Sharif Digital Repository

The diffusion and deposition of TiO2 nanoparticles in EOR application was investigated in this paper. TEM image of nanoparticles showed that the particles are elongated with average long and short axis sizes of 54 and 15 nm. Water flooding tests showed that the recovery factor can be improved from 49% to 80% using TiO2 nanoparticles. Viscosity and interfacial tension measurements showed that by using TiO2 nanoparticles the viscosity of injected fluid and interfacial tension do not change significantly and can not explain the change in recovery factor. Contact angle measurements showed that nanoparticles deposition changed the wettability of the rock surface from oil-wet to water-wet. SEM... 

In this study, Yittria Stabilized Zirconia/Titania powders synthesized via air plasma spray (APS) method such as morphology changes and phase transformations of core-shell structure characterized. Phase analysis of powders was performed by XRD. The crystallite size and lattice strain of YSZ/TiO2 core-shell structure was calculated by Williamson-Hall method. Morphology was observed with scanning electron microscope. EDS and map analysis were used for core-shell characterization. Results revealed that all TiO2 nano particles were melted around YSZ powders with the thickness between 1 up to 5 μm. After spraying the YSZ/TiO2 mixture in water, strain values increased but crystallite size... 

Humic acid (HA) constitutes a large portion of natural organic matter (NOM), and is the main precursor of toxic and cancerogenic Trihalomethanes compounds, formed during chlorination of drinking water. Therefore, it is essential that the humic acid be eliminated from water before treating it. The present study aims to investigate the photocatalytic degradation of humic acid (HA) using TiO2 nanoparticles immobilized on perlite granules (TIP), irradiated by UV light in a photoreactor. Samples of coated perlites were prepared by a dip coating method using a commercial powder of TiO2. Characteristics of the prepared samples were evaluated by X-ray and scanning electron microscope techniques.... 

Laser ablation of titanium target in distilled water for synthesis of colloidal nanoparticles is studied both experimentally and theoretically. The effects of laser parameters such as wavelength, pulse energy, fluence and shot numbers on the ablation rate and size properties of colloidal nanoparticles are investigated. The experimental approach addresses the interesting issue for finding the optimal main experimental parameters of laser ablation. The theoretical thermal model of nanosecond pulsed laser ablation is developed to visualize the evolution of temperature distributions and ablation depth. The simulation result of ablation depth has been compared with the experimental result... 

Density of surface charges of cellulose fibers and -potential of TiO2 nanoparticles in the solution were measured and controlled by pH. The adsorption and clustering of TiO2 nanoparticles on the surface of cellulose fibers were studied using scanning electron microscopy (SEM) and a scale in different situations of repulsion and attraction between the particles and surface. The experiments show formation of two-dimensional clusters of nanoparticles on the surface. Weight measurement of the adsorbed particles and clusters via the adsorption time results in that there are three stages containing nucleation, two-dimensional growth and saturation for clustering of nanoparticles on the surface.... 

Herein, we report the impact of light scattering mechanism on photovoltaic and photoelectrochemical performance of dye-sensitized solar cell (DSC) devices composed of TiO2 nanoparticles and hollow cubes. DSCs are designed by two different light scattering modes (i.e., mode I in form of single layer electrode containing nanoparticles and hollow cubes and mode II in the form of double layer electrode comprising active and scattering layers made of nanoparticles and mixtures of nanoparticles and hollow cubes, respectively). The synthesized anatase-TiO2 hollow cubes (200–400 nm) and nanoparticles (15–30 nm) are employed to enhance the optical length and light harvesting of photoanodes,... 

To compensate for drag increment due to the addition of nanoparticles to heat-transfer fluids, it seems that one could add drag reducer polymeric agents to these fluids. So, in this work, experiments were carried out for solutions of two types of polyacrylamide (FLOPAAM 3330S and FLOPAAM 3630S) at three distinct concentrations (25, 40, and 55 ppm), and TiO2-water nanofluid at concentrations of 0.015, 0.02, 0.025, and 0.03 L/L. The steady state turbulent convective heat transfer and the friction factor of the suspension of TiO2 in a dilute solution of very high molecular weight, polyacrylamide (hybrid fluid), in a coiled tube were analyzed. Experimental measurements were carried out from a... 

Biodegradable polymer/bioceramic nanocomposites are osteoconductive and can accelerate healing of bone tissue. In this research, silk fibroin (SF)/titanium dioxide (TiO2) nanocomposites were synthesized using different concentrations of TiO2 nanoparticles (0, 5, 10, 15 and 20 wt%). The SF/TiO2 nanocomposites were studied in terms of bioactivity and biocompatibility. The in vitro assessment of osteoblasts compatibility indicated that SF inclusion rendered nanocomposite biocompatible whereas presence of TiO2 nanoparticles allowed the cells to adhere and grow on nanocomposite surface and enhanced the bioactivity of the composite. © 2017, Taiwanese Society of Biomedical Engineering  

Herein, enhancement of dye-sensitized solar cell (DSC) performance is reported by combining the merits of the dye loading of TiO2 nanoparticles and light scattering, straight carrier transport path, and efficient electron collection efficiency of TiO2 cubes. We fabricate DSC devices with various arrangement styles and compositions of the electrodes in the forms of monolayer and double layer films. For this purpose, the solvothermal synthesized TiO2 cubic particles (100-600 nm) are employed as the scattering layer, whereas TiO2 nanoparticles (15-30 nm) synthesized via a combination of solvothermal and sol-gel routes are used as the active layer of devices. We improve the photovoltaic... 

Using low molecular weight polyethylenimine (PEI), transparent thin films of TiO2 nanoparticles were prepared by layer-by-layer self assembly method. UV-visible spectrophotometry was employed in a quantitative manner to monitor the adsorbed mass of TiO2 and PEI after each dip cycle. The adsorption of both TiO2 and PEI showed a saturation dip time of 10 min. The effect of dip time on the growth mode and surface morphology was investigated by scanning electron microscopy (SEM) and non-contact atomic force microscopy (AFM). It was found that growth proceeds in the form of laterally broad islands in case of short dip times, and taller but laterally smaller islands in case of longer dip times. A...