Sharif Digital Repository

This paper presents the results of an experimental and analytical study on the improvements gained in the axial compressive behavior of confined concrete. Among several parameters affecting compressive ductility of confined concrete, including confinement mechanical volumetric ratio, shape and size effect, number of confinement layers, strength of plain concrete and ductility of confining material, the latter was found to play the most important role in determining the ultimate strain and post peak behavior of concrete. Axial compressive tests were performed on small-scale circular or square section concrete columns, which were retrofitted either by CFRP jacket or by two types of... 

This paper presents the results of an experimental study on the flexural behavior of ten 10 × 15 × 120 (cm) steel reinforced high strength concrete beams under deflection control loading conditions. Test variable includes volumetric percentage of steel fibers (0%, 1.5%, 3%, 4%, 5%). The plain concrete strength was 30MPa. The monotonic concentrated load was applied at the center of the beam, the relative deflection was measured, and demec points were used to determine curvature of the beam. Load-deflection and moment-curvature diagrams have been obtained and plotted for each beam individually. Test results indicate that higher fiber content considerably improves flexural behavior and provides... 

This paper presents the results of an experimental study on the application of strapping technique for retrofit of concrete compressive specimens. In this technique, standard strapping devices, which are used in the packaging industry, are applied to post-tension high strength metal strips around the concrete columns. Experimental program included axial compressive tests on 72 cylindrical and prismatic compressive specimens, which were actively confined by pre-stressed metal strips. The effects of various parameters on strength and ductility of confined concrete were studied including compressive strength of concrete, mechanical volumetric ratio of confining strips, post-tensioning force in... 

This paper presents analytical part of an investigation on the application of prestressed strips for concrete confinement. In this paper, an analytical model is proposed to predict the compressive stress-strain curve of strapped concrete as a function of the confinement level. The model was calibrated based on the experimental data of compressive tests which were described in part A of this paper. Various parameters are considered in the proposed model including volumetric ratio, yield strength and ultimate strain of confining material, shape of cross section, strength of plain concrete. Three key points were defined on the stress-stress curve of strapped concrete columns and applied in...