Sharif Digital Repository

We have used molecular dynamics simulation to investigate hydrophilic– hydrophobic interfaces between calcium chloride (CaCl2) aqueous solutions and normal hexane. The results demonstrate the increasing impact of salt concentration on the liquid–liquid interfacial tension, hence, negative adsorption of CaCl2 according to Gibbs adsorption isotherm. Moreover, we calculated the density profiles of hexane, water, and the counter ions. The results reveal an electrical double layer near the interface and the less affinity of calcium cations toward the interface than that of chloride anions. Orientation of water molecules at the studied concentrations may result in developing a positively charged... 

A CFD code has been developed to describe the salt solution density current, which propagates three-dimensionally in deep ambient water. The height and width of the dense layer are two dominated length scales in a 3-D structure of the density current. In experimental efforts, it is common to measure the height and width of this current via its brightness. Although there are analytical relations to calculate the current height in a two-dimensional flow, these relations cannot be used to identify the width and height of a 3-D density current, due to the existence of two unknown parameters. In the present model, the height and width of the dense layer are obtained by using the boundary layer... 

A novel hydrolyzed collagen-based hydrogel has been prepared by grafting the binary mixture of acrylamide and 2-acrylamido-2-methylpropanesulfonic acid onto the collagen backbone in the presence of a cross-linking agent. Its physicochemical properties in aqueous solution were studied. The effect of reaction variables on both gel content and swelling capacity was investigated to achieve a hydrogel with improved absorbency and gel content. The absorbency under load of optimized hydrogel was also investigated by using an absorbency under load tester at various applied pressures. The swelling ratio in various salt solutions was also determined and additionally, the swelling of hydrogels was... 

In this study, we have investigated the bioleaching potential of a native strain of Acidithiobacillus ferrooxidans isolated from zinc and lead sulfide mines under varied ambient conditions of growth and substrate consumption. The effects of intermittent irrigation, type of agglomeration, feed formulation in terms of acid, enriched salt solution, initial number of microorganism, and their interactions on the bioleaching of low-grade zinc sulfide ores (containing 5.78% zinc) on growth and biooxidation efficiency of the bacteria have been evaluated. Bioleaching capacities of the isolate were optimized by the utilization the Taguchi method (e-qualitic-4) for design of experiments. As a result,... 

Retention of lead(II) ions on a polyamide nanofiltration membrane was investigated. Effects of different factors including operating pressure, lead ion concentration, anion nature, pH and composition of feed on the lead ion rejection were studied. The solutions used consisted of Pb(NO3)2, PbCl2 and PbSO4 in the single-salt solution system and Pb(NO3)2, Cu(NO3)2, Zn(NO3)2, Cd(NO3)2, NaNO3 and NH4NO3 in the binary-salt solution system. The influence of divalent and monovalent cations including cadmium, copper, zinc, sodium and ammonium on the rejection of lead ion was examined. The transmembrane pressure and lead ion concentration varied between 10 and 40bar and 20 and 400mg Pb2+/L,... 

Novel polyampholytic superabsorbing nanocomposites based on the zwitterionic sulfobetaine monomer [3-(methacrylamido)propyl)]dimethyl(3- sulfopropyl)ammonium hydroxide were synthesized through in situ polymerization in aqueous solution with different contents of an organo-modified clay (OMMT, Cloisite 30B). Structural and thermomechanical properties of hydrogels were characterized by FT-IR, XRD, and DMTA, respectively. Swollen gel strength of hydrogels was determined by a rheological method. Storage modulus of the hydrogels was considerably improved in comparison with its the clay-free counterpart. The nanocomposite hydrogel containing 15% OMMT possessed the highest gel strength. The glass... 

Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with Polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslink-ing and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

In this study, the impacts of salinity, ion type, and aging process were investigated on coalescence and spreading of crude oil interfaces (including an oil droplet and an oil film) under gravity, through drop rest time measurement techniques, aided by an image analysis system. Three different salt solutions of NaCl, Na2SO4, and MgCl2 were studied at different ionic strengths, ranged from 1% to 150% of Persian Gulf seawater ionic strength. According to the results, aging the oil droplet in the brine increased the interfacial rigidity. Addition of a gas phase - by thinning the surface oil film - almost doubled both rest time and spreading time values. In the aged mode, the presence of salt in... 

The synthesis of a novel superabsorbent hydrogel with natural hybrid backbone via graft copolymerization of acrylamide (AAm) onto kappa-carrageenan (kC, as a polysaccharide) and gelatin (as a protein) under classic thermal conditions is described. The Taguchi method as a strong experimental design tool was used for synthesis optimization. A series of hydrogels were synthesized by proposed conditions of Qualitek-4 Software. Considering the results of 9 trials according to analysis of variance (ANOVA), optimum conditions were proposed. The swelling behavior of optimum hydrogel was measured in various solutions with pH values ranging from 1 to 13. In addition, swelling kinetics, swelling in... 

A series of biopolymer-based superabsorbent hydrogels based on carboxymethyl cellulose has been prepared by free-radical graft copolymerization of acrylamide and 2-acrylamido-2-methylpropan sulfonic acid (AMPS) in aqueous solution using methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator. The effect of variables on the swelling capacity such as: acrylamide/AMPS weight ratio, reaction temperature, and concentration of the initiator and crosslinker were systematically optimized. The results indicated that with increasing the amount of AMPS, the swelling capacity is increased. FT-IR spectroscopy and scanning electron microscope analysis were used to confirm... 

Density Current is formed when a fluid with heavier density than the surrounding fluid flows down an inclined bed. These types of flows are common in nature and can be produced by; salinity, temperature inhomogeneities, or suspended particles of silt and clay. Driven by the density difference between inflow and clear water in reservoirs, density current plunges clear water and moves towards a dam, while density current flows on a sloping bed. The vertical spreading due to water entrainment has an important role in determining the propagation rate in the longitudinal direction. In this work, two-dimensional steady-state salt solutions' density currents were investigated by means of...