Sharif Digital Repository

High molecular mass of naphthalene make it non-biodegradable and the biological methods for treated the pollutant are much time consuming. In this paper, two methods of ozonation and aeration are used to remove naphthalene. Because of the industrial wastewater has a great range of pH, in this study different concentrations of soluble naphthalene are placed in variable pH conditions, different contact times and changes in amount of aeration and ozonation. ANOVA results indicated a significant difference between two methods. The average removal of naphthalene by use of ozonation is 55 % and 37 % for aeration. As results, the best conditions that naphthalene are removed is in acidic environment... 

There are many activated sludge plants (ASP) in Iran. Most of them are overloaded and as a result their efficiency is very low. A combined laboratory-scale system (5 L reactors) consisting of an up-flow anaerobic sludge blanket (UASB) and aerobic membrane bioreactor (MBR) was operated at 20 and 30°C with pH between 7.6 and 8.4. The experiment was run to optimize treatment of high-strength enriched municipal wastewater of the Ekbatan treatment plant located in west Tehran. The chemical oxygen demand (COD) of the wastewater was enriched due to the addition of molasses and milk powder. To prevent pH fluctuation of the influent, NaHCO3 and K2HPO4 were added to the wastewater. The excess sludge... 

In textile industry, advanced oxidation processes are used for degrading and removing color from dye baths which allow wastewater reuse. In this study, photochemical oxidation processes (UV-A/K2S2O8, UV-C/ K2S2O8) and chemical oxidation process (dark/K2S2O8), were investigated in a laboratory scale photoreactor for decolorization of the Reactive blue 19 (RB19) dye from synthetic textile wastewater. The effects of operating parameters such as potassium persulphate dosage, pH, reaction time and UV source, on decolorization have been evaluated. The results of direct chemical oxidation showed that 50% of the dye was been removed using K2S2O8 in dark condition after 5h reaction time and... 

Distilleries wastewater is an important environmental problem due to its high BOD and COD content, and toxic materials such as phenolic compounds, and low pH. Direct and continuous discharge of this effluent to the soil reduces the quality of soil and destroys agricultural crops. In addition, its discharge to rivers and sea will seriously affect aquatic life. In order to prevent environmental hazards, a number of biological, chemical and physical methods have been introduced for treatment of this wastewater. Chemical and physical methods are based on surface sorption, ion exchange, membrane processes and chemical oxidations. In biological methods, anaerobic processes are more economical than... 

Pilot Moving Bed Biofilm Reactors (MBBRs) fed on synthetic wastewater, were used in order to study nitrification and denitrification of high concentration wastewater. To investigate the stability of the nitrification and denitrification process in moving bed biofilm systems, a hydraulic shock and a toxic shock were applied to the system. These two systems showed high stability and process efficiency did not change significantly, in spite of intensive variation during the applied shocks  

In this paper, a modified activated sludge process using a Fixed Film Aeration Tank (FFAT) was investigated as an improvement for the usual activated sludge or trickling filtration processes. The aeration tank of the system was arranged with fixed parallel saran nets, which were set vertically as supporting media for microbial growth. A carbonaceous solution was brought into contact with microorganisms in the media and was oxidized aerobically. Filamentous microorganisms predominantly grew on the films and the COD removal increased with the increase in accumulated biomass in the system. Simulation of treatment performance in the system was carried out using mathematical models. The... 

The aim of this study is to quantify the water-energy-emissions nexus in wastewater treatment plants (WWTPs). At first, energy auditing is done for two real WWTPs to find out the energy consumption of different plant stages and the energy-saving potentials. The power plant and carbon capture units are taken into account to assess the energy-emission nexus based on emergy flows. Then, the emergy analysis is applied to evaluate the environmental, economic and technical aspects. An emergy performance index (EmIGHG) is presented by the means of emergy flow diagram of the WWTP beside a power plant (considering the electricity production emergy cost) and carbon capture unit (considering the CO2... 

The magnetic adsorbent nanoparticle was modified using cationic surface active agent. Zinc ferrite nanoparticle and cetyl trimethylammonium bromide were used as an adsorbent and a surface active agent, respectively. Dye removal ability of the surface modified nanoparticle as an adsorbent was investigated. Direct Green 6(DG6), Direct Red 31 (DR31) and Direct Red 23 (DR23) were used. The characteristics of the adsorbent were studied using Fourier transform infrared (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The effect of adsorbent dosage, initial dye concentration and salt was evaluated. In ternary system, dye removal of the adsorbent at 90, 120, 150 and 200 mg/L... 

This study aimed to evaluate and compare the performance of wastewater disinfection systems using ultraviolet radiation (UV) and ozonation to improve the secondary effluent quality of Isfahan North wastewater treatment plant. Therefore, the filtered effluent by a pretreatment unit from micro-screen drum filter type with a pore size of 20 µm entered the disinfection pilots containing medium pressure (MP) UV lamps and ozonation system as tertiary treatment. In this study, the irradiation dose of UV (430–3,680 mW/cm2), and injection dose (10–40 mg/L), and contact time (1–15 min) of ozonation were altered. The results showed that the total suspended solids were reduced by 61.27% at the maximum... 

The purpose of this study was to investigate the use of a horizontal packed bed bioreactor, named Biopack, to treat high strength wastewater, such as bakers yeast wastewater. The Biopack system (RBCP) is a modified rotating biological contactor and the system was applied for secondary treatment. The RBCP system produced high treatment efficiencies, COD removal was 94.9% when COD was 472 mg/l and surface organic loading = 0.187 kg COD/m2 per day and surface hydraulic loading = 6 l/m2 per day. Variations of surface hydraulic loading from 6 to 11.9 l/m2 per day produced a decrease in COD removal efficiency from 94.9 to 58.6%. Other factors, such as shock load, retention time and rotational... 

Background: Purified terephthalic acid (PTA) wastewater from a petrochemical complex was utilized as a fuel in the anode of a microbial fuel cell (MFC). Effects of two important parameters including different dilutions of the PTA wastewater and pH on the performance of the MFC were investigated. Methods: The MFC used was a membrane-less single chamber consisted of a stainless steel mesh as anode electrode and a carbon cloth as cathode electrode. Both power density and current density were calculated based on the projected surface area of the cathode electrode. Power density curve method was used to specify maximum power density and internal resistance of the MFC. Results: Using 10-times,... 

This study investigated the diesel and COD removal from oily wastewater by electrocoagulation. Experiments were conducted in a 2-l reactor using aluminum and iron electrodes. Effects of different parameters including pH (3–11), time (10–60 min), voltage (4.5–10.5 V), supporting electrolyte (NaCl concentration), electrode material and initial diesel concentration (3500–11,000 mg/L) were studied in order to evaluate the efficiency of electrocoagulation. Furthermore, the consumption of energy and the amount of sludge produced by this method were evaluated. The highest removal efficiency (COD removal of 99.1 ± 0.2 % and diesel removal of 98.8 ± 0.2 %) was observed under the following conditions:... 

In this research FeCl2/FeCl3/Perlite magnetic nanoparticles (FeCl2/FeCl3/PMNs), as a novel magnetic nanocomposite adsorbent was used for the removal of green malachite (GM) dye from aqueous solution in a batch and fixed bed column. Firstly, FeCl2/FeCl3/PMNs adsorption properties were investigated. Therefore, the solution of FeCl2·4H2O and FeCl3·6H2O by ratio 2/1 was mixed with perlite nanoparticles. The study investigates the effect of process parameters such as pH, adsorbent dosage, contact time and GM dye initial concentration. Next, GM dye was quantitatively evaluated by using the Langmuir, Freundlich and BET isotherms and pseudo-first- and pseudo-second-order kinetic model. The... 

In this study, the performance of an aerobic moving bed biofilm reactor (MBBR) was assessed for the removal of phenol as the sole substrate from saline wastewater. The effect of several parameters namely inlet phenol concentration (200-1200 mg/L), hydraulic retention time (8-24 h), inlet salt content (10-70 g/L), phenol shock loading, hydraulic shock loading and salt shock loading on the performance of the 10 L MBBR inoculated with a mixed culture of active biomass gradually acclimated to phenol and salt were evaluated in terms of phenol and chemical oxygen demand (COD) removal efficiencies. The results indicated that phenol and COD removal efficiencies are affected by HRT, phenol and salt... 

MFI zeolite membranes were prepared on porous α-alumina substrates, using secondary growth of nano-seeded layers. The resulting membranes were characterized by means of Scanning Electron Microscopy (SEM), X-Ray Diffractometry (XRD), and pervaporation performance tests for separation of Benzene, Toluene and Xylene (BTX) mixture from contaminated water. The morphology, thickness, homogeneity, crystal preferential orientation and permeation properties of these membranes have been studied in relation to the seed layers. Successful separation of BTX mixture from water was performed by using the manufactured MFI zeolite membrane. The influence of temperature, feed concentration on the membrane... 

Conventional wastewater treatment systems demand a high cost mechanical aeration. Using algal-bacterial systems helps to reach a cost-efficient treatment method by eliminating mechanical aeration, since algae produce the oxygen needed for treatment process. In this study, two groups of experiments were performed for domestic wastewater treatment processes. For the first group, semi-continuous microalgae-bacterial photo-bioreactors were cultivated. Chlorella Vulgaris and activated sludge (AS) were used as microalgae and bacterial inoculums, respectively. The effect of different algae and AS ratios on the chemical oxygen demand (COD), N-NH4 + and P-PO4 3− removal was studied. The removal... 

This study evaluates the effectiveness of adsorption process by Granular Activated Carbon (GAC) compared with a novel formulation of coagulation - flocculation process for dye removal from textile wastewater. In this regard, acidic, reactive, disperse and direct red dye are used to prepare the synthetic dye. Dominant wave length for each dye is determined by spectrophotometeric method. Using GAC as adsorbent, equilibrium time and adsorption isotherm of each dye are determined with aid of spectrophotometric method. The results show that GAC can not remove dispersed red dye. Acidic red, direct red and reactive red of 5 mg/L concentration are removed by GAC up to %90, %88 and %43 in 30, 60 and... 

The demand for freshwater has enormously risen the water stress in various parts of the globe. Accessibility of clean water is crucial for sustainable development involving socioeconomic and environmental promotion. Considering the fact that 96.5% of all Earth’s water is related to seawater, desalination (producing clean potable water from sea or saline water) can be considered as a leading solution to fulfill water scarcity problem. Among various advanced and conventional techniques, carbon nanotube (CNT) membrane has become an attractive alternate for most of water treatment methods owing supreme features such as easy operationality, low energy and expense requirement, high water... 

Temperature and up flow velocity are regarded as the two main parameters significantly affecting microbial ecology and characteristics of UASB systems. The 2.3 m high and 0.25 m2-cross-section UASB pilot used in this study received slaughtery effluent with SCOD in the range of 2000-5000 mg/L. Temperature was varied in the 28-35 °C mesophilic range using an in-line heat exchanger and three up flow velocities studied were 0.3, 0.57, and 1 m/h without any recycling. At least one-week adjustment time was allowed after any change in the conditions. Since granules had been formed previously, the start-up phase lasted for only two weeks and up flow velocity and temperature was maintained at 0.3 m/h... 

A new magnetic composite was synthesized by integration of ZnFe2O4 and MIL-53(Fe) micro-rods by a solvothermal method. This composite served as a heterogeneous catalyst to overcome the high electron-hole recombination rates of ZnFe2O4 and to enhance the degradation of Direct Red 23 under visible light irradiation. Different analytical techniques, including XRD, FTIR, SEM, DRS, VSM, and PL, were employed to characterize the synthesized heterojunction nanocomposite and to evaluate its photocatalytic activity. The ZnFe2O4/MIL-53(Fe)/Vis-light system resulted in significantly higher dye degradation as compared with pristine ZnFe2O4 and MIL-53(Fe) semiconductors at the optimum pH of 3.1 and...