Sharif Digital Repository

We have studied the electrical and magnetic properties of normal and superconducting states of RuGd1.6Ce0.4Sr 2Cu2O10-δ (Ru-1222) system, prepared by the standard solid-state reaction technique, with applied magnetic field. The resistivity curves show that at high temperature the system is paramagnetic. At lower temperature, we can observe two magnetic transitions from paramagnetic state to anti-ferromagnetic and from anti-ferromagnetic to ferromagnetic. At room temperature the resistivity of sample shows insulating behavior and superconducting transition occurs at 45 K. Superconducting and magnetic parameters such as superconducting transition temperature Tc, magnetic transition Tirr, have... 

Our previously reported mathematical model for a mixed oxide nanoparticulate-based supercapacitor containing RuO2·xH2O and MO2·yH2O (M being another suitable transition metal) was analyzed. Both double-layer and faradaic processes responsible for charge/discharge were considered. The effects of the intrinsic factors, unit cell length, state of charge, and the exchange current densities of the electrochemical processes of the constituents on the performance of the model supercapacitor were clarified. Compensation effects where each constituent compensates the shortcomings of the other at specific conditions of discharge are analyzed in the light of the model  

Investigation of the X-ray structure of the newly prepared [Ru(NO)(2,6isopPh2Aceq)Cl3] (2,6isopPh2Aceq = bis(2,6-diisopropylphenylimino)acenaphthenequinone) complex revealed for the first time the π-hole interaction involving the coordinated nitrosyl group with DMSO as the solvent of crystallization in the crystal lattice. Processing of CSD data showed only one reported structure. A significant feature of the structure is the presence of n → π∗, π → σ∗, and n → σ∗ interactions due to the coordinated nitrosyl and chloro groups and DMSO. © 2020 The Royal Society of Chemistry  

We have studied the electrical and magnetic properties of RuGd 2-xCexSr2Cu2O10-δ (Ru-1222) with content of Ce = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, prepared by the standard solid-state reaction technique. To determine how the magnetic and superconducting properties of this layered cuprate system can be affected by Ce substitution, the resistivity and magnetoresistivity have been measured at various temperatures. Resistivity curves reveal the presence of four regions for various contents of x. In high temperatures, system is paramagnetic. Magnetic transition from paramagnetic state to antiferromagnetic state occurs at 140 K for x = 0, which varies very slowly with increasing Ce substitution for Gd.... 

The Flory-Huggins (FH) model has been one of the most used models in theoretical calculations which has been proved to be sensitive to values assigned as interaction parameters. In this work, a predictive equation is implemented to implicitly couple the concept of compressible regular solution theory of Ruzette and Mayes into the original FH model to obtain a new concertation-dependent interaction parameter equation. Then, the modified model (m-FH) is applied for construction of phase diagram of ternary solutions containing polymer/solvent/nonsolvent where experimental data for ternary systems were collected from the literature. In order to compare and analyze the model performance, the... 

In the present research, we investigate the synergistic effects of Ru-doping and Ar/H2 reduction treatment on the photoelectrochemical water splitting performance and hydrogen evolution rate of TiO2 nanotube array photoelectrodes. The Ti-Ru alloy with 0.2 at. % Ru was used to grow anodic self-organized Ru-doped TiO2 nanotube layers. An ideal synergy between Ar/H2 reduction treatment and Ru-doping results in the extended absorption toward the visible light region and improved photoelectrocatalytic activity. The black Ru-doped TiO2-x photoanode's water splitting rate improves remarkably (∼ninefold) compared to the black TiO2-x sample (∼twofold). Moreover, the black Ru-doped TiO2-x photoanode... 

Synthesizing efficient electrode materials for water splitting and supercapacitors is essential for developing clean electrochemical energy conversion/storage devices. In the present work, we report the construction of a ruthenium cobalt oxide (RuCo2O4)/Ti3C2Tx MXene hybrid by electrophoretic deposition of Ti3C2Tx MXene on nickel foam (NF) followed by RuCo2O4 nanostructure growth through an electrodeposition process. Owing to the strong interactions between RuCo2O4 and Ti3C2Tx sheets, which are verified by density functional theory (DFT)-based simulations, RuCo2O4/Ti3C2Tx MXene@NF can serve as a bifunctional electrode for both water splitting and supercapacitor applications. This electrode... 

Ruthenium oxide was coated on multiwalled carbon nanotubes (MWCNTs) to obtain nanocomposite electrode which has a good response to the pH. To synthesize this electrode, gold and cobalt were coated on a stainless steel 304 substrates, respectively, and then, vertically aligned carbon nanotubes were grown on the prepared substrates by chemical vapor deposition. Gold reduced activity of the stainless steel, while cobalt served as a catalyst for growth of the carbon nanotube. Ruthenium oxide was then coated on MWCNTs via sol-gel method. At last, different techniques were used to characterize the properties of synthesized electrode including scanning electron microscopy (SEM), transmission... 

We have investigated the effect of Ca substitution for Sr site on structural, magnetic and superconducting properties of RuSr2 -x CaxGd1.4Ce0.6Cu2O10 -δ system. In this system, the magnetic coupling of RuO 2 and CuO 2 plays an important role in magnetic and superconducting states. X-ray diffraction analysis shows that all samples are single phase and the lattice parameters decrease continuously by increasing Ca content. The onset superconducting transition temperature is found to decrease with Ca substitution. As Ca content increases, rotation of the RuO 6 octahedron increases and RuO(1)Ru angle decreases. These variations strengthen the magnetic moments in the RuO 2 planes. The enhancement... 

We have investigated the role of electron-electron correlation in SrRuO 3 and CaRuO 3 bulk structures. At first, the DOS of SrRuO 3 and CaRuO 3 is obtained using the full potential linearized augmented plane wave method by LSDA. We have then calculated the electronic structure, dielectric function, self-energy, and spectral function for the bulk SrRuO 3 and CaRuO 3 by GWA. The shifting of the Ru t 2g orbitals, broadening in Ru valance bands, and also the enhancement in exchange splitting shows better agreement between the GWA many-body correction with the bulk experimental results. But, in spite of the many-body correction, the GWA results is not completely consistent with the PES... 

A mathematical model was developed to describe the performance of nanoparticulate mixed oxide pseudocapacitors based on RuO 2-MO 2 (M being another suitable transition metal) under galvanostatic charge/discharge regime. Both double layer and faradaic processes were taken into account. The effects of the active material's particle size and composition were examined. Furthermore, the influence of discharge current on the extents of double layer and faradaic contributions was analyzed. The model analysis showed that the energy density declined upon increasing the volume fraction of larger particles. © 2008 Springer-Verlag  

Developing effective and priceless electrocatalysts is an indispensable requirement for advancing the efficiency of water splitting to get clean and sustainable fuels. Herein, we reported a feasible strategy for preparing a trimetallic (NiCoFe) superior electrocatalyst with a novel open-cage/3D frame-like structure for an oxygen evolution reaction (OER). It is prepared by consequent thermal treatments of a CoFe Prussian blue analogue frame/cage-like structure under an argon (CoFeA-TT) atmosphere and then electrochemical deposition of nickel-cobalt sulfide nanosheets as a shell layer on it. The electrochemical measurements demonstrated that the deposition of NiCo-S on CoFeA-TT... 

Nowadays, there is a growing interest in synthesizing electrodes used in zinc electrowinning, increasing active surface area, decreasing specific energy consumption, and the oxygen evolution reaction (OER) overpotential. In this study, modified nanocomposite anodes were synthesized by applying pulsed and constant direct current electrodeposition to improve the catalytic activity of the electrodes toward the oxygen evolution reaction (OER) and reduce energy consumption in zinc electrowinning. By decreasing particle size, the active surface area of PbO2-RuO2 nano-mixed composite electrode was 2.88 and 14.22 times greater than PbO2-RuO2 microcomposite and pure PbO2 electrodes, respectively.... 

Nonprecious and effective electrocatalyst development is an essential requirement for boosting water-splitting efficiency to obtain clean and sustainable fuels for future renewable energy demands. Herein, we reported an ultrafast and feasible strategy for constructing an S-doped bimetallic iron/nickel oxy(hydroxide) (S-(Fe/Ni)OOH) as a superior electrocatalyst for oxygen evolution reaction (OER). It is prepared by consequent electroplating of nickel nanocone arrays (NiNCAs) on carbon cloth (CC) and stainless-steel mesh (SSM) and then formation of S-(Fe/Ni)OOH layers on them by ultrafast one-step oxidation solution-phase method in the solution of Fe3+ and sodium thiosulfate at room... 

Zeolitic imidazole frameworks (ZIFs) provide an exciting platform to design and fabricate non-precious-metal carbon-based catalysts for oxygen reduction/evolution reaction (ORR/OER). Herein, we elaborately design a facile enzyme-assisted synthetic strategy that enables to tailor the ZIFs precursors into structural stable decussation shape, which derived Co nanoislands grafted on decussate N-doped carbon nanoleaves (D-Co@NC) can well retain the interpenetrating nanostructure. Benefiting from the combined advantages of compositions and interpenetrating nanostructures, D-Co@NC possesses 5.2 times higher exposed electrochemical active area than the conventional dodecahedral one, thus endowing... 

Developing extremely efficient electrocatalysts for oxygen evolution reactions (OER) is a decisive step toward the progression of rechargeable metal-oxygen batteries, CO2 reduction, and water-splitting. Nanoporous high-entropy transition-metal sulfides (np-HETMS) represent a new generation of promising OER catalysts by virtue of their exceptional catalytic activity. However, their synthesis maintains to be a challenge by reason of the thermodynamic immiscibility of the constituting multi-principal metallic elements in the sulfide structure. Herein, for the first time, the np-HETMS ((CoFeNiMnCu)S2) nanoparticles with pyrite-phase was synthesized via a facile and easy adaptable... 

Increasing energy demands for pollution-free and renewable energy technologies have stimulated intense research on the development of inexpensive, highly efficient, and stable non-noble metal electrocatalysts for oxygen evolution reaction (OER). In this study, a superior OER performance was achieved using a tri-metallic (Zn, Co, Ni) high-performance electrocatalyst. We successfully fabricated a peony-flower-like hierarchical ZnCo2O4 through an additive-free hydrothermal reaction followed by heat treatment. Then NiCo-LDH (layered double hydroxides) nano-flakes was electrodeposited on the ZnCo2O4/GCE surface to prepare NiCo-LDH/ZnCo2O4/GCE which was used as electrode for OER. The structure and... 

Exploring bi-functional electrocatalysts with excellent activity, good durability, and cost-effectiveness for electrochemical hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte is a critical step towards a sustainable hydrogen economy. Three main features such as high density of active sites, improved charge transfer, and optimized electronic configuration have positive effects on the electrocatalyst activity. In this context, understanding structure–composition–property relationships and catalyst activity is very important and highly desirable. Herein, for the first time, we present the design and fabrication of novel MOF-derived ultra-small Ru/RuO2 nanoparticles...