Sharif Digital Repository

TiO2 nanoparticles were synthesized by hydrothermal assisted sol-gel technique. The preparation parameters including pH value, the amount of water, titanium tetra isopropoxide content, temperature and time of hydrothermal process were investigated by Taguchi statistical experiments to determine the influence of synthesizing variables on the optimal conditions and to realize the highest degree of crystallinity or smallest crystallite size. X-ray diffraction (XRD) analysis and direct band gap energy (Eg) values, measured via diffuse reflectance spectra (DRS), proved that all the samples consist of anatase as a unique phase. Transmission electron microscopy (TEM) and specific surface area... 

The conductive CuCo2O4 spinel coating is applied on the surface of the AISI 430 ferritic stainless steel by the dip-coating sol-gel process and it is evaluated in terms of the microstructure, oxidation resistance and electrical conductivity. The results show that the CuCO2O 4 coating forms a double-layer scale consisting of a Cr, Fe-rich subscale and Cu-Co spinel top layer after 500 h in air at 800 °C. This scale is protective, acts as an effective barrier against Cr migration into the outer oxide layer and alleviates the cathode Cr-poisoning. The oxidation resistance is significantly enhanced by the protective coating with a parabolic rate constant of 5.8 × 10-13 gr2 cm-4 s -1, meanwhile... 

In this study, the crystallisation of nano hydroxyapatite (HA) films on stainless steel 316L was studied. The film was prepared by sol-gel technique. The process was started with preparation of an HA sol. After aging of the sol at room temperature, a stainless steel 316L substrate was dip coated and then was heat treated from 350 to 450°C at different periods of time in air. The crystallisation behaviour and the transformation-temperature-time diagram of HA films were achieved and analysed using the avrami equation. The results showed that the crystallisation of HA began at 250°C and was increased up to 450°C. The obtained HA film showed a nanostructure character with a suitable crystalinity... 

In this experimental study, a kinetic model has been developed for Fischer-Tropsch synthesis reactions by using sol-gel technique and Fe/Ni/Al 2O 3 as the catalyst (40% Fe/60% Ni/40 wt.%Al 2O 3) in a differential fixed-bed micro reactor assuming no internal or external diffusion. Operating conditions of the reactor were as follows: total pressure 1-12 atm; Temperature 220-260 °C; H 2/CO feed ratio 1.5-2; gas hourly space velocity 2100-7000 cm 3(STP)/h/ g cat and conversions of 6-37% of hydrogen and 7-21% of carbon monoxide. Mass transfer limitations were investigated by changing synthesis gas velocity in reactors which differ in size. Based on the hypothesis that water inhibits the intrinsic... 

Nowadays, gasochromic Pd/WO3 coatings as optically switchable materials have become more applicable for hydrogen sensors and smart windows. In this study, WO3 films were prepared by Pulsed Laser Deposition (PLD) and spin-coating sol-gel techniques. For deposition of Pd, first a layer of PdCl2 was obtained via a simple drop-drying process by dropping PdCl2 solution onto WO3 substrates and drying them at room temperature. Then Pd nanoparticles were synthesized via hydrogen gas exposure that causes reduction of the PdCl2 layer. According to Scanning Electron Microscope (SEM) observations before hydrogen reduction, many individual nanoparticles or fractal-like constructions of palladium were... 

Nitrates of lithium, cobalt and nickel are utilized to synthesize LiNi 0.8Co0.2O2 cathode material through sol-gel technique. Various synthesis parameters such as calcination time and temperature as well as chelating agent are studied to determine the optimized condition for material processing. Using TG/DTA techniques, the optimized calcination temperatures are selected. Different characterization techniques such as ICP, XRD and TEM are employed to characterize the chemical composition, crystal structure, size and morphology of the powders. Micron and nano-sized powders are produced using citric/oxalic and TEA as chelating agent, respectively. Selected powders are used as cathode material...