Sharif Digital Repository

In this study, a new method is proposed to evaluate the utility harmonic impedance and the harmonics responsibilities at the point of common coupling. The former task is accomplished by involving the harmonic phase angles in the data correlation method, and the latter one is done using an approach based on the fluctuation of the background harmonic voltage. An important advantage of the method is to take the load harmonic impedance into account in appropriate manner. The performance of the proposed method is verified using simulation studies for different cases and also field measurements. Long-term measurement data are used to determine the harmonic contribution of the industrial customers... 

Vapour extraction (VAPEX), a newly developed heavy oil recoveiy (HOR) method, has been extensively studied, both theoretically and experimentally, in conventional sandstone models. However, the applicability of this process to naturally fractured reservoirs has not yet been addressed. The objective of this work is to evaluate the effects of fractures' geometrical properties, such as orientation, length of extension, discontinuity in both the upper well region (UWR) and the far well region (FWR) and vertical fracture location on VAPEX performance. Additionally, the effects of horizontal and vertical fracture dispersion in various density, dispersion scheme and networking on the performance of... 

An inverted organic solar cell (IOSC) with nanograting array as anode of the cell has been simulated and analyzed using a combined electrical and optical approach. We have used finite difference time domain (FDTD) method for optimizing device structure. We have compared the characteristics of the IOSC with grating structure with a reference IOSC without grating structure. As a result, an improvement of 11% and 26% in power conversion efficiency (PCE) and short circuit current (JSC) compared to the reference structure was achieved. An analysis is provided on the origin of reduced fill factor (FF) in the IOSC with grating structure. We also have discussed about disadvantage of using optical... 

Hybrid nanoliquids comprise of better physical strength, mechanical resistance, thermal conductivity, and chemical stability as equated to individual nanoliquids. The present work investigates the MHD laminar flow, containing hybrid nanoparticles, with heat transfer phenomenon over a stretching sheet immersed in a porous medium. The effect of induced magnetic field has also been taken into account. The flow model PDEs are rehabilitated into ordinary ones using a persuasive tool of similarity variables. The analogous system of dimensionless equations alongside the boundary conditions is numerically treated with the Successive-Over-Relaxation (SOR) technique. Flow and heat transfer aspects of... 

Hybrid nanoliquids comprise of better physical strength, mechanical resistance, thermal conductivity, and chemical stability as equated to individual nanoliquids. The present work investigates the MHD laminar flow, containing hybrid nanoparticles, with heat transfer phenomenon over a stretching sheet immersed in a porous medium. The effect of induced magnetic field has also been taken into account. The flow model PDEs are rehabilitated into ordinary ones using a persuasive tool of similarity variables. The analogous system of dimensionless equations alongside the boundary conditions is numerically treated with the Successive-Over-Relaxation (SOR) technique. Flow and heat transfer aspects of... 

In recent years, there has been a growing interest in the simulation and analysis of piezoelectric transducers with the he help of equivalent electrical circuit simulations (EECS). This paper has been devoted to study of such approach for two designed and fabricated ultrasonic sandwich transducers. By using analytical analysis, the dimensions of components of the two piezoelectric transducers were determined for the assumed resonance frequencies of 30 kHz and 40 kHz. Then, by using a two dimensional finite element model, and regarding two different modeling techniques for the transducers and by application of a current source which was connected directly to the piezoelectric pieces of the... 

Today's technology is going to be switched to power electronics equipment due to their wide applications in industries. Their development is too fast since the electronic and microprocessor technology promoted together, which play a significant role in this issue. In this paper, a novel boost converter with an h-bridge auxiliary LCC resonant circuit which provides soft switching technique to the converter is introduced. Then different modes of its operation are investigated and key parameters of the converter are extracted. Finally, simulation analyses are carried out to validate each mode's equation. In this study, the proposed structure of auxiliary circuit permits converter to work in... 

Various fracture geometrical properties such as orientation, extension, discontinuity, dispersion, location, and networking were investigated. Results indicate improved oil recovery and sweep efficiency in the presence of vertical fractures. Longer vertical fractures seemed to have even more beneficial effects. Horizontal fractures revealed detrimental effects on oil recovery and the performance became worse for longer horizontal fractures. Discontinuous horizontal fractures caused a better performance especially when combined with continuous vertical fractures (networking). Vertical fractures helped the growth of the steam chamber in the vertical direction, which resulted in higher oil... 

The aim of the present work is to evaluate the effect of fractures geometrical properties such as orientation, density, location, and networking on the conventional fire flooding (CFF) process performance through simulation analysis. Combustion parameters of a fractured low-permeable carbonate heavy oil reservoir in Iran called Kuh-E-Mond (KEM); applied for simulation study and simulator has been validated with KEM combustion tube experimental data. The validated model was modified to study CFF in 3D semi-scaled combustion cells. Simulation results confirmed that CFF is more feasible in the case of densely fractured reservoirs such as those in the Middle East  

The top-down in situ combustion (ISC) involves the stable propagation of the combustion front from the top vertical injector to the bottom horizontal producer. Apart from laboratory studies in conventional sandstones, no application of the process in fractured carbonates has been addressed yet. The authors modified a successful combustion tube history matched model of an Iranian low-permeable heavy oil reservoir called Kuh-E-Mond to investigate the feasibility of ISC in fractured carbonate reservoirs mimicking block-scale combustion cells. Effects of fractured geometrical properties such as orientation, location, extension, density, spacing, and dispersion were considered. Results confirmed... 

In this paper we investigate multi-path transmission of video over Wireless Multimedia Sensor Networks (WMSNs). Our objective is to provide a transmission mechanism to improve the video quality perceived at the receiver while considering energy, bandwidth and delay constraints of the network. Our approach is based on packet and path priority scheduling in multipath video transmission over WMSN. Video packets are classified according to their types and more important packets are transmitted through paths with better conditions. Path conditions are evaluated by a score mechanism using variant parameters such as free buffer size, energy, hop count and packet loss. Since path conditions are... 

A dense monitoring network is vital for the reliable assessment of PM10 in different parts of an urban area. In this study, a new idea is employed for the re-construction of the 20 shut-down PM10 monitoring stations of Berlin. It endeavours to find the non-linear relationship between the hourly PM10 concentration of both the still operating and the shut-down PM10 monitoring stations by using a fuzzy modelling technique, called modified active learning method (MALM). In addition, the simulations were performed by using not only raw PM10 databases but also log-transformed PM10 databases for skewness reduction. According to the results of hourly PM10 simulation (root mean square error about... 

The Vapour Assisted Petroleum Extraction (VAPEX) process, a newly developed Enhanced Heavy Oil Recovery process, is a promising EOR method for certain conventional non-fractured heavy oil sandstone reservoirs such as those in Canada, but its applicability on low permeable Naturally Fractured Reservoirs (NFR) such as those in the Middle East and Persian Gulf still remained as a question. Previous studies show that the foremost concern for VAPEX application in the case of NFR is the low non-economical production rates. The aim of the present work is to study the effect of fractures geometrical properties such as orientation (vertical or horizontal), density, spacing, location and networking on...