope (SEM) images showed proper dispersion of NC in the SBR matrix without substantial agglomeration of nanoparticles. To evaluate the curing properties of nanocomposite samples, swelling and cure rheometric tests were conducted. Moreover, the rheological studies were carried out over a range of shear rates. The effect of NC particles was examined on the thermal behavior of the SBR using thermal gravimetric analysis (TGA). Furthermore,... 

Self-compacting concrete (SCC) is a highly-workable concrete that without any vibration or impact and under its own weight fills the formwork, and it also passes easily through small spaces between rebars. In this paper, the effect of steel fibers on rheological properties, compressive strength, splitting tensile strength, flexural strength, and flexural toughness of SCC specimens, using four different steel fiber volume fractions (0.5%, 1%, 1.5%, and 2%), were investigated. Two mix designs with strengths of 40 MPa (medium strength) and 60 MPa (high strength) were considered. Rheological properties were determined through slump flow time and diameter, L-box, and V-funnel flow time tests.... 

This study examined the aging of neat and modified binders at intermediate temperatures. The neat binder was modified using two crumb rubber (CR) and styrene–butadiene–styrene (SBS) contents. The linear and non-linear rheological test results and parameters exhibited different aging susceptibilities for each binder. A new aging/cracking parameter is introduced based on the Christen-Anderson model. The limiting values are defined to assess cracking potential after PAV aging. The SBS binders were highly sensitive to aging, but the addition of sulfur noticeably improved their rheological and cracking properties and aging resistance. Among the studied parameters, four were deemed suitable to... 

Abstract In this work, two [60] fullerene derivatives were employed as flow improvers for waxy crude oil to reduce problems caused by the crystallization of paraffin during the production and/or transportation of the crude oil. These amine-based derivatives of [60] fullerene have been applied as wax inhibitor for improvement of rheological performance as well as pour point depressant in a waxy crude oil. Moreover, the influence of these [60] fullerene derivatives on the viscosity and pour point was also investigated in an Iranian waxy crude oil sample. The [60] fullerene derivatives were simply prepared by stirring a solution of [60] fullerene and two lipophilic amines. The results similarly... 

The effects of different nano-SiO2 contents on the rheological properties of poly(vinylidene fluoride) (PVDF) solution and mechanical, thermal, structural, and piezoelectric properties of composite nanofibers were investigated. Results showed an increase in fiber diameter (∼125 to 350 nm) and ∼450% increase in tensile strength as the content of nano-SiO2 particles increased. The degree of crystallinity decreased by 19% as the nano-SiO2 content increased by 2% (w/w). Further investigation demonstrated that silica could significantly improve the piezoelectric properties of PVDF nanofibers as the output voltage showed an increase in the presence of silica attributed to change in the crystalline... 

The authors carried out the study to prepare chitosan N-isopropylacrylamide hydrogel via heating and radiation processes. Properties investigation of prepared samples revealed that radiation prepared samples show higher yield and swelling ratios in comparison with the heating prepared ones. Effects of hydrogel addition to drilling mud on its important rheological properties such as apparent viscosity, plastic viscosity, and stress-strain behavior are measured. The rheological properties of hydrogel were compared with cellulosemethylcarboxyl and resins that are widely used in drilling fluid. The results demonstrate that whereas linear polymer effects on mud properties are more significant in... 

Effects of molecular weight and structure of polyamide 6 (PA6) on morphology and properties of PA6/MWCNT prepared by melt mixing were investigated. Microscopic analysis showed fine dispersion of MWCNT within low viscosity PA6s due to domination of melt infiltration into MWCNT agglomerate at low viscosity matrices with linear structure. Rheological data indicated good interfacial interaction with no percolation of MWCNT up to 2 wt% loading. DSC thermograms showed nucleating role of MWCNT on crystallization of PA6s with marginal effect on crystallinity. Experimental data supported with micromechanical model showed limited improvement on mechanical properties, but it was closely consistent with... 

Gelcasting is a novel forming method in fabricating complex three dimensional ceramic parts, and has many parameters and characteristics required to be specified. Up to now, few articles have been published on determination of the idle time of gelation precisely. In this work the chemorheology of gelation in aqueous solution of acrylamide and N, N′ methylenebisacrylamide monomer, and zirconia (PSZ) suspensions of this solution was investigated. As the viscosity of gel system increases abruptly in gelation point, idle time can be determined precisely by measurement of viscosity against time. Idle time can also be determined through temperature measurement against time since the reaction of... 

The aim of the present study is to investigate the effects of using hybrid fibers on rheological, mechanical and durability properties of the high-strength self-consolidating concrete (SCC). For this purpose, two types of fibers including hooked-end steel fibers and polypropylene fibers were used. In this study, a total of eleven mixtures were used: one as a control mix, one containing 0.5% steel fibers, four containing 0.5% hybrid fibers (steel and polypropylene), one containing 1.0% steel fibers and the four containing 1.0% hybrid fibers (steel and polypropylene). For investigating the rheological properties, slump flow, J-ring and V-funnel tests were performed. Mechanical properties were... 

The principal objective involved in this research is to explore the mechanical behaviour of the binder using different mineral fillers such as stone dust (SD), brick dust (BD) and fly ash Class F (FA). Currently, a large quantity of roads is being constructed under the China-Pakistan Economic Corridor (CPEC) project. It is a major concern for quality of road to with stand heavy loads. For the investigation of the quality of roads, it is mandatory to evaluate the behaviour of mineral fillers addition in asphalt mastic. Fatigue cracking, thermal cracking and permanent deformation have been found a major common distress in the construction of road networks. In this study, the behaviour of... 

In this research, it is aimed to enhance the heat transfer properties of the carbon nanotubes through nitrogen doping. To this end, nitrogen-doped multiwall carbon nanotubes (N-CNTs) were synthesized via chemical vapor deposition method. For supplying carbon and nitrogen during the synthesis of N-CNTs, camphor and urea were used, respectively, at 1000 °C over Co–Mo/MgO nanocatalyst in a hydrogen atmosphere. N-CNTs with three different nitrogen loadings of 0.56, 0.98, and 1.38 mass% were synthesized, after which, water/N-CNT nanofluids of these three samples with concentrations of 0.1, 0.2, and 0.5 mass% were prepared. To obtain a stable nanofluid, N-CNTs were functionalized by nitric acid... 

The hybrid-polymer nanocomposite poly(styrene-methyl methacrylate- acrylic acid) /nanoclay was synthesized by miniemulsion polymerization for novel use as a drilling fluid additive. Three low-solid-drilling fluids (bentonite-based; natural polymer-based; nanoclay-based) were formulated using the hybrid nanocomposite as an additive and their rheological performance compared. The polymer/clay hybrid nanoparticles significantly improve rheological and filtration properties of the drilling fluids and they remain stable at high pressure, high temperature and harsh salinity conditions. The fluids’ filtration properties improve as the concentration of the polymer/nanoclay-hybrid-nanoparticles...