Sharif Digital Repository

Although the capability of using sulfate anion as a wettability modiffier is well established, no systematic investigation on the effect of sulfate ions and natural surfactants in the crude oil including asphaltene and resin on the interfacial tension (IFT) of acidic crude oil (ACO)/sulfate were performed. In this regards, the fluid/fluid interactions are tested through the IFT measurements for ACO, asphaltene and resin extracted from ACO in the presence of sulfate salts including Na2SO4, MgSO4 and CaSO4 while the concentration of each salt ranges between 0 and 45000 ppm. The obtained results demonstrate that the capability of asphaltene molecules is higher for IFT reduction compared with... 

The aim of this research was to synthesize barium sulfate nanoparticles using a spinning disk reactor. Barium sulfate was produced by continuously pumping two aqueous solutions of BaCl2 and Na2SO 4, respectively, into the chamber of spinning disk reactor, where a liquid-liquid reaction took place to form BaSO4. The influences of various operating and design parameters such as the initial supersaturation, disk rotation speed, free ion ratio, and the disk diameter on the size of barium sulfate nanoparticles were carefully investigated. By varying the supersaturation and disk rotation speed, a broad range of particle size ranging from micrometer sizes down to nanoparticles smaller than 100 nm... 

Single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized in aqueous solutions containing FeCl2, FeCl3, FeSO4 and Fe2(SO4) 3. The effects of iron charge and the counter ions on the formation of carbon nanotubes (CNTs) were investigated. Thermogravimetric (TG) analysis indicated that carbon multilayer structures including CNTs and multishell graphite particles were formed in deionized (DI) water without the iron precursor. SWCNTs were also synthesized in the presence of the iron ions. It was also found that the mole ratio of [Fe2+]/[Fe3+] in the solution has a significant influence on the purity of CNTs and the process yield. The highest yield was... 

In this work, a reliable dimensionless correlation is proposed for prediction of permeability reduction rate in porous media, which is verified by experimental data obtained in this work in glass bead and sand pack as well as the core data from the literature. Although this correlation is based on the data which were obtained in our work in glass bead and sand-packed media at low pressure, it shows considerable flexibility to match with the extracted data for sandstone cores at high pressure, various flow rates, different temperatures and concentrations of calcium, and sulfate ions in brine solutions. In addition, a novel relationship for predicting the rate of precipitation of CaSO4 in... 

Inorganic scale deposition has been found to affect many industrial processes, including water injection into the oil reservoirs. The incompatibility of high sulfate ion content of seawater with formation water containing calcium ions results in formation damage and production decline. In this study, several simultaneous techniques are utilized for qualitative and quantitative analyses of calcium sulfate scale to get more insight into the formation damage during smart water flooding at micro and nanoscales. In the experimental section, calcium sulfate deposition due to the mixing of the formation water and seawater samples was investigated using the dynamic quartz crystal microbalance...