Sharif Digital Repository

Na3MnCO3PO4 (NMCP) is considered one of the promising cathode materials for sodium-ion batteries due to its high theoretical capacity. The hydrothermal method is an efficient, environmental-friendly, and simple route with low instrument cost to prepare active cathode materials such as NMCP. In this research, magnetic stirring was applied to promote the hydrothermal synthesis, and NMCP was produced by controlling different stirring times. This method results in the formation of pure NMCP upon only 45 min processing time. According to the ICP results, the Na to Mn ratio in the NMCP approached the stoichiometric value of 3 by prolonging the stirring time. By analyzing the charge-discharge... 

Na3MnCO3PO4 (NMCP) is produced by hydrothermal synthesis for rechargeable sodium-ion battery (SIB) cathode. Mechanism of formation of NMCP was investigated by measuring the influence of time and temperature on the rate of production of the NMCP crystallites. X-ray diffraction analysis of the synthesized samples showed that MnCO3 first formed as an intermediate phase. Na3MnCO3PO4 was, however, the last phase retained after 24 h of the hydrothermal process at 120 °C. Sigmoidal shape of the crystallization curves followed the Avrami–Erofeev model which described the chemical kinetics of the Na3MnCO3PO4 formation. Respective apparent activation energies of 29.10 for nucleation and 73.91 kJ/mol... 

Na3MnCO3PO4 (NMCP) particles were synthesized via ball milling of Mn(NO3)2.4H2O, Na2HPO4.2H2O and Na2CO3.H2O powders. The particles were anchored onto reduced graphene oxide (rGO) sheets during hydrothermal reduction process under stirring. Materials produced were characterized by x-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric (TG) measurement and galvanostatic charge/discharge tests. Results showed that dissolution of ball milling products in DI water is an effective method for separation of NMCP from byproducts. Best milling time for production of pure NMCP of minimum particle... 

It has long been an aspirational goal to create artificial structures that allow fast permeation of water but reject even the smallest hydrated ions, replicating the feat achieved by nature in protein channels (e.g., aquaporins). Despite recent progress in creating nanoscale pores and capillaries, these structures still remain distinctly larger than protein channels. We report capillaries made by effectively extracting one atomic plane from bulk crystals, which leaves a two-dimensional slit of a few angstroms in height. Water moves through these capillaries with little resistance, whereas no permeation could be detected even for such small ions as Na + and Cl − . Only protons (H + ) can... 

The derivatives of glucose such as glucosamine (β-D-GlcN) and N-acetyl-D-β-glucosamine (GlcNAc) are significant in several biological systems. D-GlcN has been used widely to treat osteoarthritis in humans and animal models as well as GlcNAc has been proposed as a treatment for autoimmune diseases. The DFT/B3LYP/6–311++G (d,p) method as well as QTAIM and NBO analyses were used to the acidity values of D-GlcN and GlcNAc sugars and their complexes with alkali ions in the gas phase. The Li+, Na+ and K+ prefer bi-dentate chelate in these complexes. The computed results indicate that metal ion affinity (MIA) in GlcNAc is higher than that in D-GlcN. There are direct correlations between the MIA... 

Formation of unstable solid electrolyte interphase (SEI) layers lacking of thermal stability in non-aqueous electrolytes of rechargeable batteries is the main bottleneck for their long-life cycling, especially at elevated temperatures. Inclusion of a small dose of functional electrolyte additives into the batteries' electrolyte can be highly beneficial to surmount this issue. Of these additives, vinylene carbonate (VC) has drawn particular attention thanks to its high ability to build protective layers at anodes showing good integrity and outstanding thermal stability. In addition to its primary roles in present-day lithium-ion batteries (LIBs), VC additive has also been examined in other... 

Despite previous researches on ion-engineered waterflooding (IEWF), its underlying mechanisms are not fully understood, particularly in presence of additives, like surfactants. This paper concerned with the contribution of Ca 2+ , Mg 2+ , SO 4 2- and Na + into altering wettability of oil-wet carbonate minerals towards water preferred state. As a mechanistic study, an experiment workflow was conducted to probe the impact of ions' concentrations in SW, either with or without sodium dodecylbenzene sulfonate (SDBS) which is an anionic surfactant. At first, contact angle (CA) measurement was carried out to evaluate the degree of wettability reversal upon treating the oil-aged calcite slabs with... 

Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ∼10 μm or less (PM10) during dust storms in Ahvaz in April-September 2010. TSP and PM10 samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM10 were 1,481.5 and 1,072.9 μg/m 3, respectively. Particle concentrations during the Middle Eastern... 

Calcite is among the most abundant minerals organizing the oil reservoir formation and therefore its surface properties play a central role in the increase of the oil recovery efficiency. The effect of low-salinity water in carbonate rocks reveals that brine composition and salinity can improve the oil recovery in carbonates through wettability alteration. However, the specific mechanism for wettability changes that leads to improved oil recovery in calcite is not well understood. To obtain deeper insights at atomic level into the understanding the characteristics of the calcite-water interface, we performed classical molecular dynamics simulations in the presence of different ions in brine... 

Green biomaterials play a crucial role in the diagnosis and treatment of diseases as well as health-related problem-solving. Typically, biocompatibility, biodegradability, and mechanical strength are requirements centered on biomaterial engineering. However, in-hospital therapeutics require an elaborated synthesis of hybrid and complex nanomaterials capable of mimicking cellular behavior. Accumulation of hazardous cations like K+ in the inner and middle ear may permanently damage the ear system. We synthesized nanoplatforms based on Allium noeanum to take the first steps in developing biological porous nanomembranes for hazardous cation detection in biological media. The...