Sharif Digital Repository

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages  

This study presents the bending analysis of functionally graded conical panels under transverse compression with various boundary conditions. Equations was derived using first order shear deformation theory (FSDT) and solved using generalized differential quadrature (GDQ) method. Using this method results in the capability of studying any combinations of boundary conditions on four edges of the panel. Results are compared and validated with the results available in the literature. Effect of boundary conditions, volume fractions, panel length, semi-vertex angle and subtended angle on deflection of the panel was investigated  

Filtered mode shapes are used to detect the presence, location, size and shape of the delaminations in composite laminated plates with various boundary conditions. This method is the extension of a previous study by the authors on the delamination detection in the beams using irregularities of the mode shapes. The mode shapes are filtered to separate the smooth and irregular parts. Presence and situation of delamination affects these separated parts, and these effects are used to detect the delamination. Here, two new indicators, named 'slope of smooth part' and 'irregularities in the slope of smooth part', are introduced to increase the clarity of detected damage and reduce the noisy... 

This paper presents a finite element method (FEM) free and forced lateral vibration analysis of beams made of functionally graded materials (FGMs). The temperature dependency of material properties along with damping had not previously been taken into account in vibration analysis. In the present study, the material properties were assumed to be temperature-dependent, and were graded in the thickness direction according to a simple power law distribution of the volume fractions of the constituents. The natural frequencies were obtained for functionally graded (FG) beams with various boundary conditions. First, an FG beam was assumed to be isotropic (metal rich) and the results were compared... 

In this study, we present a vast boundary condition treatment to simulate gas flow through microfilters using direct simulation Monte Carlo (DSMC) method. We examine the effects of different boundary condition treatments on the density, pressure, and velocity distributions and suggest the best conditions to simulate gas flow through microfilters. We also refine the effects of upstream and downstream locations on the solution. The results show that uniform distributions can be achieved if we apply the inlet/outlet boundary condition at appropriate upstream and downstream distances. We also show that all the suggested boundary conditions suitably predict the pressure drop coefficient factor... 

In the present investigation, the buckling of generally laminated conical shells with various boundary conditions subjected to axial pressure is studied using an analytical approach. The governing equations are obtained using classical shell theory with Donnell assumptions in strain–deformation relations and the principle of minimum potential energy. The differential equations are solved using trigonometric functions in circumferential and power series in longitudinal directions. All types of boundary conditions can be applied in this method. The results are compared and validated with the results available in the literature, and good agreement is observed. Finally, the effects of the... 

Based on the Euler–Bernoulli beam model and the modified strain gradient theory, the size-dependent forced vibration of sandwich microbeams with a functionally graded (FG) core is presented. The equation of motion and the corresponding classical and nonclassical boundary conditions are derived using the Hamilton’s principle. An exact solution of the governing equation is developed for sandwich beams with various boundary conditions and subjected to an arbitrarily distributed harmonic transverse load. Finally, parametric studies are presented to investigate the effects of geometric ratios, length scale parameters, power index, boundary conditions, layup, and thickness of the FG layer on the... 

In this paper, an analytical method is presented in order to determine the static bending response of an axisymmetric thin circular/annular plate with different boundary conditions resting on a spatially inhomogeneous Winkler foundation. To this end, infinite power series expansion of the deflection function is exploited to transform the governing differential equation into a new solvable system of recurrence relations. Singular points of the governing equation are effectively treated by applying the Frobenius theorem in the solution, which in turn permits the use of more-general analytical functions to describe the variation of the foundation modulus along the radius of the plate. Moreover,... 

In the present study, the effect of using magnetorheological elastomer materials and a magnetic field on the dynamic stability of a sandwich beam under a follower force has been investigated for various boundary conditions. The considered sandwich beam consists of a magnetorheological elastomer core constrained by elastic layers. The structural governing equations are derived using Hamilton’s principle and solved by the finite element method. The validity of the result is examined by comparison with those in the literature. The effects of variation in the parameters such as magnetic field intensity and the thickness of the layers on the stability of the sandwich beam are studied. Finally,... 

In this study, frequency simulation and critical angular velocity of a size-dependent laminated rotary microsystem using modified couple stress theory (MCST) as the higher-order elasticity model is undertaken. The centrifugal and Coriolis impacts due to the spinning are taken into account. The size-dependent thick annular microsystem's computational formulation, non-classical governing equations, and corresponding boundary conditions are obtained by using the higher-order stress tensors and symmetric rotation gradient to the strain energy. By using a single material length scale factor, the most recent non-classical approach captures the size-dependency in the annular laminated microsystem.... 

This paper presents buckling analysis of a two-dimensional functionally graded cylindrical shell reinforced by axial stiffeners (stringer) under combined compressive axial and transverse uniform distributive load. The shell material properties are graded in the direction of thickness and length according to a simple power law distribution in terms of the volume fractions of the constituents. Primarily, the third order shear deformation theory (TSDT) is used to derive the equilibrium and stability equations. Since there is no closed form solution, the numerical differential quadrature method, (DQM), is applied for solving the stability equations. Initially, the obtained results for an... 

In this study, the thermal buckling analysis of hybrid laminated plates made of two-layered functionally graded materials (FGMs) that are integrated with surface-bonded piezoelectric actuators referred to as (P/FGM)s are investigated. Material properties for both substrate FGM layers and piezoelectric layers are temperature-dependent. Uniform temperature rise as a thermal load and constant applied actuator voltage are considered for this analysis. By definition of four new analytic functions, the five coupled governing stability equations, which are derived based on the first-order shear deformation plate theory, are converted into fourth-order and second-order decoupled partial differential... 

This paper describes the results of an experimental and numerical study that focused on multi-directional behavior of unreinforced masonry walls and established the requisite of the related proposed design equations. The tests were conducted following several sets of multi-directional loading combinations imposed on the top plane of the wall along with considering monotonic and cyclic quasi-static loading protocols. Various boundary conditions, representing possible wall–roof connections, were also considered for different walls to investigate the influence of rotation of the top plane of the wall on the failure modes. The results of the tests were recorded with a host of high precision data... 

Based on the first-order shear deformation plate theory, two approaches within the extended Kantorovich method (EKM) are presented for a bending analysis of functionally graded annular sector plates with arbitrary boundary conditions subjected to both uniform and non-uniform loadings. In the first approach, EKM is applied to the functional of the problem, while in the second one EKM is applied to the weighted integral form of the governing differential equations of the problem as presented by Kerr. In both approaches, the system of ordinary differential equations with variable coefficients in r direction and the set of ordinary differential equations with constant coefficients in θ direction... 

Dynamic deformations of beams and plates under moving objects have extensively been studied in the past. In this work, the dynamic response of geometrically nonlinear rectangular elastic plates subjected to moving mass loading is numerically investigated. A rectangular von Karman plate with various boundary conditions is modeled using specifically developed geometrically nonlinear plate elements. In the available finite element (FE) codes the only way to distinguish between moving masses from moving loads is to model the moving mass as a separate entity. However, these procedures still do not guarantee the inclusion of all inertial effects associated with the moving mass. In a prepared... 

In this study, buckling and vibrational characteristics of a nanoshell reinforced with graphene nanoplatelets under uniform axial load are investigated. The material properties of the piece-wise graphene-reinforced composites (GPLRCs) are assumed to be graded in the thickness direction of a nanoshell and are estimated using a nanomechanical model. The effects of the small scale are analyzed based on nonlocal stress–strain gradient theory (NSGT). The governing equations and boundary conditions (BCs) are developed using Hamilton’s principle and are solved with assistance of the generalized differential quadrature method. The novelty of the current study is the consideration of GPLRC and size... 

Due to flexibility of thin plates, high-amplitude vibrations are observed when they are subjected to severe dynamic loads. Because of the extensive application of circular plates in industry, attenuating the undesired vibrations is of foremost importance. In this paper, Adaptable Vibration Suppressors (AVSs) as a semi-active control approach were utilized to suppress the vibrations in a free circular plate under the concentrative harmonic excitation. Using mode summation method, the mathematical model of the hybrid system including the plate and an arbitrary number of vibration suppressors was analyzed. By developing a complex multiple-loop algorithm, optimum values for the parameters of... 

Due to flexibility of thin plates, high-amplitude vibrations are observed when they are subjected to severe dynamic loads. Because of the extensive application of circular plates in industry, attenuating the undesired vibrations is of foremost importance. In this paper, Adaptable Vibration Suppressors (AVSs) as a semi-active control approach were utilized to suppress the vibrations in a free circular plate under the concentrative harmonic excitation. Using mode summation method, the mathematical model of the hybrid system including the plate and an arbitrary number of vibration suppressors was analyzed. By developing a complex multiple-loop algorithm, optimum values for the parameters of... 

Hydraulic fracturing is a widely used and efficient technique for enhancing oil extraction from heavy oil sands deposits. Application of this technique has been extended from cemented rocks to uncemented materials, such as oil sands. Models, which have originally been developed for analyzing hydraulic fracturing in rocks, are in general not satisfactory for oil sands. This is due to a high leak-off in oil sands, which causes the mechanism of hydraulic fracturing to be different from that for rocks. A thermal hydro-mechanical fracture finite element model is developed, which is able to simulate hydraulic fracturing under isothermal and non-isothermal conditions. Plane strain or axisymmetric...