Sharif Digital Repository

UF6 gas flow in the total regions of a rotor with the radius of 0.1 m and the length of 1 m in axisymmetric and steady states was simulated using a new hybrid CFD-DSMC method in the OpenFOAM framework. Implicit coupled density-based scheme was performed for CFD method, and Variable Hard Sphere (VHS) and diffuse model were employed in DSMC method. Also, as an initial estimation, the local Knudsen number was applied to determine the interface location between the continuum-rarefied regions (r = 0.0855 m). Then it was modified (r = 0.084 m) to reduce the computational cost. The comparison results of pure CFD and CFD-DSMC methods illustrated that there were large differences between the flow... 

UF6 gas flow in the total regions of a rotor with the radius of 0.1 m and the length of 1 m in axisymmetric and steady states was simulated using a new hybrid CFD-DSMC method in the OpenFOAM framework. Implicit coupled density-based scheme was performed for CFD method, and Variable Hard Sphere (VHS) and diffuse model were employed in DSMC method. Also, as an initial estimation, the local Knudsen number was applied to determine the interface location between the continuum-rarefied regions (r = 0.0855 m). Then it was modified (r = 0.084 m) to reduce the computational cost. The comparison results of pure CFD and CFD-DSMC methods illustrated that there were large differences between the flow... 

In this paper, uranium sorption onto amberlite CG-400 anion exchange resin in the presence of phosphate anions was studied. The effect of contact time between the sorbent and aqueous solution, pH, initial concentration of uranium and temperature were also investigated. Kinetic studies show that uranium sorption onto amberlite CG-400 resin in the presence of phosphate is a fast process and follows pesudo-second-order kinetics. It was also found that the pH value and the presence of phosphate play very important roles in the uranium sorption onto CG-400 resin. Optimum pH for uranium sorption in the presence of phosphate anions was about 3.5. The experimental sorption isotherm is successfully... 

Uranium (VI) sorption using an anionic exchanger resin, namely Amberlite IRA910, in the presence of sulfate anions was the subject of current study. Batch sorption experiments were carried out to evaluate the influence of operational parameters such as pH, contact time, initial concentration and existence of various anions (including phosphate, sulfate, chloride, fluoride, and nitrate) in the solution on Amberlite IRA910 sorption behavior. Experiments revealed that uranium adsorption was fulfiled at pH>3 and 50 min to amount of 80%. Kinetics study revealed that the pseudo-second-order model showed better curve-fitting regression of the experimental data than the pseudo-first-order one.... 

The performance of a gas centrifuge that is used for isotopes separation is dependent on the gas flow inside it. In this study, for modeling the UF6 gas flow, an Implicit Coupled Density-Based (ICDB) solver, was developed in OpenFOAM. To validate the ICDB solver, the gas flow within the rotor in total reflux state was compared with the analytical solution obtained by Onsager model and the numerical solution obtained by the Fluent software. The results showed that the ICDB solver had acceptable accuracy and validity. Also the computational efficiency of Roe, AUSM (Advection Upstream Splitting Method) and AUSM+ up schemes were compared. The results showed AUSM+ up scheme is efficient. Then,... 

The purpose of this study is to investigate production of high quality ammonium uranyl carbonate (AUC) from “uranyl nitrate + ammonium bicarbonate”, or “uranyl nitrate + sodium carbonate” precursor solutions, by controlled injection of ammonium carbonate solution which could be applicable in material testing reactor (MTR) fuel production plant for recycling of rejected uranium oxide powder. The experimental observations revealed: at pHs higher than 6, precipitation proceeds with formation of no intermediate, thus ensuing a better morphology and size distribution of the AUC products. The results of scanning electron microscopy, X-ray diffraction, particle size analysis, and uranium content... 

Crystalline anatase TiO2 nanoparticles were synthesized in the gas phase using an H2O-assisted atmospheric-pressure CVS process. Simultaneous oxidation/hydrolysis of TiCl4 in the H2O-assisted APCVS process demonstrates the feasibility of facile fabrication and the designed synthesis of TiO2 nanoparticles in atmospheric pressure. Kinetics and thermodynamics studies of TiCl4 reactions in the gas phase illustrated oxidation or hydrolysis domination theoretically and were confirmed by experimental runs. Effects of H2O/O2 ratio on the reactions mechanisms, phase formation, size characteristics, morphology, and purity of TiO2 nanoparticles were experimentally studied using various analytical... 

Carbonaceous radioactive waste is produced by adsorption of effluent gases of UF6 production line, on a bed of charcoal. Current research was aimed at developing a process for recovery of uranium from this waste in a laboratory and at pilot scale. As a first step, leaching of uranium from carbonaceous radioactive waste was undertaken by successive steps using Al(NO3)3 and nitric acid, the former used to eliminate corrosivity of the F− ions. The stoichiometry of reaction between F− and Al3+ ions form complexes ranging from AlF2+, AlF2+ to AlF3 depending upon their molar ratio. The results showed that the increase of NO3−/U ratio increased the uranium leaching efficiency. Presence of some... 

Thermodynamic and kinetic studies have been carried out on the adsorption of uranium(VI) by Amberlite IRA-910 resin. The adsorption process has been investigated as a function of adsorbate concentration, solution acidity, contact time, adsorbent dosage, and temperature. The experiments were preformed in batch mode, where uranium initial concentration on the solution samples were 185.5, 277.6 and 456.8 (mg/lit), sulfuric acid concentration range was 0.02-9 (mol/lit) and sorbent dosages were 0.2, 0.3 and 0.5 g. Equilibrium isotherm data were analyzed using Freundlich and Dubinin-Radushkevich isotherm models. The results showed that the adsorption process was well described by Freundlich...