Sharif Digital Repository

An eco-friendly gold-based catalyst supported on proline decorated montmorillonite was synthesized. The catalyst was characterized by combination of Fourier-transform infrared spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett Teller (BET) surface area analysis, Ultraviolet–visible spectroscopy (UV-Vis), Energy-dispersive X-ray spectroscopy (EDX), thermo gravimetric analysis (TGA) and atomic absorption spectroscopy (AAS) techniques. The synthesized catalyst was found to be a highly efficient heterogeneous nanocatalyst for multi component A3 coupling reaction of aldehyde, amine and alkyne... 

The first example of a heterogeneous catalytically active system for Buchwald–Hartwig and Ullmann homocoupling of unactivated aryl halides (fluorobenzene) is presented. The novel magnetic heterogeneous palladium catalyst was synthesized by immobilization of palladium ions onto an aminopyridine-functionalized Fe3O4. The catalyst was fully characterized by FTIR spectroscopy, temperature-programmed reduction, thermogravimetric analysis, CHN elemental analysis, transmission electron microscopy, field-emission scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and atomic absorption spectroscopy. By using this catalyst system, various types of primary and... 

A typical Cobalt-Copper ferrite nanoparticles (CoCuFe2O4) was used as a catalyst for one-pot [3+2] cycloaddition of alkyl azides with alkynes at room temperature in green media. These nanoparticles were synthesized by using co-precipitation method and were fully characterized by physiochemical technique. By this catalyst system, various types of alkyl halides were coupled with alkynes efficiently to furnish 1,2,3 triazoles in excellent yields within short reaction time. The requirement on energy and time for the Click reaction extremely minimized in this method compared to previously reported reactions as an inevitable trend in development of green chemistry. Using green solvent, inexpensive... 

A mild, convenient, and practical one-pot procedure for the direct synthesis of dithiocarbamates has been developed by condensation of amines, CS2, and a Michael acceptor, under solvent-free conditions at room temperature in good to excellent yields. © Georg Thieme Verlag Stuttgart  

An environmentally benign, highly efficient, and simple protocol for the synthesis of various structurally divergent dithiocarbamate derivatives in one-pot reaction of amines, carbon disulfide, and epoxides, without using any solvent and catalyst at room temperature, is presented. This new procedure has the advantages of higher yield, lower cost, reduced environmental impact, and simple work-up procedure. © Georg Thieme Verlag Stuttgart  

An environmentally benign, aqueous synthesis of 1,2-azidoalcohols via regioselective ring opening of their epoxides using magnetic imidazolium based dicationic room temperature ionic liquid, [pbmim](FeCl4)2, as an efficient magnetic phase transfer catalyst in water has been described. The present approach offers the advantages of clean reaction, simple methodology, short reaction time, high yield, easy purification and reusable catalyst  

Pursuing a sensing structure with a large effective surface area, partial ordered arrays of ZnO nanorods with flower-like structures are introduced for gas sensing applications. Room temperature H2S response of the grown structure shows significant enhancement after modification with Au nanoparticles. High response (about 1270 at 6 ppm H2S gas) and selectivity were achieved by depositing an Au layer with nominal thickness ∼6 nm. X-ray photoelectron spectroscopy (XPS) was utilized to describe the H2S sensing mechanism  

A series of novel pseudopeptides contained coumarin skeleton were synthesized through the Ugi-four-component reaction. The 3-substituted coumarin-3-carboxamides were formed through reaction of benzaldehyde derivatives, anilines, coumarin-3- carboxylic acid and isocyanides with high yields and high bond-forming efficiency at room temperature. These novel amidated coumarins exhibit brilliant fluorescence in range of 535-547 nm in chloroform  

A convenient one-pot multi-component reaction of aromatic aldehydes, enolizable ketones or β-keto esters and acetonitrile in the presence of acetyl chloride and 10 mol% ZnO nanoparticles for the synthesis of β-acetamido ketones/esters at room temperature is described. © 2007 Elsevier B.V. All rights reserved  

Eight new chitin derivatives have been synthesized via SN2 reaction of primary and secondary amines with tosylchitin. The products were characterized using FTIR and 1H NMR spectroscopy. A degree of substitution ∼ 1 was achieved through this process. These materials are soluble in water at room temperature, which enable their further applications in the future. © 2007 WILEY-VCH Verlag GmbH & Co. KGaA  

Two room temperature liquid salts containing molybdenum(VI), [BMIM] 2[MoO2(NCS)4] (1) and [DMIM] 2[MoO2(NCS)4] (2), were immobilized on ionic liquid-modified silica leading to materials which showed notable catalytic activity for the reduction of sulfoxides into sulfides with triphenylphosphine (PPh3). The molybdenum liquid salts immobilized on the supported ionic liquid phase could be reused at least for three catalytic cycles without significant loss of activity  

This work presents a procedure for functionalization of graphene sheets from edges by polyglycerol. Hyperbranched polyglycerol with a bi-dentate aromatic segment in its focal point was synthesized and used to sandwich graphene sheets from the cut-edges. Due to the hydrophobicity of the flat surface of the edge-functionalized graphenes and hydrophilicity of their edges, they changed their conformation from the extended- to the closed-state and formed nanocapsules in aqueous solutions. Spectroscopy and microscopy evaluations showed that the average size for nanocapsules is 300 nm. They were able to encapsulate hydrophobic molecules such as doxorubicin in aqueous solutions with a high loading... 

Fiber bending and temperature loss mechanisms in plastic optical fibers are reported.A simple arrangement is used to monitor the fiber bending and temperature by output power variation. Powers in the fibers in bend-free situation at room temperature and under rolling deforming force at different water bath temperatures (20-60°C) are measured and compared. Reported arrangements can be used as a temperature sensor  

(Chemical Equation Presented) New 2-alkyl-5-aryl-(1H)-pyrrole-4-ol derivatives were synthesized via three-component reaction of β-dicarbonyl compounds with arylglyoxals in the presence of ammonium acetate in water at room temperature. © 2008 American Chemical Society  

The Taguchi method, a robust experimental design for optimization, was used for the synthesis of a superabsorbent hydrogel network using γ-rays as an initiator, energy source and crosslinker at the same time. Nine different samples of superabsorbent hydrogels were prepared in various conditions from kappa-carrageenan (κC) and acrylamide by γ-irradiation at room temperature. Considering the results of nine trials and according to analysis of variance (ANOVA), a new experimental condition with the concentrations of κC and acrylamide 1.5 g and 0.028 mol (2 g in total volume of 50 mL H2O), respectively, as well as γ-ray at the optimum total dose (7 kGy) was proposed. After preparing the desired... 

Thermal stability of Ag layer on Ti coated Si substrate for different thicknesses of the Ag layer have been studied. To do this, after sputter-deposition of a 10 nm Ti buffer layer on the Si(1 0 0) substrate, an Ag layer with different thicknesses (150-5 nm) was sputtered on the buffer layer. Post annealing process of the samples was performed in an N 2 ambient at a flow rate of 200 ml/min in a temperature range from 500 to 700 °C for 30 min. The electrical property of the heat-treated multilayer with the different thicknesses of Ag layer was examined by four-point-probe sheet resistance measurement at the room temperature. Phase formation and crystallographic orientation of the silver... 

Purpose - Dimensional accuracy analysis of wax model created by room temperature vulcanization (RTV) silicone rubber molding to be used in investment casting is presented. The purpose of this paper is to discuss the effective parameters of dimensional accuracy in RTV tooling technique. Design/methodology/approach - After producing a pattern by stereolithography (SLA) and then creating the RTV silicone rubber mold by the SLA pattern, dimensional accuracy of wax models produced by RTV tool are analyzed. Design of experiments (DOE) using the Taguchi approach is used for analysis and determination of optimum condition. Findings - Experiments show that the dimensional accuracy in RTV technique is... 

At room temperature, ZrOCl2·8H2O on montmorillonite K10 efficiently catalyzes conjugate addition of amines to a variety of conjugated alkenes such as α,β-unsaturated carbonyl compounds, carboxylic esters, nitriles and amides under solvent-free conditions. The catalyst can be recycled for subsequent reactions without any appreciable loss of efficiency. © 2005 Elsevier Ltd. All rights reserved  

Aromatic nucleophilic substitution reaction kinetics of 2-chloro-3,5-dinitropyridine with aniline was studied in aqueous solutions of methanol, ethanol, and 2-propanol at room temperature. The obtained results for aqueous solutions indicate that the second-order rate constants are in order of 2-propanol>ethanol>methanol with a maximum at water mole fraction of 0.9. The influence of solvent parameters including normalized polarity (E TN), dipolarity/polarisability (π*), and hydrogen bond donor acidity (α) on the second-order rate constants were investigated and multiple regressions gave much better results with regard to single parameter regressions. Dipolarity/polarisability and hydrogen... 

N-Benzyl-DABCO-ammonium tribromide was found to be an efficient and recyclable reagent for the deprotection of dithioacetals in dichloromethane/ methanol at room temperature. The reaction can be performed cleanly, in short time, and in high yield. Copyright © Taylor & Francis Group, LLC