Sharif Digital Repository

A green mechanochemical technique has been developed for the synthesis of mixed ammonium silver phosphomolybdate salt, (NH4)1.6Ag1.4PMo12O40.4H2O with sheet-like nanostructure. The reaction was prompted using acetamide/NH4NO3 at room temperature. The change of driving agent to urea at the same conditions led to an epitaxial growth of hierarchical microstructure of this polyoxoanion. The morphological and structural features of the prepared specimens were discussed in detail. The photocatalytic performance of the resulting nanosheets for removing 4-nitrophenol (4-NP) in water under visible light... 

Vertically aligned ZnO nanowires (NWs) hybridized with reduced graphene oxide sheets (rGO) were applied in efficient visible light photoinactivation of bacteria. To incorporate graphene oxide (GO) sheets within the NWs two different methods of drop-casting and electrophoretic deposition (EPD) were utilized. The EPD method yielded effective penetration of the positively charged GO sheets into the NWs to form a spider net-like structure, whereas the drop-casting method resulted in only a surface coverage of the GO sheets on top of the NWs. The electrical connection between the EPD-incorporated sheets and the NWs was checked by monitoring the electron transfer from UV-assisted photoexcited ZnO... 

Vertically aligned ZnO@CdS nanorod heterostructure films with various loadings of CdS nanoparticle shell were synthesized and applied in photoinactivation of Escherichia coli bacteria under visible light irradiation. While neither the bare ZnO nanorods (with band-gap energy (Eg) of ∼3.28 eV) under visible light irradiation nor the nanorod heterostructures in dark exhibited any significant antibacterial activity, the ZnO@CdS nanorod heterostructures (with Eg ∼2.5-2.6 eV) could successfully inactivate the bacteria under visible light irradiation. Furthermore, it was found that an optimum loading of the CdS shell (corresponding to the effective thickness less than ∼15 nm) is required to achieve... 

We report the nanoporous Ag2O based on the copper terephthalate metal–organic frameworks (Ag2O/MOF) photocatalyst. Ag2O/MOF nanostructure was formed via oxygen treatment of Ag/MOF nanoparticles. The resulting Ag2O/MOF photocatalysts were characterised by various techniques. Results showed that the synthesised Ag2O/MOF nanocomposite exhibited dramatic separation of photoinduced electron/hole and excellent photodegradation activity under visible light irradiation. The degradation rate of acid blue 92 using Ag2O/MOF nanocomposite is found to be higher than that using pure MOF and Ag/MOF. It was divulged that the photodegradation rate is increased by oxygen treatment of Ag in Ag/MOF structure.... 

Antibacterial activity of tungsten oxide nanorods/microrods were studied against Escherichia coli bacteria under visible light irradiation and in dark. A two-step annealing process at temperatures up to 390 °C and 400-800 °C was applied to synthesize the tungsten oxide nanorods/microrods on tungsten foils using KOH as a catalyst. Annealing the foils at 400 °C in the presence of catalyst resulted in formation of tungsten oxide nanorods (with diameters of 50-90 nm and crystalline phase of WO3) on surface of tungsten foils. By increasing the annealing temperature up to 800 °C, tungsten oxide microrods with K2W6O19 crystalline phase were formed on the foils. The WO3 nanorods showed a strong... 

A series of reduced graphene oxide/ZnxCd1-xS (RGO/ZnxCd1-xS) nanocomposites (0 < x < 1) with different ratios of Zn/Cd were synthesized via a facile hydrothermal route under optimized experimental conditions and were carefully characterized by various techniques. Because very little is known about the morphology, specific surface area, and crystal phase effects of RGO/ZnxCd1-xS crystals on their photoresponsivity, field-emission scanning electron microscopy (FE-SEM), BET surface area analysis and X-ray diffraction (XRD) data were studied to investigate their effects on photoactivity. Based on the results, a crystal phase transition from a cubic phase in RGO/Zn0.9Cd0.1S to a hexagonal... 

In this study, for the first time a statistical analysis based on the response surface methodology (RSM) was employed to investigate individual and interaction effects of key operating parameters of the photocatalytic degradation under visible-light irradiation using Ag-S/PEG/TiO2. Ag-S/PEG/TiO2 is a visible-light-driven photocatalyst and was synthesized (based on earlier research) by co-doping of TiO2 with silver and sulphur and addition of polyethylene glycol (as a reagent template). In addition, the model pollutant was methylene orange (MO) and the studied operating parameters included the photocatalyst loading, initial concentration of the pollutant, and pH of the solution. The... 

We report a facile method to synthesize a magnetically separable Pd-rGO/CNT/CaFe2O4 photocatalyst. The incorporation of CNTs into rGO can form a conductive network structure to bridge the gaps between rGO sheets. This conductive network can prevent the restacking of GO nanosheets during the reduction process. Also, for photocatalysis, the aforementioned conjugated network can provide rapid electronic conducting channels. It was found that the Pd-rGO/CNT/CaFe2O4 nanocomposite is an efficient photocatalyst for the Heck-Mizoroki coupling reaction under irradiation of visible light. Interestingly, the electrons which are excited by the photons can be transferred to the palladium nanoparticles... 

We report a facile method to synthesize a magnetically separable Pd-rGO/CNT/CaFe2O4 photocatalyst. The incorporation of CNTs into rGO can form a conductive network structure to bridge the gaps between rGO sheets. This conductive network can prevent the restacking of GO nanosheets during the reduction process. Also, for photocatalysis, the aforementioned conjugated network can provide rapid electronic conducting channels. It was found that the Pd-rGO/CNT/CaFe2O4 nanocomposite is an efficient photocatalyst for the Heck-Mizoroki coupling reaction under irradiation of visible light. Interestingly, the electrons which are excited by the photons can be transferred to the palladium nanoparticles... 

Graphene-tungsten oxide composite thin films with sheetlike surface morphology were fabricated and applied in photoinactivation of viruses under visible light irradiation. Using X-ray photoelectron spectroscopy, it was found that the chemically exfoliated graphene oxide sheets incorporated in the tungsten oxide film reduced through a visible light photocatalytic reduction. In addition, annealing the films at 450 °C in air resulted in formation of W-C and W-O-C bonds to obtain graphene-tungsten oxide composite films. The composite films fabricated by this method showed an excellent visible light photocatalytic performance in photoinactivation of bacteriophage MS2 viruses, as compared to... 

While the photocatalytic degradation of various organic compounds under UV light irradiation has been widely investigated, visible-light-induced photocatalytic degradation of low levels of pollutants such as dibenzothiophene (DBT) is occasionally reported. In the present work, lanthanide/polyethylene glycol-modified TiO2 (La/PEG/TiO2) has been successfully synthesized by a sol-gel method. The photocatalyst was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-Vis diffusive reflectance spectroscopy, and energy dispersive X-ray analysis. Moreover, the photocatalytic degradation of DBT under visible light irradiation is... 

Various morphologies of monoclinic CuO powders were synthesized by hydrothermal treatment of copper nitrate, copper acetate or copper sulfate. The synthesized samples were characterized by scanning electron microscopy, X-ray diffractometry, the Fourier transform infrared spectroscopy, and diffuse reflectance spectrophotometry. Antibacterial activity of the samples was studied against Escherichia coli bacteria in dark and under visible light irradiation. Although the different precursors yielded the same band gap energies (≈1.6 eV) for the synthesized CuO samples, they resulted in various morphologies (hierarchy of stabilized micro/nanostructures), specific surface areas, concentrations of... 

A novel visible-light-driven Ag3VO4/Ag3PO4/Ag photocatalyst was successfully synthesized via an anion-exchange reaction and characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse-reflectance spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of prepared catalysts were evaluated by degradation of acid blue 92 (AB92) aqueous solutions under visible light irradiation. The photocatalytic results indicated that the synthesized Ag3VO4/Ag3PO4/Ag hybrid displays a significantly enhanced activity in degradation of acid blue 92 under visible light compared with pure Ag3VO4. The improved... 

The main aim of the present study was to enhance the degradation capacity of Acid Blue 92 (AB92) by visible-light-active Ag3PO4 nanocomposites based on g-C3N4 and Multiwalled Carbon Nanotubes (MWCNTs). The nanocomposites were fabricated through a tunable in situ deposition method. The properties of the resulting samples were investigated by X-ray diffraction, scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The photocatalytic activity results revealed that the Ag3PO4/g-C3N4 heterojunction inorganic/organic composite exhibited an improvement in both efficiency and the rate of AB92 photodegradation in comparison with the others. The enhanced photocatalytic... 

Graphene-supported BiPO4/Ag/Ag3PO4 photocatalyst has been fabricated by simple hydrothermal and impregnation reaction. In BiPO4/Ag/Ag3PO4 based on Reduced Graphene Oxide (RGO), this network renders numerous pathways for rapid mass transport, strong adsorption and multireflection of incident light; meanwhile, the interface between BiPO4/Ag/Ag3PO4 and RGO increases the active sites and electron transfer rate. BiPO4/Ag/Ag3PO4 based on RGO noticeably exhibited high photocatalytic activity than that of BiPO4/Ag/Ag3PO4 and P25 under visible light irradiation for cationic dye (Rhodamine B), anionic dye (methyl orange) and 4-chlorophenol (4-CP) as a neutral pollutant, which are usually difficult to... 

In this study, initially graphene quantum dots (GQDs) were synthesized by an electrochemical technique and hierarchical porous TiO2 were made by a sol – gel method. Subsequently, GQDs/hierarchical porous TiO2 nanocomposites were prepared by two different methods for the purpose of comparison: spin coating (SC) and electrophoretic (EP) deposition. The GQDs/hierarchical porous TiO2 nanocomposites were characterized by various analytical methods including field emission scanning electron microscopy, atomic force microscopy, transmission electron microscopy, high resolution transmission electron microscopy, Fourier transform infra-red spectroscopy, photoluminescence spectroscopy and... 

In this paper, CdS nanoparticles as a visible light active photocatalyst were coupled by NiFe2O4 and reduced graphene oxide (rGO) to form CdS–NiFe2O4/rGO nanocomposite by facile hydrothermal methods. The CdS–NiFe2O4/rGO nanocomposite shows enhanced photocatalytic activity for the degradation of methylene blue (MB) under visible light illumination. In addition to improved photocatalytic performance, this prepared nanocomposite shows increased photostability and is magnetically separable from the aqueous media. The degradation rate constant (kapp) of the optimized photocatalyst, i.e. CdS–NiFe2O4 (0.05)/rGO 25 wt% nanocomposite, was higher than the corresponding CdS and NiFe2O4 nanoparticles by... 

Zirconium based metal-organic frameworks (Zr-MOFs) are promising candidates for photocatalytic wastewater treatment due to their excellent properties such as high chemical and thermal stability and high photodegradation ability. Herein, we report a novel porous TiO2/ZrO2 photocatalyst derived from UiO-66 and Titania hybrids. UiO-66 nanoparticles was synthesized through solvothermal method and utilized as catalyst support to grow TiO2 particles on its surface. The prepared Titania/MOF nanocomposite was calcined to obtain porous TiO2/ZrO2 photocatalyst for degradation of organic pollutants from colored wastewater under LED visible light. The prepared materials were fully characterized with... 

In this study, we synthesized novel visible light photocatalyst MIL-88A/BiOI using depositing BiOI particles on the surface of a metal–organic framework (MIL-88A). Photocatalytic application of binary composite MIL-88A/BiOI was obtained by discoloration of Methylene Blue (MB) and Acid Blue 92 (AB92) in aqueous solution under visible light source. The photodegradation experiments for treating organic dyes show that the MIL-88A/BiOI heterojunction structure possess a higher rate for decomposition of dyes due to the decreased aggregation of the BiOI nanoparticles, effective charge carrier separation and the synergistic effect between MIL-88A and BiOI samples as a heterojunction. Also, the... 

Photocatalytic reduction of CO2 is considered as a promising strategy for production of a wide range of renewable hydrocarbon fuels by solar energy. In this investigation, a series of Ni and Bi doped TiO2 catalysts with different Ni and Bi contents were synthesized by the conventional sol-gel method and tested for CO2 photoreduction under visible light irradiation. Synthesized nano-photo-catalysts were characterized by XRD, FESEM, TEM, DRS, PL, FTIR and BET analyses. BET results indicated that the doping of Ni or/and Bi in the TiO2 framework resulted in BET specific surface area increment with respect to pure TiO2. DRS analysis showed that Ni doped TiO2, Bi doped TiO2, and co-doped samples...