Sharif Digital Repository

Investigating the parameters influencing the behavior of buried pipelines under dynamic loading is of great importance. In this study the soil structure interaction of the pipelines with the surrounding soil was addressed using shaking table tests. Wave propagation along the soil layers was also included in the study. The semi infinite nature of the field was simulated using a laminar shear box. The soil used in the experiments was Babolsar coastal sand (Iran). PVC pipes were used due to their analogy with the field. Eight models were constructed with the first four models having uniform base. In the next models, the non-uniformities of real ground were simulated using a concrete pedestal... 

This paper studies the influence of burial depth on slope response and pipe performance under earthquake induced landslide. Three physical models are constructed and tested using 1 g shaking table device. The slope is divided into four sections as toe, lower and upper sections of the slope face and crest. The pips which perpendicularly cross the slope are embedded at these positions in three burial depths to demonstrate burial depth effect in each section. According to the experiments, dynamic slope response which moderately develops at deeper depths at toe and lower section, displays a clear downtrend at upper section and crest. Also, the pipe response depends on pipe route and slope... 

Liquefaction-induced lateral spreading caused severe damages to pile foundations during past earthquakes. Micropiles can be used as a mitigation strategy against lateral spreading e ects on pile foundations. However, the available knowledge about the possible efficiency of this strategy is quite limited. In this regard, the present study aims to evaluate the e ectiveness of a vertical micropile system as a lateral spreading countermeasure using large-scale 1 g shake table tests on 3 x 3 pile groups. The results showed that the micropile system was not able to e ectively reduce the bending moments in piles; however, it considerably reduced the lateral soil pressures exerted on the upslope... 

In this paper, different aspects of the behavior of 2×2 pile groups under liquefaction-induced lateral spreading in a 3-layer soil profile is investigated using large scale 1g shake table test. Different parameters of the response of soil and piles including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in the paper. In addition, distribution of lateral forces due to lateral spreading on individual piles of the groups is investigated in detail. The results show that total lateral forces on the piles are influenced by the shadow effect as well as the superstructure mass attached to the pile cap. It was also found that... 

Liquefaction-induced lateral spreading has imposed severe damages to many important structures supported on pile foundations during past earthquakes. As a result, evaluation of pile response to lateral spreading is an important step towards safe and resistant design of pile foundations against this destructive phenomenon. Current paper aims to study the response of a group of piles subjected to liquefaction-induced lateral spreading using a large scale 1-g shake table test. General test results including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in this paper. In addition, distribution of lateral soil pressure on... 

This paper presents the results of a series of shake table tests carried out on a half-scale single-story unreinforced masonry building with asymmetric openings. First, the unretrofitted building is subjected to seven increasing steps of bidirectional seismic excitation. The damaged building is then rehabilitated using steel mesh and shotcrete layer with two walls retrofitted from the exterior face and the other two from the interior face. Afterward, the shake table test is again conducted on the retrofitted specimen in nine increasing excitation levels. Three cases of interior-to-interior, interior-to-exterior, and exterior-to-exterior shotcrete connections are considered at the... 

In this paper the relation between dissipated energy and pore pressure is studied using 1 g shaking table test results. Toyoura sand is used for the physical models. Both one and two dimensional variable phase loadings are applied to the models. Shear work was calculated using accelerations and displacements and normalized to the mean effective stress. Pore water pressure was also normalized to the vertical effective stress. The results show that the pore pressure has a unique relationship to the shear work no matter whether the shaking is one or two dimensional. The results also show that the generated normalized pore pressure is independent of loading type and confinement. © 2006 Taylor &... 

In this paper the dynamic properties of Babolsar dry sand was investigated through one dimensional shaking table tests. 8 models of Babolsar loose dry sand under low confining pressures, were subjected to different harmonic and irregular dynamic loadings. The container was a laminar shear box having 24 layers each moving on the lower one. The dynamic properties including shear wave velocity, maximum shear modulus and damping ratio of the samples were addressed in this project. © 2006 Taylor & Francis Group, London  

In order to evaluate the seismic behavior of confined masonry buildings, based on Iranian seismic code design, a single storey full-scale unreinforced confined brick masonry building has been constructed on the shaking table facility at the Earthquake Engineering Research Center (EERC) of Sharif University of Technology. The 4 by 4 meter model consists of four brick masonry walls confined with reinforced mortar tie-columns and steel bond beams, with a traditional jack-arch roof system. Three of the wall panels contained openings of different sizes and geometries. The model was subjected to the scaled earthquake records of Bam, Tabas and El Centro, as well as a harmonic acceleration with... 

This paper presents the results of an experimental work in order to evaluate the performance of a novel proposed retrofitting technique on a typical dome-roof adobe building by shaking table tests. For this purpose, two specimens, scaled 2:3, were subjected to a total of nine shaking table tests. The unretrofitted specimen, constructed by common practice, is designed to evaluate seismic performance and vulnerability of dome-roof adobe houses. The retrofitted specimen, exactly duplicating the first specimen, is retrofitted based on the results obtained from unretrofitted specimen tests, and the improvement in seismic behavior of the structure is investigated. Zarand earthquake (2005) Chatrood... 

The effects of liquefaction induced lateral spreading on the piles of a dolphin-type berth were investigated using 1 g large scale shake table testing accompanied by numerical simulations. For this purpose, various aspects of the response of the soil and the pile group to lateral spreading were considered. The results indicated that large bending moments were induced in the piles during lateral spreading and the downslope piles of the group received greater bending moments than the upslope one. The monotonic components of bending moments in the piles were reasonably predicted by the displacement based numerical approach using p-y springs when they were properly tuned for strength reduction... 

The seismic responses of steel water tanks are unconventional given their complex dynamic behavior and the sources of nonlinearity. Therefore, providing a reliable, finite-element model is instrumental in better understanding their dynamic behavior and improving the design conditions. This paper aims to evaluate the seismic performance of steel water tanks using shaking table tests and provide a finite-element reference model for simulating real-size, semi-anchored water tanks by conducting a series of large-scale tests in the Shaking Table Lab of the Sharif University of Technology (SUT). Since scaling the tank requires a difficult process involving changing the liquid density, this paper...