Loading...
Search for:
sessile-drops
0.005 seconds
An investigation on the wetting of polycrystalline alumina by aluminium
, Article Journal of Materials Processing Technology ; Volume 197, Issue 1-3 , 2008 , Pages 156-160 ; 09240136 (ISSN) ; Halali, M ; Sharif University of Technology
2008
Abstract
In this report, sessile drop technique was employed to study the wetting of alumina by pure aluminium. Contact angle of pure aluminium on the surface of polycrystalline alumina substrate was studied in the temperature range of 750-1100 °C. Electron microscopy and EDX analysis were employed to examine the possible reactions at the melt-substrate interface. It was found that at temperatures in excess of 1050 °C molten aluminium can wet alumina. No reaction layer was detected at the Al/Al2O3 interface. © 2007 Elsevier B.V. All rights reserved
Wettability alteration modeling for oil-wet calcite/silica nanoparticle system using surface forces analysis: contribution of DLVO versus non-DLVO interactions
, Article Industrial and Engineering Chemistry Research ; Volume 57, Issue 43 , 2018 , Pages 14482-14492 ; 08885885 (ISSN) ; Ghazanfari, M. H ; Kazemeini, M ; Jamialahmadi, M ; Helalizadeh, A ; Sharif University of Technology
American Chemical Society
2018
Abstract
In this work, application of silica nanoparticles for wettability alteration of initially oil-wet calcite was investigated through analysis of surface forces and DLVO theory. Doing so, the wettability and zeta potential of calcite surfaces were measured through the sessile drop method and an in-house experimental setup, respectively. Primary evaluation indicated that incorporating DLVO terms in the Frumkin-Derjaguin model was not sufficient to describe the wettability in an oil-wet calcite/nanofluid system. Sensitivity analysis showed that calculating the double-layer interaction using constant potential-constant potential boundaries along with structural hydrophobic forces (non-DLVO...
Effect of magnesium addition on the wetting of alumina by aluminium
, Article Applied Surface Science ; Volume 255, Issue 19 , 2009 , Pages 8202-8206 ; 01694332 (ISSN) ; Halali, M ; Sharif University of Technology
2009
Abstract
In this report the wetting behaviour between polycrystalline alumina substrates and molten aluminium doped with magnesium as a wetting agent has been studied using the sessile drop technique. The time required for equilibrium attainment is investigated. To explore the formation of possible phases at the interface, electron microscopic studies along with EDX analysis have been employed. It is found that magnesium reduces the time and temperature required for equilibrium in the Al/Al2O3 system. The Al-7 wt% Mg and Al-10 wt% Mg alloys can wet alumina at temperatures as low as 900 °C. It is also found that molten aluminium doped with magnesium can wet polycrystalline alumina at temperatures...
Monitoring wettability alteration by silica nanoparticles during water flooding to heavy oils in five-spot systems: A pore-level investigation
, Article Experimental Thermal and Fluid Science ; Vol. 40, issue , July , 2012 , p. 168-176 ; ISSN: 08941777 ; Mohammadi, S ; Ghazanfari, M. H ; Kharrat, R ; Masihi, M ; Sharif University of Technology
Abstract
It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent...
Monitoring wettability alteration by silica nanoparticles during water flooding to heavy oils in five-spot systems: A pore-level investigation
, Article Experimental Thermal and Fluid Science ; Volume 40 , July , 2012 , Pages 168-176 ; 08941777 (ISSN) ; Mohammadi, S ; Ghazanfari, M. H ; Kharrat, R ; Masihi, M ; Sharif University of Technology
2012
Abstract
It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent...
Pore-Scale Monitoring of Wettability Alteration by Silica Nanoparticles During Polymer Flooding to Heavy Oil in a Five-Spot Glass Micromodel
, Article Transport in Porous Media ; Volume 87, Issue 3 , 2011 , Pages 653-664 ; 01693913 (ISSN) ; Mohebbi, A ; Kharrat, R ; Ghazanfari, M. H ; Sharif University of Technology
Abstract
It is well known that the oil recovery is affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of medium surfaces has remained a topic of debate in the literature. Furthermore, there is a little information of the way dispersed silica nanoparticles affect the oil recovery efficiency during polymer flooding, especially, when heavy oil is used. In this study, a series of injection experiments were performed in a five-spot glass micromodel after saturation with the heavy oil. Polyacrylamide solution and dispersed silica nanoparticles in polyacrylamide (DSNP) solution were used as injected fluids. The oil recovery as well as fluid distribution in...