Sharif Digital Repository

A standard simulating technique test was investigated to assess the atmospheric corrosion behavior of silver coating. The rates of formation of corrosion products were measured in the simulating atmospheres of 100% humidity containing SO 2,H 2S and a complex atmosphere consist of SO 2,H 2S and NO 2 gases ,based on the mass increase method. The concentrations of corrosive gases were chosen according to real world conditions. XRD, SEM and EDS were used to examine the morphology and to determine the composition of the corrosion products under different experimental conditions. Results revealed the formation of Ag 2SO 4 and Ag 2S on the silver coating surfaces in the SO 2 and H 2S containing... 

Formation of machinable glass-ceramic in the system MgO-SiO 2-Al2O3-K2O-B2O 3-F with and without addition of MgF2 has been investigated. Crystallization of glass sample was done by controlled thermal heat treatment at nucleation and crystallization temperatures. The results showed that MgF2 in high concentration had a synergistic effect and enhanced the formation of interlockedmica crystals. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses were changed in the range of 235-405 kJ/mol, while the crystallization activation energies of samples with addition of MgF2 were changed in the range of 548-752 kJ/mol  

In the present study, the thermodynamics and mechanisms of vanadium extraction by a mixture of bis-2-ethylhexyl phosphoric acid (D2EHPA) and tri-n butyl phosphate (TBP) from sulfate medium were investigated. It was found that the maximum extraction percent of vanadium occurs at pH 1.8 under ambient conditions; this phenomenon was ascribed to the predominant presence of cationic species of vanadium (VO2+) at this pH. Based on the Fourier Transform Infrared (FT-IR) spectrums, the POH bond of D2EHPA was found responsible for the extraction of VO2+ species through a cationic exchange mechanism. Employing the slope analysis method showed that the stoichiometric reaction... 

Synergistic effects of Cyanex 272 mixed with D2EHPA and Cyanex 302 mixed with D2EHPA were investigated for the separation of cobalt and nickel from a dilute sulfate media with the aim of reducing the reagent cost. Selective extraction of cobalt over nickel improved with respect to D2EHPA, but worsened with respect to Cyanex 272. By the application of the slope analysis method, the stoichiometric coefficient of the extractant was found to be four for cobalt and five for nickel, in a mixture of D2EHPA with Cyanex 302. However, it was four for both cobalt and nickel in a mixture of D2EHPA with Cyanex 272. Fourier Transform Infrared Spectroscopy (FT-IR) was utilized to examine the... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

PVDF/nanoclay nanocomposites were prepared via melt mixing method. The intercalated dispersion of the nanoclay in PVDF matrix was confirmed by XRD. According to FTIR, DSC and XRD results, the presence of nanoclay facilitated transition from α-to-β crystalline phase. Electron beam irradiation decreased the melting point of the nanocomposites. The decrease in melting point of the nanocomposites was about 11 C at 500 kGy. The crystallinity of nanocomposites increased at an irradiation dose of 100 kGy and decreased at higher irradiation doses. The extent of crosslinking of the nanocomposites increased significantly with irradiation up to 300 kGy. The nanoclay intensified the increase in yield... 

Different concentrations of CaF2 were incorporated in mica glass-ceramics to evaluate their effects on the crystallization and microstructure. The kinetics of phase transformations, and the microstructures of the final crystalline phase were found to be dependent on the concentration of nucleation agents. The results showed that CaF2 in high concentration had a synergistic effect and enhanced the formation of interlocked mica crystals. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses were changed in the range of 235-405 kJ/mol, while the crystallization activation energies of samples with addition of CaF2 were changed in the range of 419-747... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

The present work reports the synthesis of a Pt-modified NiO–Al2O3 nanocomposite derived from graphene-supported layered double hydroxide (Pt–NiO/G) and demonstrates its catalytic activity. The resulting Pt–NiO/G nanocomposite was characterized by FT-IR, XRD, FE-SEM, TEM and XPS techniques and used for catalytic reduction of p-nitrophenol (P-NP) to p-aminophenol (P-AP). The influence of graphene on catalytic activity was comparatively considered by preparation of Pt–NiO nanoparticles derived from layered double hydroxide. The superior catalytic performance of Pt–NiO/G was ascribed to the synergistic effect between Pt and NiO. Furthermore, reduction of P-NP was considered to follow a... 

Barrier properties of the biaxial oriented polypropylene (BOPP) films are the most important properties in food packaging industry. In this study different compatibilizers and materials were examined in order to find an appropriate blend composition to minimize the oxygen permeability of the films. It was observed that using organoclay and nanocomposits have positive effect on the oxygen permeability although the kind of compatibilizer is important. Through all evaluated materials the PVA (Poly(vinyl alcohol)) and MA (Maleic Anhydride) were the most successful selection for this goal. The BOPP film blended by PVA achieved the lowest oxygen transfer rate (300 cc 20 μm/m2 24 h atm) in compared... 

Various mixtures of surfactants and nanosilica particles were investigated to assess their influence on rising bubble hydrodynamics. For this purpose, local velocities of rising bubbles were measured experimentally. Also, the effects of concentration of three types of surface-modified silica nanoparticles on density, viscosity, and surface tension of surfactant solutions were determined. Experimental results revealed that the simultaneous presence of nanoparticles and surfactant molecules led to the decrease of local velocities of rising bubbles. The presence of nanoparticles in surfactant solutions leads to a more reduction of bubble local velocity. This could be caused by the formation of... 

For the rapid detection of hyperglycemia in human blood, we adopted a facile and two-step electrochemical procedure to prepare nickel/reduced graphene oxide (rGO) hybrid electrodes in the framework of a three-dimensional (3D) nanostructure. High-density and vertically-aligned nickel submicrorods with an average diameter of 155 ± 15 nm and a length of 7 ± 1 μm (an aspect ratio of about 40-50) were prepared by template-mediated electrochemical deposition techniques. Networks of rGO nanosheets between the rod-shaped arrays were formed by the cathodic electrophoretic deposition method. The synergistic effect of nickel morphology (planar and high-density rod-shaped arrays) and graphene oxide... 

Understanding the roles of asphaltene and resin as natural surfactants existed in crude oil can enlighten contradicting reported results regarding interfacial tension (IFT) of crude oil/aqueous solution as a function of salinity and ion type. In this way, this study is aimed to investigate the effect of these natural surface active agents on IFT of with special focus on SO42− anion and Mg2+ cation. Two different synthetic oil solutions of 8 wt% of the extracted asphaltene and resin dissolved in toluene are prepared, and then IFT values are measured. After that, the obtained results are compared with the IFT of intact crude oil in contact with the same saline solutions examined in the... 

The use of hybrid filler is a promising strategy for development of thermally conductive polymer composites. This paper reported the measurement of thermal conductivity of the epoxy composite filled with a hybrid filler of graphene nanoplatelet (GNP) and silicon carbide (SiC) microparticles. For this hybrid filler, the effect of the average size of SiC on composite thermal conductivity was examined. The results showed that the thermal synergistic effect was highly affected by the average size of the SiC. By using a hybrid filler of 11% vol. GNP and 9% vol. 1 µm-size SiC micro-particles thermal conductivity has reached 3.44 W m−1 K−1. This value is 42% higher than the thermal conductivity of... 

The development of polymer-based composites with thermal transport capability has now become essential in response to the efficient thermal management required in electronic and energy conversion devices. In this work, a novel hybrid filler consisting of graphene nanoplatelet (GNP) and boron nitride microparticles (micro-BN) is used to improve the thermal conductivity of epoxy composite. The GNPs with an average lateral size of 8 µm and an average thickness of 5 nm are in the same volume range with the 1 µm size micro-BN particles. According to the results, the thermal conductivity of the composites changes abruptly with increasing micro-BN loading at fixed GNP loading, which is attributed...