Sharif Digital Repository

Aim: This study evaluated serum levels of zinc in patient with CD compare to healthy subjects. Background: Celiac disease (CD) is characterized by small intestinal malabsorption of nutrients as a consequence of ingestion of wheat gluten. Zinc is an essential trace element that it has vital biological functions. Patients and methods: Sera of 30 celiac cases and 30 healthy normal cohorts as control group were obtained. Atomic absorption spectrophotometer was employed for estimating serum zinc level. Results: Zinc concentrations in patients diagnosed with CD were significantly lower than healthy subjects (75.97±12 compared with 92.83±18, P-value < 0.0001). Conclusion: The result of this study... 

In the present communication, three bimacrocyclic tweezers linked through azobenzene moiety, Ln (n = 1–3) were synthesized in a multistep route and characterized by x-ray crystallography, IR, 1H and 13C NMR, UV–vis spectroscopy as well as CHN microanalysis. UV–visible spectroscopy established that the irradiation of L1 and L3 with UV light promoted the trans to cis isomerization. Irradiating the reaction mixtures with Hg lamp, significant supramolecular interactions between L1 and L3 with C60 were also found in terms of the association constants calculated by UV–visible spectroscopy, denoting on more pronounced interaction with C60 that in the absence of UV light. The molecular structures of... 

In this article, droplet size and its distribution along a pulsed liquid-liquid extraction column, is studied where SiO2 nanoparticles with concentrations of 0.01, 0.05 and 0.1vol.% and different hydrophobicities are applied to the dispersed phase. Using ultrasonication, nanoparticles were dispersed in kerosene as the base fluid. Nanofluids' stability was ensured using a UV-vis spectrophotometer. Some 22,000 droplets were measured by photographic technique and results were compared with systems containing no-nanoparticles (Water-Acetic acid-Kerosene). Addition of nanoparticles changed the droplet shape from ellipsoidal to spherical. Also, there was a marked influence on droplet breakage and... 

Simple synthesis of silver doped TiO2 nanostructured layers by micro arc oxidation process is reported for the first time. The layers consisted of anatase and rutile phases whose characteristic XRD-peaks shifted toward lower diffraction angles when compared to the pure micro arc oxidized TiO 2 layers. Silver-doping was confirmed by XPS technique. The anatase phase crystalline size was determined as 27.6 and 21.8 nm for the layers grown under the voltages of 350 and 500 V. Employing a UV-Vis spectrophotometer, a red shift in the absorption edge of the layers was observed when silver was incorporated into the titania lattice  

In this research, we have focused on the formation of Ag nanoparticles dispersed in SiO2 matrix using sol-gel method. The influences of the metal concentration on the size variation of Ag nanoparticles and the size effect on the surface plasmon absorption have been studied. Sol-gel silica thin films containing Ag particles were synthesized by dip-coating on soda-lime glasses. The molar ratio of Ag / Si was chosen from 0.2% to 8%. All films were dried in air at 100 °C for 1 h. Using X-ray photoelectron spectroscopy, the Ag / Si ratios in the prepared films have been measured. In addition, it was shown that the prepared matrix was a stoichiometric composition as SiO2, and the synthesized... 

The roughness of glass surfaces after different stages of etching is investigated by reflection measurements with a spectrophotometer, light scattering, atomic force microscopy (AFM, on a small scale) and profilometry (on a large scale). The results suggest that there are three regimes during etching, according to their optical reflectivity and roughness. The first and the second regimes are studied by the Kirchhoff theory and the third one is studied by the optical geometric theory. Also, the roughness obtained by optical scattering is compared with the AFM results. Copyright © 2005 John Wiley & Sons, Ltd  

Adsorption of human serum proteins (Albumin and total protein) onto high purity synthesis nano-hydroxyapatite (HA), Ca 10(PO 4) 6(OH) 2, has been studied in a wide temperature range by UV-visible spectrophotometer. Adsorption isotherm is basically important to describe how solutes interact with adsorbent, andiscriticalinoptimizing the use of adsorbent. Inthe present study, the experimental results werefitted tothe Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (DR) models to obtain the characteristic parameters of each model and square of the correlation coefficients (R 2). According to the results, the DR isotherm model had the best agreement with the experimental data. The effect of... 

With respect to the influence of nanoparticles on mass transfer characteristics, limited number of studies available in the literature, deal primarily with gas-liquid systems. In this work, mass transfer performance and hydrodynamic characteristics including static and dynamic dispersed phase hold-ups of nanofluids have been investigated for pulsed liquid-liquid extraction column (PLLEC). The nanofluids used were prepared by dispersing SiO2 nanoparticles of 0.01, 0.05 and 0.1 volume percent with two different hydrophobicities in kerosene as base fluid using ultrasonication. UV-vis spectrophotometer was also used for evaluation of the nanofluids stability. The results were compared with... 

A multicomponent analysis method based on principal component analysis-artificial neural network model (PC-ANN) is proposed for the simultaneous determination of levodopa (LD) and benserazide hydrochloride (BH). The method is based on the reaction of levodopa and benserazide hydrochloride with silver nitrate as an oxidizing agent in the presence of PVP and formation of silver nanoparticles. The reaction monitored at analytical wavelength 440 nm related to surface plasmon resonance band of silver nanoparticles. Differences in the kinetic behavior of the levodopa and benserazide hydrochloride were exploited by using principal component analysis, an artificial neural network (PC-ANN) to resolve... 

Very recently, we fabricated (WO3)x-(TiO 2)1-x layers via micro-arc oxidation process under different applied voltages. Morphological and topographical studies, accomplished by SEM and AFM techniques, revealed that the pores size as well as the surface roughness increased with the voltage. Phase structure and chemical composition of the layers were also investigated by XRD and XPS and the results showed the grown layers consisted of titanium and tungsten oxides. It was found that WO3 dispersed in the TiO2 matrix and also doped into the TiO2 lattice. In addition, optical properties of the synthesized layers were studied employing a UV-vis spectrophotometer. Band gap energy of the layers was... 

S-doped TiO2 layers were grown on titanium substrates by MAO process. SEM results revealed a porous morphology with a pore size of 40-100 nm. Our XRD analysis showed that the anatase relative content reached its maximum value at the voltage of 500 V. The existence of sulfur in the states of S 4+ and S6+ which substituted Ti4+ in the titania crystalline lattice was confirmed by XPS results; meanwhile, no S 2- was detected. That is, a cationic doping was observed. EDS results showed that sulfur concentration in the layers increased with the voltage. The band gap energy was also calculated as 2.29 eV employing a UV-Vis spectrophotometer  

The present study concerns the electrochemical behavior of catechol and 4-methylcatechol in the presence of 2-mercapto-5-methyl-1,3,4-thiadiazole (MMT) in aqueous medium on the surface of the glassy carbon electrode by means of cyclic voltammetry and controlled-potential coulometry. The oxidation mechanism was deduced from voltammetric and spectrophotometric data. The electro-generation of quinoid intermediates and their subsequent Michael-type reaction with MMT has been investigated as a clean and convenient strategy for the synthesis of corresponding reaction products. In addition, electro-synthesis of Michael addition products has been successfully accomplished by controlled-potential... 

In this paper, CuO/CNT nanocomposite was synthesized and its photocatalytic dye degradation ability for colored textile wastewater was studied. The characteristics of the nanocomposite were investigated by XRD, SEM and FTIR. The photodegradation of Direct Red 31 (DR31) and Reactive Red 120 (RR120) by CuO/CNT in presence of H2O2 was investigated. Photocatalytic dye degradation was determined by UV-vis spectrophotometer. Effects of catalyst dosage, initial dye concentration and salt on photodegradation performance were studied. The photocatalytic dye degradation ability of pure CuO and CuO/CNT nanocomposite is 78 % and 89 % for DR31 and 70 % and 87 % for RR120, respectively. The results showed... 

Terahertz spectroscopy is a useful and an efficient method for detection of pure materials and also mixture compounds. In the present study the terahertz spectra of the α-lactose, high explosives RDX and also the binary mixture of mentioned materials has been obtained in the transition mode. The obtained spectra of the pure materials were in a very good agreement with literatures in the range of 0.1 to 1.5 terahertz. The spectra of mixture samples which show the specific fingerprint characters of each component, declare that terahertz spectroscopy can be used effectively for the detection of explosives and chemical compounds even in the mixture samples. © 2016 IEEE  

Molecularly imprinted polymer (MIP) was synthesized through the coprecipitation method on the graphene oxide anchored pencil lead as a substrate for the first time and applied as an efficient sorbent for pseudo stir bar sorptive extraction of nabumetone. The extracted analyte was determined by a novel spectrophotometric method based on the aggregation of silicate sol-gel stabilized silver nanoparticles in the presence of the analyte. The synthesized polymer was characterized using Fourier transform infrared spectroscopy and field emission scanning electron microscopy. Optimization of important parameters affecting the extraction efficiency was done using central composite design whereas the... 

The study on the mechanism of the shape evolution of nanocrystaline particles is an important and emerging field, which is applicable in the shaped control synthesis of nanoparticles. As an alternative to transmittance electron microscopy (TEM), which is already used in the study of nanoparticles, in this article a simple spectrophotometric method has been proposed utilizing the advantages of chemometrics methods in analyzing overlapped and complex spectral data. The evolutionary visible absorbance data of CdSe quantum dots through particle formation were analyzed by factor analysis, evolving factor analysis, and multivariate curve resolution-alternative least-squares analysis, by which four... 

Studies on copper zinc tin sulpher selenide (CZTSSe) thin-film material and its applications as a base material are intensively being researched since it is an earth-abundant, inexpensive, flexible, and interesting material for next-generation optoelectronic technologies. Apropos, this study explores and reports the synthesis of CZTSSe thin films and their key optoelectronics characteristics. The reported films are fabricated on a soda-lime glass substrate by using a physical vapor deposition technique, and then annealed from 250 to 450 °C. From the X-ray diffraction analysis, the structure of the as-deposited thin films is found to be amorphous in nature. Annealed thin films of CZTSSe... 

Studies on copper zinc tin sulpher selenide (CZTSSe) thin-film material and its applications as a base material are intensively being researched since it is an earth-abundant, inexpensive, flexible, and interesting material for next-generation optoelectronic technologies. Apropos, this study explores and reports the synthesis of CZTSSe thin films and their key optoelectronics characteristics. The reported films are fabricated on a soda-lime glass substrate by using a physical vapor deposition technique, and then annealed from 250 to 450 °C. From the X-ray diffraction analysis, the structure of the as-deposited thin films is found to be amorphous in nature. Annealed thin films of CZTSSe... 

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

Spectrophotometric analysis method based on the combination of the principal component analysis (PCA) with the feed-forward neural network (FFNN) and the radial basis function network (RBFN) was proposed for the simultaneous determination of paracetamol (PAC) and p-aminophenol (PAP). This technique relies on the difference between the kinetic rates of the reactions between analytes and silver nitrate as the oxidizing agent in the presence of polyvinylpyrrolidone (PVP) which is the stabilizer. The reactions are monitored at the analytical wavelength of 420 nm of the localized surface plasmon resonance (LSPR) band of the formed silver nanoparticles (Ag-NPs). Under the optimized conditions, the...