Sharif Digital Repository

This thesis was conducted both numerically and experimentally. In the experimental investigations aqueous solutions of high molecular weight Carboxymethylcellulose (CMC) was used. The experimental set-up was composed of a glass syringe, and a piston which can easily move through the syringe. Different die with aspect ratio ranging from 5.25 to 28.8 can be attached to the syringe. The syringe then is filled with the CMC solution with different weight fractions. Then using a force exerting on the piston, the solution comes out of the die and exiting velocity was calculated from weight of CMC solution that exit from die in a definite time. High quality photographs were taken from extrudate... 

The lab-on-a-chip (LOC) devices utilizing electroosmosis for flow actuation are usually encountered with non-Newtonian behavior of working fluids. Hence, studying the flow of non-Newtonian fluids under an electroosmotic body force is of high importance for accurate design and active control of these devices. In this thesis, mixed electroosmotically and pressure driven flow of salivathrough a rectangular microchannel is examined utilizing two viscoelastic constitutive equations, namely PTT and FENE-P models. Since the hydrodynamic entry length is usually negligible for microflows, a hydrodynamically developed flow is considered in the analysis. The governing equations in dimensionless form... 

Dissemination of an analyte under the laminar flows plays a major role in measuring and assessment of biological fluids such as sample preparation in the context of microfluidic systems. Due to the development of manufacturing technology in the Lab-on-a-chip devices, the production of rectangular microchannels with finite aspect ratios and micron and submicron sizes has been provided by which the effect of electrokinetic phenomena on concentration distribution will be magnified in these systems. On the other hand, these biofluids are viscoelastic and show extraordinary flow behaviors, not existing in Newtonian fluids and adopting appropriate constitutive equations these exotic flow behaviors... 

Torsional vibrations of internal combustion engines and reciprocating compressors, is one of the challenges in the design process. It can reduce power of productivity, equipment operating lifetime and increase noise of the system. Torsional viscous damper is a method to reduce torsional vibrations in rotating equipment. In this study, three-dimensional simulations of torsional viscous damper is performed as a matter of FSI, with consider harmonic excitation on the external walls and calculation of damping response inertia ring in CFX software. The viscoelastic non-Newtonian model properties of damping fluid is calculated in MATLAB software with respect to viscoelastic parameters. For... 

In this work, the viscoelastic fluids flow and their short fiber suspensions has been modeled in contraction geometry using conformation models, these models predict behavior of polymeric chains in contraction geometry. Prediction of viscoelastic fluids flow through a contraction is very important, especially in polymer processing where a polymer melt in barrel of an extruder is going to pass through a narrow die. We expect to see an eddy in each corner of barrel. The result has shown that increasing of De number enhances the eddy magnitude; also with making acute angle, we see decreasing of eddy magnitude. Normal stresses and velocity were investigated in contraction and their results had... 

The integrated development of small-scale electronic and mechanical systems has drawn attention, since they lead to increase in speed and decrease in volume of industry dimensions in the manufacturing sector. That is why microelectromechanical systems are highly considered. MEMS are widely used in Microfluidic systems that can be used in medicine, biology and drug injection. Due to the fact that consistent fluid velocity is necessary in biological applications, electroosmotic flow is more important than ever. To investigate the behavior of biofluids, Newtonian models cannot be used and it is required to use models that predict the behavior of these fluids accurately. In this research... 

Nowadays cancer is the second major cause of death in the world after cardiovascular diseases and scientists and researchers are making considerable efforts to fight it. Detection and isolation of circulating tumor cells in the blood is of paramount importance as it can be further used to measure the disease severity as well as efficacy of chemical drugs. Magnetophoresis has attracted researchers because of its simplicity, high effectiveness and non-invasiveness. Microfluidic systems have a high potential for implementing conventional biological methods in a microscale for detection, separation and incubation of CTCs, and they also lead to reduction in costs and required samples. Prior to... 

Taghizadeh Manzari, M. (In this work, a modified Smoothed Particle Hydrodynamics (SPH) method, with a new moving solid boundary treatment approach, is utilized to simulate the particulateflow problems. The renormalized first and second derivative schemes which lead tothe consistency of the method, are also used along with a modification to the continuityequation which prevents the spurious pressure oscillations. The proposed methodis validated by solving benchmark problems of solid body motion in channel flows.There is a good agreement between the obtained results and those reported in theliterature. The convergence of solutions for different domain discretizations is alsoassessed. In order... 

Numerous applications of Lab on a Chips (LOCs) in chemical/biochemical analyses as well as the emergence of advanced methods for their manufacture attracts many researchers’ attention to these micro instruments. Low sample volume consumption and their high controllability are accounted as the main advantage of LOC systems. Micromixers are among the main components of any LOC in which mixing and/or reaction among two components occur. Micromixers have many potential applications in biological and medical sciences, and so they are repeatedly charged by biofluids. Due to sensibility of biofluids, to avoid disintegration, applying electroosmotic flow instead of pressure-induced flow has priority...