Sharif Digital Repository

Distilleries wastewater is an important environmental problem due to its high BOD and COD content, and toxic materials such as phenolic compounds, and low pH. Direct and continuous discharge of this effluent to the soil reduces the quality of soil and destroys agricultural crops. In addition, its discharge to rivers and sea will seriously affect aquatic life. In order to prevent environmental hazards, a number of biological, chemical and physical methods have been introduced for treatment of this wastewater. Chemical and physical methods are based on surface sorption, ion exchange, membrane processes and chemical oxidations. In biological methods, anaerobic processes are more economical than... 

The increase of pollution and the expansion of industrial, agricultural wastewater and urban runoff discharges in water sources have intensified the concentration of water pollutants. Considering that in Iran as in other countries the major part of drinking water is obtained from surface waters and due to the importance of disinfection, chlorination is doubtlessly the optimum and most common water treatment method used. However this method produces chlorination by-products (CBPs). Trihalomethanes(THMs) and Haloaceticacids (HAAs) are the main and most important groups of disinfection by-products (DBPs). Separation of THMs has gained a lot of breakthroughs since a lot of time elapses from its... 

The paper aims at proposing a controller through two-layer neural networks (NN) in order to control CD4 amount in HIV + Patients. In the same direction, initially a new mathematical model by using of two-layer neural networks (NN) was designed. Medical information of 300 HIV + Patients who were being treated in the Iranian Research Center for HIV/AIDS (IRCHA), Imam Khomeini Hospital, Tehran, was used to design this model. Highly active antiretroviral therapy (HAART) medical method is a significant method that was used in this study. It is worthy to say that CD4 amount declining leads to immune system deficiency and it is considered as one of AIDS main symptoms. Output of this mathematic... 

This paper addresses a conceptual study on different aspects of a novel smart treatment method for a relatively new challenge of saline water production from low permeability lenses of high flow gas wells. Selective sealing of such lenses along with minor effect on gas productivity usually faces practical difficulties due to the inherent permeability contrast. Engineered application of salt sensitive gellan biopolymer through a smart treatment scenario that includes a protective gas flow proved its ability for treating such challenge. This paper investigates the importance of the gel rigidity and its coverage in the smart treatment scenario through considering the brine salinity and the... 

Dual phase steels (DPS)s have a microstructure consisting of a hard second phase called Martensite in the soft Ferrite matrix. In recent years, there has been interest in dual-phase steels, because the application of these materials has made significant usage; particularly in the automotive sector Composite microstructure of (DPS)s exhibit interesting characteristic mechanical properties such as continuous yielding, low yield stress to tensile strength ratios(YS/UTS), and relatively high formability; which offer advantages compared with conventional high strength low alloy steels(HSLAS). The research dealt with the characterization of damage in (DPS)s. In this study by review the mechanisms... 

A developed route to form TiO2 self cleaning coatings on polycarbonate substrates is reported. TiO2 coatings on plastics may find widespread application in auto and construction industries if possess desired photocatalytic and mechanical properties. A chemical surface treatment method was used to create hydrophilic groups on the surface. X-ray photoelectron spectroscopy showed the treatment led to the oxidation of surface groups. TiO2 deposition was based on wet coating using an anatase sol of TiO2 nanoparticles of 30 nm size. The sol was synthesized using a sol-gel route. A pre-coat of peroxotitanium complex was employed to improve adhesion and inhibit the substrate degradation. The coating... 

In drilling oil wells a system of complex fluids and chemical additives is used. Losses of these fluids in the well during drilling or disposal of them in well site could transfer pollutants to groundwater. In the present study a number of well sites, located in South of Iran, were studied to indicate types and magnitude of various pollutant materials that remain in the environment undestroyed and have considerable impacts on the underground water resources. Hydrocarbons used in Oil Base Muds (OBM) that can't be biodegrade readily in nature found to be the most severe pollutant material caused by disposal of Drilling Mud and Cuttings. Volume of drilling waste for these oil wells evaluated to... 

As benign tumors, warts are made through the mediation of Human Papillomavirus (HPV) and may grow on all parts of body, especially hands and feet. There are several treatment methods for this illness. However, none of them can heal all patients. Consequently, physicians are looking for more effective and customized treatments for each patient. They are endeavoring to discover which treatments have better impacts on a particular patient. The aim of this study is to identify the appropriate treatment for two common types of warts (plantar and common) and to predict the responses of two of the best methods (immunotherapy and cryotherapy) to the treatment. As an original work, the study was...