Sharif Digital Repository

Many bitumen reservoirs contain shale layers of varying thickness, lateral extent, and frequency. These shale layers, depending on their size, vertical and horizontal locations, and continuity throughout the reservoir, may act as a flow barrier and severely reduce vertical permeability of the pay zone and slow down the steam-assisted gravity drainage steam chamber development. Therefore, to improve productivity in these reservoirs, understanding of the effects of reservoir heterogeneities has become necessary. This work presents numerical investigation of the effects of shale barriers on steam-assisted gravity drainage performance when applied to produce mobile heavy oil. The most concern of... 

This work concerns a fundamental understanding of how heterogeneities induced by flow barriers and connate water affect the displacement efficiency of polymer floods, which has rarely been studied in the available literature. Here, a series of water/polymer injection experiments to heavy oil performed on five-spot glass micromodels containing randomly distributed shale structures is presented. It has been found that macroscopic efficiency of polymer flooding majorly depends on flow barriers distribution/configuration; shale content and geometrical characteristics; presence of connate water and wettability of medium. Microscopic pictures revealed that the main parts of connate water were... 

Plenty of oil reservoirs contain discontinuous shale layers that act as flow barriers. Therefore, understanding their influences on reservoir performance, especially during enhanced oil recovery (EOR) processes, is of great importance. For this purpose, several experiments of water and alkaline-surfactant-polymer (ASP) flooding have been performed on a number of one-quarter five-spot micromodels that contain various configurations of shale layers to simulate shaly porous media. Several features, such as various shale geometrical characteristics and the presence of connate water saturation, were investigated at both macro- and micro-scales. The presence of shales resulted in earlier... 

Changes of morphological parameters of oil shale under thermal conditions are investigated. Analyses are based on 26 micro-computed tomography (micro-CT) images of Green River immature shale rock available under creative commons license. Several image processing and characterization algorithms are applied to sequential high-resolution micro-CT images of oil shale samples undergoing pyrolysis. Pore-scale morphology is extracted and quantified, providing results for pore size, throat size, grain size, specific surface, coordination number, and fracture aperture. The results demonstrate critical increases of porosity, coordination number and fracture aperture in the temperature range from 390... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Biosurfactant production from two indigenous consortia has already been investigated in two previous studies. In this study, comparison and modification of those models for having as much biosurfactant as possible was conducted. After characterization of bacteria by biochemical tests and 16S ribotyping, a fully modification on the final models was presented. Response surface methodology has the ability to investigate the liability of the parameters and models by the help of Desirability mode and R2 coefficient in Design Expert software. Our models in the previous works follow the style of (y=f(A,B,. . .)) and two Desirability of 0.968 and 0.996 for Paenibacillus alvei ARN63 and Bacillus... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

Using whole cell as a catalyst of enzymatic transesterification is a method to produce biodiesel with fewer drawbacks and at a lower cost. In the present study, biodiesel was produced by the reaction of waste frying oil with methanol in the presence of Rhizopus oryzae PTCC 5174 in both immobilized and free forms. Effect of four influencing factors including temperature, methanol to oil molar ratio, amount of biomass, and shaking speed was investigated. Response surface methodology was used to find the optimum conditions of the transesterification reaction. Each factor was set at three levels and the yield of the biodiesel was considered as the response. A quadratic equation was well-fitted... 

The requirement of reliable relative permeability data is more intensified when the miscibility condition approaches. In this work the relative permeability of CO2 and oil has been measured at different miscibility conditions using conventional methods. Fractured dolomite and sandstone core plugs samples were used in the experiments. Due to some errorful assumptions of conventional methods such as immiscible, incompressible displacement, inverse modeling was used for predicting the reliable relative permeability of oil and gas phases at near miscible condition from measured oil production and pressure drop data. The initial guesses of relative permeabilities were provided from conventional... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

Almost all of the heavy oil reservoirs contain discontinuous permeability barriers (shales) with different structures. However, the effect of shaly layer geometrical characteristics including: spacing from wells, discontinuity, orientation, shaly layers' spacing and length, and heterogeneous distribution on oil recovery factor in the presence of gravity force are not well understood. In this work, a series of solvent injection experiments were conducted on various vertical one-quarter five-spot glass micromodels, containing barriers, which were initially saturated with a heavy oil sample. The oil recovery was measured by analysis of the pictures provided continuously during the injection... 

The interfacial tension (IFT) of a crude oil/CO2 system is recognized as the main property affecting the efficiency of CO2 flooding during an enhanced oil recovery (EOR) process. The addition of a paraffin group hydrocarbon to asphaltenic crude oils as an asphaltene precipitant component is aimed to mimic the asphaltene precipitation process during crude oil production and transportation. Asphaltene precipitation would critically affect the interfacial behavior of crude oil/CO2 systems. In the first part of this study, the equilibrium densities of oil samples which contain n-heptane at different ratios were measured over varying pressures at 323 K. Then, the equilibrium IFT between CO2 and... 

In this article, the transesterification of waste cooking oil (WCO) to biodiesel fuel (BDF) has been studied using KOH loaded on millimetric γ-Al2O3 particles in a novel type of two-impinging-jets reactor (TIJR). The effects of various parameters such as KOH loading (wt %), catalyst loading, and methanol-to-oil molar ratio on the BDF yield were studied. The catalyst particles with a KOH loading of 25 wt % at appropriate reaction conditions (i.e., catalyst loading = 4 wt % and methanol-to-oil molar ratio = 15:1) and at 65 °C were used in the TIJR. The influences of various operating and design parameters such as jet Reynolds number value, feed flow rate, jet diameter, and the internozzle...