Sharif Digital Repository

Nano sized ZnO on TiO 2 spherical core shells were prepared by using hydrothermal method. The particle size of initial TiO 2 was around 20 nm, and the specific surface area was 50 m2/gr. Different ratios of TiO 2 and ZnO applied to synthesize core shell particle. X-ray diffraction (XRD) used to phase characterization and crystalline size, scanning electron microscopy (SEM) to morphology and microstructure investigations. S. Brunauer, P. H. Emmett and E. Teller method (BET) to find specific surface area, Diffusive UV-visible-NIR spectrometry to bang gap calculations. The results indicate that powders with a shell of zinc oxide in specific range have the quantum size effect. Titanium oxide and... 

Treatment of dye pollution containing C.I. Acid Red 14 (AR14) by a coupled photocatalytic process was studied. Titanium dioxide, in the form of anatase and rutile, and zinc oxide, were used as photocatalysts. The investigated photocatalysts were Aldrich-produced nanopowders with crystallites of a mean size of 20-30 nm and a specific surface area of about 50 m 2/g. A comparison of TiO 2(anatase), TiO 2(rutile), TiO 2(a,r), and ZnO for the decolorization of the AR14 solution was performed. Results showed that color removal followed the decreasing order of TiO 2(a,r), ZnO > TiO 2(a,r) > TiO 2(a), ZnO > TiO 2(r), ZnO >TiO 2(a,r) > TiO 2(a) > ZnO > TiO 2(r). Response surface methodology (RSM) was... 

Pd 2+-doped TiO 2 thin films with mesoporous structure were produced on quartz substrate by sol-gel dip coating. The structural, morphological and optical properties of the film were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), atomic force microscopy (AFM) and UV/vis transmittance spectroscopy. By increasing the Pd 2+ concentration from 0 to 6 mol%, the crystallites appeared solely as the anatase phase and their average sizes decreased from 10.5 to 7.1 nm. Addition of Pd 2+ also resulted in increasing of the specific surface area and decreasing of the pore size of the layer. The transmittance of the films decreased in the... 

At room temperature, SO 2- 4/nano-TiO 2 efficiently catalyze the direct Mannich-type reaction of varieties of in situ-generated aldimines using aldehydes and anilines with ketones in a three-component reaction under solvent-free conditions. The reaction proceeds rapidly and affords the correspondingβ-amino ketones in good to high yields with good to excellent stereoselectivity. The catalyst can be recycled for subsequent reactions without any appreciable loss of efficiency  

A seeding-growth approach was used to prepare Au@Ag@Au core double shell nanoparticles which were loaded on a rutile-nanorods/anatase-nanobranches thin film via the impregnation method. The thin film was synthesized on a fluorine-doped SnO 2 substrate via three stages of (i)TiCl 4 treatment, (ii)hydrothermal, and (iii)aqueous chemistry. The photocatalytic capability of the newly developed nanostructure was higher than P25 TiO 2 thin film by 40% under visible light and by 100% under UV light irradiation. Photogenerated charges separation at the junctions of rutile-nanorods and anatase-nanobranches along with localized surface plasmon resonance followed by the hot electron transfer from the... 

In this study, titanium substrates which previously oxidized through Micro arc oxidation method, was coated by Hydroxyapatite (HAp) coating once more by means of the same method. Morphology, topography and chemical properties as well as phase composition and thickness of layers were studied to reveal the effect of the electrolyte concentration on coating features. According to results, the obtained coatings are consisted of HAp and titania as the major phases along with minor amounts of calcium titanate and α-tri calcium phosphate. Ca and P are present on surface of obtained layers as well as predictable Ti and O based on the XPS results. Thickness profile of coatings figured out that by... 

Various methods are devised to capture renewable energy or waste heat from different sectors, where among all, waste heat capturing from the generator of a wind turbine through the cooling process for freshwater and cooling production is paid less attention in Iran, in spite of the fact that many wind farms in Iran are in hot and humid regions and the residents nearby the farms desperately need freshwater and cooling load. To surmount this problem, waste heat extraction from a wind turbine (Enercon 70 Model) for freshwater and cooling production is proposed in this study. Instead of dissipating this thermal energy of the wind turbine into the environment, it can be used for freshwater and... 

TiO 2 dye-sensitized solar cells (DSSCs) in the form of double-layer films, containing an under-layer and an over-layer, with various crystal structures (i.e., anatase and rutile phases) and morphologies (i.e., nanoparticle and nanowire) were reported. It was found that the photovoltaic performance of TiO 2 DSSCs depends on the morphology, crystal structure, light scattering effect, optical band gap energy and arrangement of the under- and over-layer films. The double-layer solar cell made of anatase-TiO 2 nanoparticles as the under-layer and anatase-TiO 2 nanowires as the over-layer (i.e., AW solar cell) showed the highest power conversion efficiency and fill factor of 6.34% and 62.6%,... 

This article investigates phenol removal from an aqueous solution by using enzymatic and photocatalytic methods and the efficiency of these methods has been compared. In enzymatic and photocatalytic methods, Coprinus cinereus, peroxidase enzyme and commercial TiO2 powders (Degussa P-25) in aqueous suspension were used, respectively, in ambient temperature. The effects of different operating parameters such as duration of process, catalyst dosage or enzyme concentration, pH of the solution, initial phenol concentration and H2O2 concentration on both processes were examined. In enzymatic method, efficiency of degradation reached 100% within 5min, while in the photocatalytic method, the... 

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2... 

In this study a novel Pt/Ni nanostructure consisting of nano-bushes and nanocubes was fabricated onto TiO 2 nanotubes. The scanning electron microscopy images showed that a large amount of well-dispersed nano-architectures had uniformly covered all over the surface which made an electrode with high surface area. It was obviously seen that the nanocube structures mainly consists of Ni had been grown on top of each other while the Pt colonies represented bush-like structures. As a non-enzymatic glucose biosensor, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an excellent performance. The proposed biosensor had two linear ranges for detection of glucose from 0 to 0.12 mM (correlation... 

Hierarchical TiO 2 nanorod/nanoflower thin film was synthesized on fluorine doped tin oxide glass via hydrothermal and aqueous chemistry methods. According to field emission scanning electron microscopy results, the thin film was crack-free and uniform. Primary nanorods had an average diameter of 95 nm and a length of 2 µm. They were perpendicular to the substrate owing to the TiO 2 prenucleation. Growth of the nanoflowers on the nanorods could increase both the specific surface area and roughness. X-ray diffraction and Raman spectroscopy showed that the nanorods were rutile; while the nanoflowers were anatase. Efficient electron transfer from anatase to rutile could therefore occur.... 

In the present study, the structural features, corrosion behavior, and in vitro bioactivity of TiO 2 nanotubular arrays coated on Ti–6Al–4V (Ti64) alloy were investigated. For this reason, Ti64 plates were anodized in an ammonium fluoride electrolyte dissolved in a 90:10 ethylene glycol and water solvent mixture at room temperature under a constant potential of 60 V for 1 h. Subsequently, the anodized specimens were annealed in an argon gas furnace at 500 and 700 °C for 1.5 h with a heating and cooling rate of 5 °C min −1 . From XRD analysis and Raman spectroscopy, a highly crystalline anatase phase with tetragonal symmetry was formed from the thermally induced crystallization at 500 °C.... 

CeO 2-TiO 2 nanoparticles were prepared by the sol-gel process using 2-hydroxylethylammonium formate as room-temperature ionic liquid and calcined at different temperatures (500-700°C). CeO 2-TiO 2-graphene nanocomposites were prepared by hydrothermal reaction of graphene oxide with CeO 2-TiO 2 nanoparticles in aqueous solution of ethanol. The photocatalysts were characterized by X-ray diffraction, BET surface area, diffuse reflectance spectroscopy, scanning electron microscopy, and Fourier transformed infrared techniques. The results demonstrate that the room-temperature ionic liquid inhibits the anatase-rutile phase transformation. This effect was promoted by addition of CeO 2 to TiO 2.... 

Hierarchical submicrometer TiO 2 hollow spheres with outer diameter of 300-700 nm and shell thickness of 200 nm are synthesized by liquid phase deposition of TiO 2 over carbon microspheres as sacrificial templates. The final TiO 2 hollow spheres are applied as a scattering layer on top of a transparent nanocrystalline TiO 2 film, serving as the photoanode of a dye-sensitized solar cell (DSC). In addition to efficient light scattering, the mesoporous structure of TiO 2 hollow spheres provides a high surface area, 74 m 2/g, which allows for higher dye loading. This dual functioning suggests that TiO 2 hollow spheres may be good replacements for conventional TiO 2 spheres as scatterers in DSCs.... 

The present work describes sensing application of modified TiO 2 nanotubes having carbon-Pt nanoparticles for simultaneous detection of dopamine and uric acid. The TiO 2 nanotubes electrode was prepared using anodizing method, followed by electrodeposition of Pt nanoparticles onto the tubes. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. The C-Pt-TiO 2 nanotubes modified electrode was characterized by cyclic voltam-metry and differential pulse voltammetry methods. The modified electrode displayed high sensitivity towards the oxidation of dopamine and uric acid in a phosphate buffer solution (pH 7.00). The electro-oxidation currents... 

A conic body packed bed reactor, internally irradiated with a UV-C lamp and equipped with circulating upflow stream was employed to investigate the decomposition of a widely used azo dye, direct red 16, in water. The synthesized nanostructure TiO 2 photocatalyst particles were immobilized on the surface of transparent Raschig ring packings. Solutions with initial concentration of 30 mg L -1 of dye, within the range of typical concentration in textile waste waters, were treated under the mild operating conditions of natural pH of 6.75 and temperature of 25 °C. Investigations on the active species showed that hydroxyl radicals play the major role in the process, providing a perfect degradation... 

TiO 2 -rGO nanocomposite coatings were obtained by electrophoretic deposition (EPD) technique of TiO 2 nanoparticles and graphene oxide (GO) on stainless steel substrate. First, GO particles were synthesized using a modified Hummers' method. GO was reduced electrochemically to form a coating in the presence of nano-sized TiO 2 particles. The influences of different parameters such as GO concentration, coupling co-electro-deposition parameters (electrophoretic duration and voltage) on thickness, surface morphology and, corrosion behavior of the as-synthesized TiO 2 -rGO nanocomposite coatings were systematically surveyed. The morphology and microstructure were investigated by field emission... 

Sufficient quantity of trace metals is essential for a well performing anaerobic digestion (AD) process. Among the essential trace elements in active sites of multiple important enzymes for AD are iron and nickel ions. In the present study, iron and nickel in the form of Fe2O3 and NiO were coated on TiO2 nanoparticles to be used in batch and continuous operation mode. The effect of TiO2, Fe2O3–TiO2, and NiO–TiO2 nanoparticles on each step of AD process was assessed utilizing simple substrates (i.e. cellulose, glucose, acetic acid, and mixture of H2–CO2) as well as complex ones (i.e. municipal biopulp). The hydrolysis rate of cellulose substrate increased with higher dosages of the coated...