Sharif Digital Repository

Incorporation of calcium(ii), zinc(ii) and aluminium(iii) to manganese oxides greatly improved the activity of manganese oxide towards the epoxidation of olefins in the presence of anhydrous tert-butyl hydroperoxide as an oxidant  

A dense membrane of La0.6Sr0.4Co0.8Fe0.2O3- δ (LSCF) perovskite was prepared by a new chelating agent, ethylene diamine N,N,N′,N′-tetra N-acetyl diamine (EDTNAD). As a potent ligand, EDTNAD provided a facile one-step method to form complexes of the four metal ions, simultaneously. The oxygen permeation flux through the pure perovskite LSCF dense membrane was measured over temperature range of 1073-1223 K, thickness of 0.7-1.0 mm and oxygen partial pressure of 0.1-1.0 bar. Oxidative coupling of methane (OCM) reaction using LSCF disk in the atmospheric membrane reactor and over the temperature range of 1073-1173 K showed a C2 selectivity of 100% and C2 yield of 5.01% at 1153 K. Furthermore,... 

The optimization of chemical syntheses based on superstructure modeling is a perfect way for achieving the optimal plant design. However, the combinatorial optimization problem arising from this method is very difficult to solve, particularly for the entire plant. Relevant literature has focused on the use of mathematical programming approaches. Some research has also been conducted based on meta-heuristic algorithms. In this paper, two approaches are presented to optimize process synthesis superstructure. Firstly, mathematical formulation of a superstructure model is presented. Then, an ant colony algorithm is proposed for solving this nonlinear combinatorial problem. In order to ensure... 

Pyrochlore free (x)PMN-(1 - x)PZT ceramics were synthesized successfully by a seeding method. In this method, the mixture of PbO, MgO and Nb2O5 was added to the prepared PZT sol to from PMN-PZT gel. The gel was fired to vaporize the organic contents of gel and obtain powder. Two-step sintering process was used to produce pyrochlore free ceramics. The samples produced by this method showed higher relative densities, lower sintering temperature and higher dielectric properties relative to the mixed oxide method, mostly due to the higher homogeneity of the prepared powder. The measured dielectric properties of PZT-rich and PMN-rich materials were high while the other samples exhibited low... 

Europium-doped yttrium silicate nanoparticles were grown inside a porous silicon oxide matrix by chemical impregnation of porous silicon layers, followed by heat treatments. The average size of the nanoparticles is 50 nm and they are dispersed almost uniformly within the whole porous layer. Local composition measurements demonstrate that Y and Eu are found only in nanoparticles, indicating a good phase separation efficiency. There is indirect evidence that yttrium silicate nanoparticles are nucleated around Eu ions. The crystalline phase of the particles is pure α-Y2Si2O7, with no trace of Y2O3 or Y2SiO5 or other Y2Si2O7 polymorphs. Structural purity is an advantage for this method, as in... 

Nanocrystalline Al-4 wt% Cu alloy reinforced with nanometric Al2O3 particles was synthesized by in situ reactive milling of Al and CuO powder mixture. X-ray diffraction (XRD), differential thermal analysis (DTA) and transmission electron microscopy (TEM) techniques were employed to study the mechanically induced solid state reaction between the blended powders. The mechanical milling stages were studied by scanning electron microscopy (SEM), bulk density measurement and laser particle size analyzer. It was shown that the reaction between Al and CuO occurs progressively as the mechanical milling continues, leading to formation of nanoscaled alumina particles. The grain refinement of the... 

In the present study, a one step hydrothermal process was employed to synthesize magnetite nanoparticles using oleic acid as surfactant agent at 140 °C. Effects of reaction time and alkalinity were studied on particles size and morphology. By changing these parameters, some monodisperse spherical nanoparticles with mean particle size between 2.71 and 13.88 nm were synthesized and characterized via TEM, XRD, VSM, TGA and FT-IR techniques. Assuming the Avrami behavior of particles formation, a kinetics equation was proposed for the transformation rate at 140 °C. Using some simplifying assumptions, nucleation and growth rates were calculated for the hydrothermal formation of magnetite... 

A convenient one-pot multi-component reaction of aromatic aldehydes, enolizable ketones or β-keto esters and acetonitrile in the presence of acetyl chloride and 10 mol% ZnO nanoparticles for the synthesis of β-acetamido ketones/esters at room temperature is described. © 2007 Elsevier B.V. All rights reserved  

The variation of the applied field results in a subsequent change of magnetization with time. There is a relationship between the coercivity (Hc), as the equilibrium characteristic of the system, and its magnetic stability (1/S), as a parameter characterizing the time dependence. 1/S as a function of Hc has been measured and studied for different Fe1-xCox samples. We synthesized several samples with different values of x by applying various magnetic fields during the grains' growth, and observed a linear relationship between 1/S and Hc. © 2007 Elsevier B.V. All rights reserved  

Eight new chitin derivatives have been synthesized via SN2 reaction of primary and secondary amines with tosylchitin. The products were characterized using FTIR and 1H NMR spectroscopy. A degree of substitution ∼ 1 was achieved through this process. These materials are soluble in water at room temperature, which enable their further applications in the future. © 2007 WILEY-VCH Verlag GmbH & Co. KGaA  

A modified mixed oxide method which is based on a two step reaction sintering process was designed to obtain single phase PMN ceramics. In this regard, pyrochlore phase formation during calcination process at different calcination temperatures was studied to determine the best soaking temperature for the first step in the specified method. In other words, the calcination temperature in which the least pyrochlore phase produced was chosen as the first step soaking temperature. The results showed that by utilizing this new method, single phase PMN ceramics with a high relative density of 98% can be synthesized successfully using conventional mixed oxide starting materials. © 2007 Springer... 

A simple, atom economy and highly efficient green protocol have been developed for synthesis of bis(indolyl)alkane by the reaction of indole derivatives with aldehydes and ketones in the presence of small amount of the heteropoly acids in water. © 2007 Elsevier B.V. All rights reserved  

A semi-interpenetrating polymer network (semi-IPN) hydrogel based on kappa-carrageenan (κC) and poly (vinylsulfonic acid, sodium salt) (PVSA) was prepared by graft copolymerization of acrylamide (AAm) using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. FTIR spectroscopy was used for confirming the structure of the final product. It was found that the chemical composition of the Semi-IPN hydrogel is equal to the initial homopolymers and monomer feed compositions. The swelling capacity of the hydrogel was shown to be affected by the MBA, APS, and AAm concentration as well as κC/PVSA weight ratio. The swelling behavior of the hydrogel was... 

In the present paper, a novel superabsorbent hydrogel composite based on gelatin have been prepared via graft copolymerization of acrylic acid (AA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. Certain variables of the graft copolymerization (i.e., the monomer, the initiator, and the crosslinker concentration as well as kaolin/gelatin weight ratio) affected on the ultimate water-swelling capacity were optimized. The composite structure was confirmed using Fourier transform infrared (FTIR) spectroscopy. A new absorption band at 1728 cm1 in the composite spectrum confirmed kaolinorganic polymer... 

A novel superabsorbent hydrogel composite based on gelatin has been prepared by graft copolymerisation of acrylic acid and acrylamide in the presence of kaolin powder, using methylene-bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate as an initiator. The synthetic variables affecting the water absorbency of the resulting superabsorbent composite were studied and the composite structure was confirmed using FT-IR spectroscopy. A new absorption band at 1728 cm-1 in the composite spectrum confirmed the presence of a kaolin-organic polymer linkage. The effect of kaolin content and MBA concentration showed that increasing these parameters decreased the water absorbency of the... 

Series of quaternary ammonium salts of substituted five-membered-ring iron complexes were prepared by reaction of allyl(cyclopentadienyl)iron(II) dicarbonyl with iminium salts. Also, reactions of allyl-(cyclopentadienyl) iron(II) dicarbonyl with in situ prepared iminium salts afford the same products in good to excellent isolated yields. © 2007 American Chemical Society  

Nickel-dimethylglyoxime complex (NiDMG) modified nickel electrode (Ni/NiDMG) showed a catalytic activity towards methanol oxidation in NaOH solution. The modified electrode prepared by the dimethylglyoxime anodic deposition on Ni electrode in the solution containing 0.20 mol L-1 NH4Cl + NH4OH (pH 9.50) and 1.0 × 10-4 mol L-1 dimethylglyoxime. The modified electrode conditioned by potential recycling in a potential range of 100-700 mV (vs. SCE) by cyclic voltammetry in alkaline medium (0.10 M NaOH). The results show that the NiODMG film on the electrode behaves as an efficient catalyst for the electrooxidation of methanol in alkaline medium via Ni(III) species formed on the electrode with the... 

Hydrogel hybrids were conveniently prepared from alkaline hydrolysis of chitosan-poly(acrylonitrile) mixture under highly practical conditions. The reaction of chitosan alkoxide anions with nitrile groups of poly(acrylonitrile) (PAN) forms crosslinking points and results in a three-dimensional network with superswelling ability in aqueous media. The hydrogel hybrid was identified using FTIR spectroscopy. The PAN content of the hydrolyzing feed affects proportionally the swelling capacity of the hydrogel hybrid. The swelling properties (capacity and rate) of the ampholytic hydrogel were investigated preliminarily. © 2005 Wiley Periodicals, Inc  

In the present work, Tetrahydrofuran was produced from 1,4-butanediol by catalytically dehydration of 1,4-butanediol in contact with a catalyst. Material used as catalyst were Synthesized and natural zeolites as well as alumina and silica. Synthesized zeolites were investigated in different aspect such as pore size, cation and Si/Al ratio. Results indicated that with increasing the Si/Al ratio, the activity of the zeolite used for 1, 4-butanediol dehydration step was reduced. Furthermore, it was observed that, upon the replacement of sodium with hydrogen and ammonium cations, the conversion of the 1, 4-butanediol into tetrahydrofuran was increased. It was shown zeolites possessing smaller... 

In this work, we synthesize a novel protein-based superabsorbent hydrogel and study its swelling behavior. The crosslinking graft copolymerization of acrylic acid (AA) onto the hydrolyzed collagen as a protein backbone was carried out in a homogeneous medium. Potassium persulfate (KPS) as an initiator and N,N′-methylene bisacrylamide (MBA) as a crosslinker were used. The product's structure was established using FTIR spectroscopy. We were systematically optimized the certain variables of the graft copolymerization (i.e. the monomer, the initiator, and the crosslinker concentration) to achieve a hydrogel with maximum swelling capacity. Under this condition, maximum capacity of swelling in...