Sharif Digital Repository

Almost all of the heavy oil reservoirs contain discontinuous permeability barriers (shales) with different structures. However, the effect of shaly layer geometrical characteristics including: spacing from wells, discontinuity, orientation, shaly layers' spacing and length, and heterogeneous distribution on oil recovery factor in the presence of gravity force are not well understood. In this work, a series of solvent injection experiments were conducted on various vertical one-quarter five-spot glass micromodels, containing barriers, which were initially saturated with a heavy oil sample. The oil recovery was measured by analysis of the pictures provided continuously during the injection... 

In this work, a series of solvent- and water-injection scenarios were conducted on horizontal five-spot glass micromodels that were saturated initially with heavy oil. Sandstone and limestone rock look-alike and network patterns with different pore structures were used in the experiments. The results show that the ultimate oil recovery of a water-alternating-solvent (WAS) scheme was greater than that of a simultaneously water-alternating-solvent (SWAS) scheme, and the efficiency of a solvent-soak scheme also offers a greater recovery. Likewise, the WAS scheme resulted in greater oil recovery when compared with continuous solvent injection (CSI), with the same amount of solvent consumption.... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

This study concerns with the microscopic and macroscopic fluid distribution and flow behavior during water alternating solvent (WAS) injection process to heavy oil using micromodel generated from thin section of a real rock which has rarely attended in the available literature. In this study, a one-quarter five-spot glass micromodel was deployed to examine the effect of flow media topology on microscopic displacements as well as macroscopic efficiency of WAS process. The micromodel was initially saturated with the heavy oil, and then the hydrocarbon solvent and water were injected alternately into it. The observations confirmed that WAS injection scheme is an effective method for the... 

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not... 

The solvent-based process appears to be an increasingly feasible technology for the extraction of heavy oil reserves. However, there is a lack of fundamental understanding of how fracture geometrical characteristics control the oil recovery efficiency in this type of enhanced oil recovery (EOR) technique. In this work, a series of experiments were performed whereby the pure and mixed hydrocarbon solvents (HCS) displaced heavy oil in fractured five-spot glass micro-models. Successive images of the solvent injection process were recorded. The oil recovery factor, as a function of injected pore volume of solvents, was measured using image analysis of the provided pictures. It has been observed... 

Despite numerous experimental studies, there is a lack of fundamental understanding on how the chemical composition of a co-solvent at different wettability conditions might affect the pore-scale events and oil recovery efficiency in 5-spot models. In this study visualization of solvent injection experiments performed on a one-quarter five spot glass micromodel, which was initially saturated with the crude oil. One hydrocarbon solvent was considered as base, and four other groups of commercial chemicals, as well as their mixtures, were used as co-solvents. Microscopic and macroscopic displacement efficiency of solvent mixtures in both strongly water-wet and oil-wet media has been studied. It...