Sharif Digital Repository

Wire-based friction stir processing is introduced as a solid-state surface alloying strategy for surface alloying of AZ31 magnesium alloy with aluminum, as a key alloying element in magnesium alloys. This technique enables the formation of a defect-free, grain refined and alloyed surface with the increased volume fraction of Mg-Al second phase, and thus, enhanced surface hardness. This simple technique provides a solid-state surface alloying pathway to improve the surface properties of the metallic materials. © 2021, The Minerals, Metals & Materials Society and ASM International  

In the present study, the wear behaviour of Cu-Al2O3 composites and Cu-Al alloys has been investigated. The experiment involved casting of Cu-Al alloys with 0•37, 1, 2 and 3 wt-% of aluminium under inert gas atmosphere. The composites were produced by internal oxidation of alloys at 950°C for 10 h in presence of Fe2O3 and Al 2O3 powders mixture. The microstructures of composites were studied using SEM and atomic force microscopy. To identify wear behaviour of specimens, dry sliding pin-on-disk wear tests were conducted according to ASTM G99-95a standard. The normal loads of 20, 30, and 40 N were applied on specimens during wear tests. The sliding speed and distances were selected as 0•5 m... 

The internal Oxidation introduces a practical method for producing copper matrix composites reinforced by alumina particles. The mechanical and physical properties of alumina reinforced copper composites and alloy specimens were investigated. This experiment involves casting of Cu-Al alloys with 0.37, 1, 2 and 3 weight percent of aluminium in non-oxidizing atmosphere with pure oxygen free copper. The composite specimens produced after internal oxidation process at 950°C for 10 hours in sealed alumina crucible. The microstructures of composite specimens were studied after internal oxidation using SEM and AFM. The hardness and electrical resistivity tests were measured. The wear properties of...